ページ1に含まれる内容の要旨
®
EH2500 Series
Window and Heater
Assembly Replacement Kit
Installation/Operation Manual
C1491M (7/98)
1.0 WARNINGS Prior to installation and use of this product, the following WARNINGS should be
observed.
1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2. Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of elec
ページ2に含まれる内容の要旨
1.1 UNPACKING Unpack and inspect all parts carefully. INSTRUCTIONS The following items are supplied: 1 Installation/Operation Manual (C1491M) 1 EH2500 Series Window and Heater Assembly Replacement Kit; 120 VAC, 24 VAC, or 230 VAC Be sure to save the shipping carton, boxes and inserts. They are the safest materi- als in which to make future shipments. If an item appears to have been damaged in shipment, replace it properly in its box and contact the factory at 1-800-289-9100 or 1-559-
ページ3に含まれる内容の要旨
5. Remove the O-ring from the viewing window and install the O-ring in the re- placement viewing window by performing the following steps: a. Be careful not to damage the O-ring when it is removed. If you have trouble removing the O-ring, carefully insert a flat blade screwdriver in the O-ring groove and pull the O-ring out. b. Examine the O-ring for wear. Install the O-ring into the O-ring groove in the replacement viewing window. If you notice wear, order the EH25/ 8104ORKIT O-ring kit. 6. Pos
ページ4に含まれる内容の要旨
4.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. ® • Three years on Genex Series products (multiplexers, server, and keyboard). ® • Three years on Camclosure and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3
