ページ1に含まれる内容の要旨
TH-42PS9
Operating Instructions
Manual de instrucciones
High Defi nition Plasma Display
Pantalla de Plasma de Alta Defi nición
Model No.
TH-37PH10UK
Número de modelo.
TH-42PH10UK
TH-50PH10UK
TH-58PH10UK
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
La ilustración mostrada es una imagen.
Antes de conectar, utilizar o ajustar este producto, lea completamente est
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
ページ3に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
ページ4に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
ページ5に含まれる内容の要旨
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
ページ6に含まれる内容の要旨
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) 1 2 3 4 • Speakers .................................................. TY-SP37P8W-K* , TY-SP42P8W-K* , TY-SP50P8W-K* , TY-SP58P10WK* 5 5 4 • Pedestal .........................
ページ7に含まれる内容の要旨
Safety Precautions / Maintenance WARNING Securely insert the power cord plug as far as it will go. Setup • If the plug is not fully inserted, heat may be generated Do not place the Plasma Display on sloped or unstable which could cause fi re. If the plug is damaged or the surfaces. wall socket plate is loose, they should not be used. • The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Do not handle the power cord plug with wet hands. Display. • Doing
ページ8に含まれる内容の要旨
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Instruction book Transmitter Remote Control EUR7636070R Transmitter (2 × AA Size) Fixing bands × 2 AC cord Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity ( + and -). + - + - “AA” size Helpful Hint: For frequent remote control users, replace
ページ9に含まれる内容の要旨
Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. (Example: TH-42PH10UK) Speakers (Optional accessories) 1 2 1 SPEAKERS Terminals (L) 2 SPEAKERS AC cord connection (see page 13) Terminals (R) – AC cord fi xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Plug the AC cord into the display unit. Note: Plug the AC cord until it clicks. When disconnecting t
ページ10に含まれる内容の要旨
Connections PC Input Terminals connection (Example: TH-42PH10UK) COMPUTER AUDIO PC IN TH-42PS9 Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and ver
ページ11に含まれる内容の要旨
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. TH-37PH10UK (Example: TH-42PH10UK) COMPUTER 98 7 6 53 4 2 1 SERIAL RS-232C Straight cable TH-42PH10UK, TH-50PH10UK, TH-58PH10UK 13 2 45 67 8 9 D-sub 9p Notes: Pin layout for SERIAL Terminal • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this
ページ12に含まれる内容の要旨
Connections AV & COMPONENT / RGB connection This unit has terminal boards equivalent to BNC Dual Video Terminal Board (TY-FB9BD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. COMPONEN T VIDEO OU T P R Example of input signal source P B Y , P B , P R , RCA-BNC OUT DVD Y adapter plug L Digital TV-SET-TOP-BOX AUDIO (DTV-STB) R OUT R L AUDIO R L AUDIO VIDEO R L AUDIO P R /C R /R P B /C B /B Y/G S VIDEO AUDIO B A AV IN COMPONENT/RGB IN SLOT1 SLOT2
ページ13に含まれる内容の要旨
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display. (see page 9) Connecting the plug to the Wall Outlet Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst. TH-42PWD8 INPUT MENU -/ VOL +/ ENTER/ Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator Power Indicator: Green Example: The screen below is displayed for a while afte
ページ14に含まれる内容の要旨
Basic Controls Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 16) Enter / Aspect button INPUT MENU -/ VOL +/ ENTER/ (see page 16, 19) Main Power On / Off Switch MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen Power Indicator will switch. (see page 16) The Power Indicator will light. Normal Viewing PICTURE SET UP • Power-OFF ....Indicat
ページ15に含まれる内容の要旨
Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. R button (see page 17) POSITION buttons Press the R button to return to previous menu screen. Status button ACTION button Press the “Status” button to display the current system status. Press to make PC 1 1 Input label NORMAL se
ページ16に含まれる内容の要旨
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu 1 Press to select . pressed. (see page 23) PICTURE 1/2 NORMAL NORMALIZE INPUT MENU -/ VOL +/ ENTER/ PICTURE MENU STANDARD PICTURE 25 Each time the MENU button is pressed, the [ from the unit ] BRIGHTNESS 0 COLOR 0 menu screen will switch. TINT 0 Normal Viewing PICTURE SETUP SHARPNESS 5 INPUT MENU -/ VOL +/ ENTER/ SOUND POS. /SIZE PICTURE 2/2 2 1 COLOR TEMP NORMAL 1 Press to select. COLOR MANAGEMENT OFF ON 2
ページ17に含まれる内容の要旨
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access each adjust screen. INPUT MENU -/ VOL +/ ENTER/ Press the R button to return to previous menu. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB To SIGNAL screen for Digital (S VIDEO) (see page 36, 37) COMPONENT (see page 37) (see page 37, 38) (see page 37, 3
ページ18に含まれる内容の要旨
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: • TH-37PH10UK INPUT1A INPUT1B INPUT2 PC SLOT1 is for dual input so that you can select INPUT1A or INPUT1B for INPUT1. INPUT1A : VIDEO signal terminal in SLOT1 INPUT1B : S-VIDEO signal terminal in SLOT1 • TH-42PH
ページ19に含まれる内容の要旨
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: NORMAL ZOOM FULL Panasonic AUTO JUST Note: When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic AUTO cannot be selected. [from the unit] The aspect mode changes each time the ENTER button INPUT MENU -/ VOL +/ ENTER/ is pressed. [During MULTI PIP Operations]
ページ20に含まれる内容の要旨
Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select H-POS / H-SIZE / V-POS / V-SIZE / 2 CLOCK PHASE. Press to adjust POS. /SIZE. 3 During “VIDEO (S VIDEO)”, “COMPONENT” and “Digital” input signal. POS. /SIZE 4 Press to exit from adjust mode. NORMALIZE NORMAL 0 H-POS Notes: 0 H-SIZE 0 • Adjustment details are memorized separately for different input signal formats V-POS 0 V-SIZE (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i
