ページ1に含まれる内容の要旨
Security Systems
Addendum
DVR670 Installation and Operation manual AM18-Q0617
Security Warning
The remote system access feature, designed to allow users to view their video via a PC or phone, may
compromise their security devices and expose them to malicious use.
To avoid putting your devices and personal information at risk, always consult your network specialist for advice
on network security infrastructure (i.e. MAC filtering, Access Control List).
Bosch accep
ページ2に含まれる内容の要旨
• An HD camera can be used for recording SD stream 2 for eventual recording and playback on the DVR. Display the live HD stream with Bosch Video Client. • Live and recorded audio from an IP camera is not supported. • The IP feature will be available on a DVR 670 platform using a simple FW upgrade, and is free of charge (no licence required). • Previous IP cameras firmware 5.60 is not supported for this release. Please use 5.52, 5.70 or 5.80. • To display the archived video from the IP cam
ページ3に含まれる内容の要旨
Step 1. Enter the DVR ‘Camera-Camera’ menu. In the Camera-Camera screen (see Figure 1) click on the row for the required channel (the row will be selected). Now click the Enable column to toggle between Off, On and IP camera (Off = disabled; On = analog camera). When IP camera is selected, click the Setup button in the bottom right of the screen. A new dialog box appears asking you to save the change configuration settings; press OK. Wait for the ‘Configuration’ screen – see Step 2.
ページ4に含まれる内容の要旨
Step 2. When the ‘Configuration’ screen appears (see Figure 2), click the Auto Detect button to scan for all the IP cameras in the same subnet. A new ‘Assign’ screen appears – see Step 3. Figure 2 Note: If required, choose Manual Setup to manually assign the correct IP camera configuration settings in the appropriate fields (including IP Address, Video Port, Command Port, User Name and Password). PAGE 4 OF 9
ページ5に含まれる内容の要旨
Step 3. When the new ‘Assign’ screen appears (see Figure 3), click on the row containing the required IP camera from the list (the row will be selected). Now click the Assign button to assign the chosen IP camera to the currently selected channel (shown on top of the screen). A ‘Setup’ screen will appear – see Step 4. Figure 3 Note: If required, choose Refresh to rescan the IP cameras in the same subnet. PAGE 5 OF 9
ページ6に含まれる内容の要旨
Step 4. In the ‘Setup’ screen, assign the required Stream (1 or 2), Video Port (default 554), Command Port (default 80), plus correct User Name and Password. When ready, click the OK button. Figure 4 Note: If required, use the Undo button to disconnect an assigned IP camera and channel number. After completing all the assign steps, the ‘Configuration’ screen will reappear (see Figure 5). PAGE 6 OF 9
ページ7に含まれる内容の要旨
Figure 5 Press the Connect button to make the IP connection between the camera and selected channel. If the IP camera resolution settings are supported by the DVR, then a picture of the camera will appear in the box on the right of the screen. Supported resolutions are: IPS Resolution NTSC ≤ 30 IPS ≤ 702 x 576 (SD/D1/4CIF) PAL ≤ 25 IPS ≤ 702 x 480 (SD/D1/4CIF) If the camera settings are not supported, an error dialog box will appear - see Figure 6. PAGE 7 OF 9
ページ8に含まれる内容の要旨
Figure 6 Click OK to acknowledge the message and then change the settings in the IP camera to obtain acceptable resolution settings (see the camera Operator Manual for how to do this). When the camera is correctly connected, press Exit, then OK to save all settings and return to the Camera- Camera screen (see Figure 1). PAGE 8 OF 9
ページ9に含まれる内容の要旨
© Bosch Security Systems, 2013 Version 1.1 2013.06 Doc. No.: AM18-Q656 Subject to change PAGE 9 OF 9
