Linear TMD-90の取扱説明書

ページ1に含まれる内容の要旨

The transmitter is powered by four Duracell “AA” MN1500 1.5-volt
DESCRIPTION The TMD-90 is a passive infrared (PIR)
alkaline batteries (included) and can power the unit for up to 5 years.
motion detector with a built-in supervised, digitally-coded radio
INSTALLATION TIPS
TMD-90 When the battery voltage gets low, a low battery report is sent to the
SX
transmitter designed for security applications.
FORMAT!
receiver with any alarm, test or status report.
The PIR detects motion in its detection pa

ページ2に含まれる内容の要旨

Alarm Low Battery Open Supervisory Trouble Bypass Tamper Power STEP 9 Walk test. Walk test the unit by walking across the STEP 10 Adjust detection pattern. If the detection STEP 11 Program transmitter into receiver. Refer to the STEP 12 Replace and lock cover. Replace the unit’s detection pattern from both sides. The red LED should light as you pattern is too high or low, loosen the adjustment post and slide instructions supplied with the supervised receiver to program the cover and secure it wi