ページ1に含まれる内容の要旨
MICRO COMPONENT SYSTEM
–Consists of CA-UXH300 and SP-UXH300
UX-H300
INSTRUCTIONS
LVT1193-007A
[US]
UX-H300[US]cover3.p65 1 5/19/04, 11:52 AM
English
ページ2に含まれる内容の要旨
Warnings, Cautions and Others CAUTION— (STANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY lamp lights red. • When the unit is turned on, the STANDBY lamp goes off. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not
ページ3に含まれる内容の要旨
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT ! UNSICH
ページ4に含まれる内容の要旨
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Power sources About This Manual • When unplugging the unit from the wall outlet, always pull This manual is organized as follows: on the plug, not the AC power cord. • This manual mainly explains operations using the DO NOT handle the AC power cord
ページ5に含まれる内容の要旨
Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ................................................................................. 6 Connecting AM and FM Antennas ...........................
ページ6に含まれる内容の要旨
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view 1 COMPACT DIGITAL AUDIO OPEN 2 DAILY TIMER/SNOOZE 3 Front view q 4 COMPACT DIGITAL AUDIO 5 STANDBY VOLUME 6 — + CD TAPE FM/AM AUX 7 w #/8 PHONES DOWN UP AUX 4 7¢ REC 8 e r PUSH OPEN 9 AUTO REVERSE t p MICRO COMPONENT SYSTEM 3 01-05_UX-H330&H300[US]3.p65 3 5/19/04, 11:56 AM English
ページ7に含まれる内容の要旨
Continued Display window w 16 2345 789pq REC SLEEP SNOOZE MONO ST MP3 SOUND BASS REC ON OFF DAILY 123 MHz kHz ALL GR. PRGM RANDOM TOTAL REMAIN A.STANDBY e r ty u i o ; a See pages in parentheses for details. Main unit Display window 1 Disc cover (11) 1 DAILY 1/2/3 (timer number) indicators 2) OPEN (disc cover open) (11) 2 (timer) indicator 3 DAILY TIMER/SNOOZE button (21) 3 ON/OFF (timer on-time/off-time) indicators 4 Remote sensor (5) 4 REC (recording timer) indicator 5 STANDBY lamp (9) 5 (gro
ページ8に含まれる内容の要旨
Remote Control See pages in parentheses for details. 1 STANDBY/ON button (9, 21) 2 SLEEP button (22) 3 CLOCK/TIMER button (9, 20) 4 SET button (9, 16, 20, 21) 5 CANCEL button (20, 21) w 6 Source buttons STANDBY/ON DISPLAY FM MODE A. STANDBY • CD 3¥8, TAPE 2 3, FM/AM, AUX e 1 Pressing one of these buttons also turns on the unit. r SLEEP 7 RANDOM button (14) 123 2 8 PROGRAM button (12, 13) CLOCK /TIMER 9 Multi control buttons 456 3 t • PRESET GROUP /UP, PRESET GROUP /DOWN SET •4, 7, ¢ 78 9 4 p S
ページ9に含まれる内容の要旨
FM ANTENNA AM LOOP Do not connect the AC power cord until all other Getting Started connections have been made. Continued Unpacking Connecting Speakers After unpacking, check to be sure that you have all the You can connect the speakers using the speaker cords. following items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) 1 2,3 • AC plug adaptor (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Con
ページ10に含まれる内容の要旨
Do not connect the AC power cord until all other connections have been made. When the audio equipment has pin jacks for audio output: To remove the speaker grilles Be sure that the pin plugs of the audio cords are colored— The speaker grilles are removable as the illustration below. white plugs and jacks are for left audio signals, and red ones for right audio signals. Holes Projections Adjusting the Voltage Selector Before plugging in the unit, set the correct voltage for your area with the vol
ページ11に含まれる内容の要旨
Putting the Batteries into the Remote Control • DO NOT use an old battery together with a new one. Insert the batteries—AAA/UM-4/R03—into the remote • DO NOT use different types of batteries together. control by matching the polarity (+ and –) on the batteries • DO NOT expose batteries to heat or flame. with the + and – marking on the battery compartment. • DO NOT leave the batteries in the battery When the remote control can no longer operate the unit, compartment when you are not going to use
ページ12に含まれる内容の要旨
Common Operations To adjust the clock Setting the Clock On the remote control ONLY: Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “0:00” starts flashing on CLOCK 1 Press CLOCK/TIMER repeatedly /TIMER the display. to show the current time indication. You can set the clock when the unit is either turned on or in The hour indication starts flashing. standby mode. 2 Repeat steps 2 and 3 on the left column. On the remote control ONLY: CLOCK 1 Pres
