ページ1に含まれる内容の要旨
USER'S
MANUAL
FA120C Security System
N5100-3V3 9/96
ページ2に含まれる内容の要旨
TABLE OF CONTENTS SYSTEM OVERVIEW .................................................................................................................................. 4 Keypads ................................................................................................................................................... 4 Zones ....................................................................................................................................................... 4 Alarms ........
ページ3に含まれる内容の要旨
(continued) TABLE OF CONTENTS DISARMING THE SYSTEM AND SILENCING ALARMS (Using the 1 OFF Key)............................................. 20 USING THE KEYSWITCH ...........................................................................................................................21 CHIME Key) ........................................................................................................22 CHIME MODE (Using the 9 PANIC KEYS ..........................................................
ページ4に含まれる内容の要旨
SYSTEM OVERVIEW General Congratulations on your ownership of a First Alert Professional Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today, including microcomputer technology to monitor all system status. Basically, this system offers you three forms of protection: burglary, fire and emergency. Your system may consist of at least one keypad which provides full control of system operation, plus various devices such as
ページ5に含まれる内容の要旨
(continued) SYSTEM OVERVIEW Alarms When an alarm occurs, both the keypad and external sounders will sound, and a message at the keypad will identify the zone(s) causing the alarm. In addition, if your system is connected to a central monitoring station, an alarm message will be sent. To stop the alarm sounding, you simply disarm the system. Fire Protection The fire protection portion of your security system (if used) is always on and will sound an alarm if a fire condition is detected. Refer to
ページ6に含まれる内容の要旨
ABOUT THE KEYPADS Keypad Types All commands and procedures described herein are illustrated for Fixed- Word Display keypads, however, an Alpha Display keypad (with a 2-line LCD display for more detailed protection point identification and system status, but with similar commands and procedures) is available and might have been used instead. Keypad Styles Fixed-Word keypads are available in two styles, A and B, either of which may have been used in your system. Although different in appearance, b
ページ7に含まれる内容の要旨
SUMMARY OF SYSTEM STATUS DISPLAYS AWAY All burglary zones, interior & perimeter, are armed. NO AC AWAY CHIME STAY STAY Perimeter burglary zones, such as windows 00 00 BAT 00 INSTANT and doors are armed. ALARM BYPASS INSTANT Perimeter burglary zones armed and entry CHECK FIRE NOT READY delay is turned off. BYPASS One or more burglary protection zones have STYLE A KEYPAD DISPLAY been bypassed. NOT READY Appears when burglary portion of the system is not ready for arming (due to one or more open pr
ページ8に含まれる内容の要旨
SUMMARY OF KEYPAD FUNCTIONS 1. DISPLAY WINDOW: Displays protection zone ID 9. 8 CODE KEY : Used to assign additional user and system status messages. codes for other users of the system. 2. 1 OFF KEY : Disarms burglary portion of the sys- 10. 9 CHIME KEY : Turns CHIME mode on and off. tem, silences alarms and audible trouble When on, the opening of windows or doors while indicators, and clears visual display after the system is disarmed will sound 3 beeps at the problem's correction. keypad(s).
ページ9に含まれる内容の要旨
15. ARMED INDICATOR: (RED). Lit when the system has been armed (STAY, AWAY 1 INSTANT or MAXIMUM). NO AC AWAY BYPASS NOT READY 16. INTERNAL SOUNDER: ALARM STAY CHIME BAT 17 CHECK INSTANT FIRE The built-in keypad sounder mimics the alarm 15 sounder during alarms, and will also "beep" during certain system functions. (see SUMMARY OF 3 A B 14 AUDIBLE/ VISUAL NOTIFICATION). ARMED 4 17. EMERGENCY KEYS: READY C D 2 Individual keys A, B, and C (key D not used). OFF AWAY STAY On some keypads, these k
ページ10に含まれる内容の要旨
SECURITY CODES General At the time of installation, your installer programmed a personal four-digit Master code, known only to you and yours. This code is used to perform most system functions, including arming and disarming of the system. As an additional safety feature, temporary user codes can be assigned (see next page) for use by those not having a need to know the Master code. Note that the Master code remains in effect even when other user codes are assigned. Duress Code This feature is i
ページ11に含まれる内容の要旨
