ページ1に含まれる内容の要旨
ARMED 1 OFF 2 AWAY 3 STAY
READY 4 MAX 5 TEST 6BYPASS
7 INSTANT 8 CODE 9 CHIME
READY 0 #
OFF
ON
®
K5895V2 6/03
ARMED 1 OFF 2 AWAY 3 STAY
READY 4 MAX 5 TEST 6 BYPASS
7 INSTANT 8 CODE 9 CHIME
READY 0 #
ページ2に含まれる内容の要旨
– 2 –
ページ3に含まれる内容の要旨
TABLE OF CONTENTS SYSTEM OVERVIEW ....................................5 How User Codes Affect the Common General .......................................................5 Lobby ........................................................26 A Partitioned System ..................................5 ACCESSING OTHER PANELS ...................27 Panel Linking ..............................................6 Single-Partition Single-Panel Mode..........27 Zones............................................
ページ4に含まれる内容の要旨
Arming ......................................................43 SETTING THE TIME AND DATE.............61 Disarming .................................................43 TESTING THE SYSTEM .............................62 CHIME MODE..............................................44 Using the 5 TEST Key.........................62 Using the 9 Key ...................................44 Testing Your System ................................62 VIEWING CENTRAL STATION FIRE ALARM SYSTEM..........
ページ5に含まれる内容の要旨
System Overview General Congratulations on your ownership of an ADEMCO Partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. ADEMCO is the world's largest manufacturer of security systems and millions of premises are protected by ADEMCO systems. This system offers you three forms of protection: burglary, fire and emergency. To realize the system's full potential, it is important that you feel comf
ページ6に含まれる内容の要旨
System Overview (cont’d) A Partitioned System Simply stated, a partitioned system shares one physical alarm system among different users, each with their own requirements. For the most part, you as a user need not know about other users and their structure in the system, but from time to time, you may see display messages that indicate the system is in use by another user. Do not be concerned, this is normal. Refer to the ACCESSING OTHER PARTITIONS section for additional information. P
ページ7に含まれる内容の要旨
System Overview (cont’d) Burglary Protection The burglary protection portion of your system must be turned on or "armed" before it will sense burglary alarm conditions. Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the rest of the system armed. The system also provides a CHIME mode, for alerting users to the opening and closing of doors and windows while the system is dis
ページ8に含まれる内容の要旨
System Overview (cont’d) Speed Key (Macros) The system can store a string of up to 32 keystrokes, which can be activated anytime by simply pressing the “A, B, C, or D” keys. This feature can be used to make it easy to perform multiple functions at once (such as going to another partition to bypass a zone), or it can be used to simplify an everyday, repeated procedure. Refer to the SPEED KEY section for procedures for using this feature. Using Schedules Your system may have been progra
ページ9に含まれる内容の要旨
System Overview (cont’d) Master Keypad Operation A "Master" keypad is one on which the status of all 8 partitions is displayed simultaneously. A user can get more information about a certain partition by simply entering [✳] + the desired partition number (1-8). To log on to the "Master" partition (9) using the GOTO command, and to perform any functions at a Master keypad, a user must have access to all partitions. Self-Help Feature Abbreviated user's instructions are built into the s
ページ10に含まれる内容の要旨
About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a safe location nearby. NOTE: If you have a Symphony (Advanced User Interface) and/or TeleSmart connected to your system, refer to the Symphony and TeleSmart User Guides for operating instructions for those units. Your keypads allow you to control all system functions. The keypads feature
ページ11に含まれる内容の要旨
Functions Of The Keypad LCD DISPLAY SPEAKER ARMED A 1 OFF 2 AWAY 3 STAY LEDS READY B 4 MAX 5 TEST 6 BYPASS C 7 INSTANT 8 CODE 9 CHIME READY 0 # D FUNCTION KEYS IMPORTANT!: When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapses without a key depression, the entry is aborted and must be repeated from its beginning. – 11 – 6160-00-002-V1
ページ12に含まれる内容の要旨
Functions Of The Keypad (cont’d) ALPHA DISPLAY WINDOW: A 2-line, 4 MAXIMUM : Arms in manner similar 32-character Liquid Crystal Display (LCD). to AWAY mode, but eliminates the entry Displays protection point identification and delay period, thus providing maximum system status, messages, and user protection. An alarm will occur instructions. immediately upon opening any protection 1 OFF : Disarms the burglary portion of point, including entry delay zones. the system, silences
ページ13に含まれる内容の要旨
Functions Of The Keypad (cont’d) KEYS 0-9: Used to enter your individual 9 CHIME : Turns on & off the CHIME security access code(s). mode. When on, any entry through a LED READY INDICATOR: (GREEN) Lit protected delay or perimeter zone while the indicates system is ready to be armed, system is disarmed will cause a tone to while unlit indicates system not ready. sound at the Keypad(s). LED ARMED INDICATOR: (RED) Lit ✳ READY : When depressed prior to when the system has been
ページ14に含まれる内容の要旨
Entry/Exit Delays General Information Your system has installer-programmed time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period. Entry Delay gives you time to disarm the system wh
ページ15に含まれる内容の要旨
Security Codes & Authority Levels General Information At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system. The authority level defines the system functions that you can perform. As an additional safety feature, other users that do not have a need to know your code can be assigned different security codes, and each user can be given
ページ16に含まれる内容の要旨
Security Codes & Authority Levels (cont’d) Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below. Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level users.
ページ17に含まれる内容の要旨
Security Codes & Authority Levels (cont’d) General Rules on Authority Levels and Changes x A user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned. x A user may only ADD users to a LOWER authority level. x A user may assign access codes only to those partitions to which the user adding the code has access. (ex. a user with access to only partition 1 cannot assign codes in partition 2.) x The only way to assign a user's authority level is
ページ18に含まれる内容の要旨
Security Codes & Authority Levels (cont’d) To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones). CODE 1. Enter Master or Manager code and press the 8 key. 2. Enter the new user's 3-digit User Number (002-250). 3. Enter 4-digit security code for that user. The following prompts will appear. Enter 1 to add a new user code. Entering 0 will ADD NEW USER? change the existing user's code
ページ19に含まれる内容の要旨
Security Codes & Authority Levels (cont’d) If you as a user have access to other partitions, the MULTI-ACCESS ? keypad will prompt for ability of this new user to 0 = NO , 1 = YES access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user. Press 1 (YES) if this user will be allowed to try to GLOBAL ARM ? arm more than one partition at the same time.
ページ20に含まれる内容の要旨
Security Codes & Authority Levels (cont’d) When all partitions have been displayed, the PART. 1 A0* WHSE keypad will scroll through the partition(s) to which USER 003 AUTH=3G. access has been assigned, and will display the user number, authority level and global arm option for each. The “G” after the authority level indicates that the global arm feature is active for this user in the displayed partition. The "*" indicates the partition from which this user can be changed or delet