ページ13に含まれる内容の要旨
Selecting the Source Selecting the Sound Modes To select the source, press CD 6, TAPE 2 3, FM/AM, or You can select one of the 4 sound modes. AUX. • This function also affects the sound from headphones. • When you select CD as the source, playback starts • This function only affects the playback sound, and does not automatically. affect your recording. To operate the CD player, see pages 11 to 14. To operate the tape deck, see page 15. On the remote control ONLY: To operate the tuner (FM or AM),
ページ14に含まれる内容の要旨
Playing Back Discs This unit has been designed to play back the following Playing Back the Entire Disc—Normal Play discs—CD, CD-R, and CD-RW. You can play back the discs containing the tracks in music 1 Press ) OPEN on top of the unit. CD format or MP3 files in ISO 9660 format. The disc cover opens. • In this instruction, we call a disc recorded MP3 files “MP3 • You can insert a disc while listening to another source. disc,” and “file” is also referred to as “track.” 2 Place a disc correctly wit
ページ15に含まれる内容の要旨
Continued To remove the disc, press ) OPEN on the unit, then take out To locate a particular point in a track UP the disc by holding it at the edges while pressing the unit’s During play, press and hold ¢ or 4 (or PRESET GROUP pivot lightly. UP ¢ or DOWN 4 on the unit). DOWN PRESET •¢ (UP ¢): Fast-forwards the GROUP tracks. •4 (DOWN 4): Fast-reverses the • If the disc cannot be read correctly (because it is scratched, tracks. for example) or an unreadable CD-R or CD-RW is inserted Playback wil
ページ16に含まれる内容の要旨
Repeating Tracks—Repeat Play 4 Repeat step 3 to program other tracks you want. You can have all the tracks, the program or individual track currently playing, repeat as many times as you like. CD 5 Press CD 3/8. 3/8 The tracks are played in the order you have On the remote control ONLY: programed. REPEAT Press REPEAT repeatedly before or during playback. • Each time you press the button, Repeat Play changes as follows, and the following repeat If you try to program a 41st track indicators light
ページ17に含まれる内容の要旨
Playing at Random—Random Play Displaying the Remaining Time during Playback You can play the tracks at random. You can display the remaining time of the current track/disc On the remote control ONLY: and the elapsed time of the current track/disc during playing. RANDOM Press RANDOM. On the remote control ONLY: The RANDOM indicator lights up on the display. REMAIN Press REMAIN repeatedly. When playing back audio CD: RANDOM • Each time you press the button, the display changes as follows, and the
ページ18に含まれる内容の要旨
Playing Back Tapes Playing Back a Tape If no cassette is inserted when you press TAPE ¤ ‹ You can play back type I tapes only. “NO TAPE” appears on the display. UP PRESET 1 Press PUSH OPEN. GROUP To stop playing, press 7. PUSH OPEN The cassette holder opens. DOWN PRESET GROUP DOWN UP 4 7 ¢ UP To fast-wind to the left or to the right, PRESET GROUP press ¢ or 4 (or UP ¢ or DOWN DOWN 4 on the unit). PRESET GROUP 2 Put a cassette in with the exposed part of the The tape direction indicator ( 3 or 2
ページ19に含まれる内容の要旨
Listening to FM and AM Broadcasts Continued To stop during searching, press ¢ or 4 (or UP ¢ or Setting the Tuner Interval Spacing DOWN 4 on the unit). You can only change the FM or AM tuner interval spacing while tuning in to a FM or AM station. When you repeatedly press ¢ or 4 (or UP ¢ or DOWN 4 on the unit) On the unit ONLY: The frequency changes step by step. FM/AM 1 Press FM/AM to select either “FM” or “AM.” To change the FM reception mode On the remote control ONLY: DOWN UP 4 7 ¢ FM MODE 2
ページ20に含まれる内容の要旨
UP PRESET Tuning in to a Preset Station GROUP 3 Press PRESET GROUP or PRESET GROUP to select a DOWN On the remote control ONLY: PRESET preset number, then press SET. GROUP FM/AM The preset station is stored in memory. 1 Press FM/AM to select either “FM” • Even if you do not press SET, the station or “AM.” will automatically be stored on the selected The unit automatically turns on and tunes in to preset number 5 seconds later. the previously received station—either FM or AM. • Each time you pr