SECURITY CODES To Assign, Change, 1. Enter your Master code and press the CODE key. or Delete 2. Enter single-digit User Number (2Ð7) for which a code is to be User Codes assigned, changed, or deleted. 3. If assigning or changing a user's code, enter the desired 4-digit code for use by that User Number. The keypad will beep once. 4-DIGIT USER CODES If deleting a user's code, perform steps 1 & 2 and stop. In a few It is recommended that moments the keypad will beep once, indicating that the exist
ページ12に含まれる内容の要旨
ENTRY/EXIT DELAYS General Information Your system has preset time delays, known as exit delay and entry delay. When you arm your system, exit delay gives you time to leave through the main door without setting off an alarm. Entry delay gives you time to disarm the system when you reenter through the main door. The system must be disarmed, however, before the entry delay period ends, or an alarm will occur. The keypad will beep slowly during the entry delay period, reminding you to disarm the sys
ページ13に含まれる内容の要旨
CHECKING FOR OPEN ZONES Using the Before your system can be armed, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING ÊÊ ÊÊ READY Key PROTECTION ZONES section), otherwise the keypad will display a "Not Ready" message, and if your keypad has a READY indicator light, it will not be lit. The READY key can be used to display all faulted zones, making it easier for you to secure any open zone. To display faulted zones, simply press and release the READY
ページ14に含まれる内容の要旨
BYPASSING PROTECTION ZONES Using the This key is used when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first. ÊÊ6ÊÊ BYPASS Key 1. Enter your security code and press the BYPASS key. LIMITATION 2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, The system will not 13, etc.). Single digit zone numbers must be preceded by a zero (e.g. allow fire zones to be 05, 06). bypassed. 3. When finished, the keypad will display a
ページ15に含まれる内容の要旨
BYPASSING PROTECTION ZONES Quick Bypass If your system supports "Quick Bypass", it allows you to automatically bypass all open (faulted) zones without having to enter zone numbers in- Ask your installer if dividually. "Quick Bypass" is To use this feature, enter your security code, press the BYPASS key, active for your then stop. In a few moments, all open zones will be displayed along with a system, and if so, "Bypass" message. Wait for all bypassed zones to be displayed, then check here: Ê Ê Ê
ページ16に含まれる内容の要旨
ARMING PERIMETER ONLY WITH ENTRY DELAY ON Use this key when you are staying inside, but expect someone to Using the use an entry/exit door later. STAY Key ÊÊ3ÊÊ 1. Enter your security code and press the STAY key. 2. The keypad beeps three times and displays the armed message. The BEFORE ARMING red ARMED indicator lights. close all doors and windows (see CHECKING FOR OPEN 3. The system arms. An alarm sounds immediately if a protected perimeter ZONES on page 13). window or non-entry/exit door is
ページ17に含まれる内容の要旨
ARMING PERIMETER ONLY WITH ENTRY DELAY OFF Use this key when you are staying inside and do not expect Using the anyone to use an entry/exit door. INSTANT Key ÊÊ7ÊÊ 1. Enter your security code and press the INSTANT key. 2. The keypad beeps three times and displays the armed message. The BEFORE ARMING red ARMED indicator lights. close all doors and windows (see CHECKING FOR OPEN 3. The system arms. An alarm sounds immediately if any protected ZONES on page 13). perimeter door or window is then op
ページ18に含まれる内容の要旨
ARMING ALL PROTECTION WITH ENTRY DELAY ON Use this key when no one will be staying inside. Using the AWAY Key 1. Enter your security code and press the AWAY key. ÊÊ2ÊÊ 2. The keypad beeps twice and displays the armed message. The red ARMED indicator lights. BEFORE ARMING close all doors and windows 3. You may leave through an entry/exit door during the exit delay period (see CHECKING FOR OPEN without causing an alarm. ZONES on page 13). After exit delay, the system arms and sounds an alarm if a
ページ19に含まれる内容の要旨
ARMING ALL PROTECTION WITH ENTRY DELAY OFF Use this key when the premises will be vacant for extended Using the periods of time such as vacations, etc., or when retiring for the night and MAXIMUM Key ÊÊ4ÊÊ no one will be moving through protected interior areas. 1. Enter your security code and press the MAXIMUM key. BEFORE ARMING 2. The keypad beeps twice and displays the armed message. The red close all doors and windows ARMED indicator lights. (see CHECKING FOR OPEN ZONES on page 13). 3. You m
ページ20に含まれる内容の要旨
DISARMING THE SYSTEM AND SILENCING ALARMS Using the The OFF key is used to disarm the system and to silence alarm and trouble sounds. ÊÊ1ÊÊ OFF Key To Disarm the System IMPORTANT: Enter your security code and press the OFF key. The "Ready" message If you return and the will be displayed, and the keypad will emit a single tone to confirm that the main burglary sounder system is disarmed. is on: DO NOT ENTER, but To Silence a Burglary Alarm CONTACT THE POLICE from a nearby safe location. SEE IMPOR
