ページ1に含まれる内容の要旨
DINION capture 5000/7000
VER Series
en Installation Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
DINION capture 5000/7000 Table of Contents | en 3 Table of Contents 1Safety 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important notices 9 1.4 FCC & ICES compliance 13 1.5 Bosch notices 15 2 Description 16 2.1 Parts List 16 3 Installing the DINION capture 17 3.1 Determining the Range 17 3.2 Determining the Angle 18 3.3 Mounting the DINION capture 20 3.4 Preparing the Wiring 23 3.4.1 Power Input Connections 23 3.4.2 Video Connections 23 3.5 Making the Connections 24 3.6 Au
ページ4に含まれる内容の要旨
4 en | Table of Contents DINION capture 5000/7000 4.5.6 Color submenu (Overview Camera - DINION capture 7000 only) 43 4.5.7 VMD submenu 44 4.6 Install menu structure 45 4.6.1 Language submenu 46 4.6.2 Lens Wizard submenu 46 4.6.3 Alarm I/O submenu 47 4.6.4 Connections submenu 48 4.6.5 Test signal submenu 49 4.6.6 Camera ID submenu 50 4.6.7 Privacy masking submenu 51 4.6.8 Defaults submenu 51 A Dimensional Drawings 52 | 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
ページ5に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 5 1Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avo
ページ6に含まれる内容の要旨
6 en | Safety DINION capture 5000/7000 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient but a moist, fluff- free cloth or leather shammy may also be used. Do not use
ページ7に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 7 8. Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord plug is the main power disconnect device for switching off the voltage for all units. 9. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit. – For external power supplied units, use on
ページ8に含まれる内容の要旨
8 en | Safety DINION capture 5000/7000 12. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other hazards. 13. Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition. 14. Installation - Install in accordance with the manufacturer's
ページ9に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 9 1.3 Important notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall and cause serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the c
ページ10に含まれる内容の要旨
10 en | Safety DINION capture 5000/7000 The Exposure Hazard Value for the product (ratio of the Exposure level to the Exposure limit) is up to 1.8 at a test distance of 200 mm or 8 inches. The Hazard Distance (distance beyond which the product falls into the exempt/safe group) is at most 350 mm or 14 inches. Note that typical operating distances for license plate capture (3.8 m or 12.5 feet and greater) are much greater than the Hazard Distance. When servicing the unit, physically disconne
ページ11に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 11 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge. NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic- sensitive printed circuit boards. Fuse rating - For protection of the
ページ12に含まれる内容の要旨
12 en | Safety DINION capture 5000/7000 11-30 VDC / 24 VAC power source: This device is intended to operate with a limited power source; this power source must comply with EN60950. The device is designed to operate at either 11-30 VDC or 24 VAC (if PoE is not available). User supplied wiring must be in compliance with electrical codes (Class 2 power levels). If 24 VAC is used, do not ground the 24 VAC supply at the terminals or at the device's power supply terminals. Connections: The unit
ページ13に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 13 1.4 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: – this device may not cause harmful interference, and – this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur
ページ14に含まれる内容の要旨
14 en | Safety DINION capture 5000/7000 – cet appareil ne peut pas provoquer d'interférence nuisible et – cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement. AVERTISSEMENT: Suite à différents tests, cet appareil s’est révélé conforme aux exigences imposées aux appareils numériques de Classe A en vertu de la section 15 du règlement de la Commission fédérale des communications des
ページ15に含まれる内容の要旨
DINION capture 5000/7000 Safety | en 15 1.5 Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information. Copyright This manual is the intellectual property of Bosch Security Sys
ページ16に含まれる内容の要旨
16 en | Description DINION capture 5000/7000 2 Description The DINION capture is a specialty camera designed to capture consistent, high-quality images of vehicle license plates. Available in IP and analog versions, it is ideal for monitoring parking lots, public areas, and for controlling vehicle access. The DINION capture overcomes the problems encountered when using conventional surveillance cameras in vehicle identification and automatic license plate recognition applications. The Nigh
ページ17に含まれる内容の要旨
DINION capture 5000/7000 Installing the DINION capture | en 17 3 Installing the DINION capture This section provides instructions for mounting and wiring the DINION capture. CAUTION! The selected mounting location should not place the camera in a situation where its environmental specifications could be exceeded. Ensure the selected location is protected from falling objects, accidental contact with moving objects, and unintentional interference from personnel. Follow all applicable buildi
ページ18に含まれる内容の要旨
18 en | Installing the DINION capture DINION capture 5000/7000 Model Capture Optimal HFOV VFOV Range Distance VER-x2R1-1 3.8–6.4 m 4.9 m 31.9° 24.2° (12.5–21.0 ft) (16.0 ft) VER-x2R1-2 23.0° 17.3° VER-x2R2-1 5.5–9.1 m 7.1 m 22.3° 16.8° (18–30 ft) (23.1 ft) VER-x2R2-2 16.0° 12.0° VER-x2R3-1 7.9–13.7 m 10.2 m 15.6° 11.8° (26–45 ft) (33.5 ft) VER-x2R3-2 11.1° 8.3° VER-x2R4-1 11.3–19.5 m 14.8 m 10.8° 8.1° (37–64 ft) (48.4 ft) VER-x2R4-2 7.7° 5.8° VER-x2R5-1 16.5–28.0 m 21.3 m 7.5° 5.6° (54–92 ft) (7
ページ19に含まれる内容の要旨
DINION capture 5000/7000 Installing the DINION capture | en 19 Figure 3.1 Recommended Vertical and Horizontal Mounting Angle 1 DINION capture 2 Capture Range 3 Vertical Mounting Angle 4 Horizontal Mounting Angle If the maximum range is exceeded, then the letters become smaller and more difficult to read. At the maximum range and angle the width of the number plate covers approximately 12% of the width of the screen. NOTICE! The Capture Range is the distance from the license plate camera to
ページ20に含まれる内容の要旨
20 en | Installing the DINION capture DINION capture 5000/7000 3.3 Mounting the DINION capture CAUTION! Installation should only be performed by a qualified service professional in accordance with the National Electrical Code or applicable local codes. For a secure mounting installation, bolts should extend through the mounting surface and be secured with nuts, washers, and lock washers on the opposite side. If studs are used, they should be anchored in concrete or welded to a steel backer
