ページ1に含まれる内容の要旨
...
...
D1760 Series User's Guide
What's in the box? You will also find:
Accessory handset
D1760 base
and charger
with cordless
handset
Not pictured:
• Rechargeable
battery (BT-1021)
• Battery cover
• AC adapter
(PS-0035)
If you purchased You should
model number: have:
D1760 None
D1760-2 1 of each
Battery
D1760-11 10 of each
Not pictured:
cover
D1760-12 11 of each
• Rechargeable
battery (BT-1021)
* If the model number ends in R,
• AC adapter (PS-0035)
your package includes a DRX100
• T
ページ2に含まれる内容の要旨
What’s in the manual? Getting Started ................................ 3 Important Information .................. 14 Installing Your Phone .................................3 Solving Problems .......................................14 Getting to Know Your Phone ...................4 Resetting Handsets .................................. 16 Using the Handset Menu ..........................6 Registering Handsets .............................. 16 Adapter and Battery Information ....... 16 Using Your Ph
ページ3に含まれる内容の要旨
GETTING STARTED Connect the Telephone Cord Installing Your Phone Use the telephone cord to connect Charge the Battery the TEL LINE jack on the base to a 1. Unpack all handsets, standard telephone wall jack. battery Test the Connection packs, and battery 1. Pick up the handset and press covers. If Talk . The handset sounds a dial you need to tone, and the display shows Talk. remove a – If you don't hear a dial tone or cover, press in on the notch and the display says Check Tel Lin
ページ4に含まれる内容の要旨
Getting to Know Your Phone Parts of the Base Find Charging Handset Contacts Key (icon) What it does Find hs • In standby: page all handsets. Parts of the Handset UP PHONEBOOK SPEAKER MENU/SELECT END TALK/FLASH CID DOWN Twelve-key dial pad REDIAL/PAUSE INTERCOM/CLEAR Microphone MESSAGE/MUTE Charging contacts 4
ページ5に含まれる内容の要旨
Key (icon) What it does • In standby or during a call: open the phonebook. PhonEbook • In the menu: go back to the previous screen. ( ) • When entering text: move the cursor to the left. sPEE ak r ( ) • Switch a normal call to the speakerphone (and back). • In standby: start a telephone call (get a dial tone). Talk/Flash • During a call: switch to a waiting call. • In standby: decrease the ringer volume. • During a call: decrease the audio volume. down ( ) • In any menu or list: move the cursor
ページ6に含まれる内容の要旨
Reading the Display Status The table shows the possible icons status icons & what they mean. Current Since the icons appear based call info on what the phone is doing, you won't see all the icons at CID Time & the same time. record date NEW status Icon What it means The signal from the base is 1) strong or 2) weak. The ringer is turned off and will not ring for new calls. The speakerphone is on. Privacy Mode is on: no other handset can join the call. T-coil mode is on (see p. 7). The
ページ7に含まれる内容の要旨
Handset Setup Menu You can change these settings separately for each handset. Turn on T-coil mode to reduce noise on hearing aids T-coil equipped with a telecoil (T-coil) feature. T-coil mode shortens talk time, so keep your battery fully charged. Choose this handset's ring tone. As you highlight each Ringer Tones ring tone, the phone plays a sample. When you hear the tone you want, press MEnu/sElEcT . Turn on personal ring so you can assign a special ring Personal Ring tone to people in yo
ページ8に含まれる内容の要旨
Entering Text on Your Phone • Use the 12-key dial pad anytime you want to enter text into your phone (a name in the phonebook, the handset banner, etc.). • If two letters in a row use the same key, enter the first letter; wait for the cursor to move to the next space and enter the second letter. To... Press... move the cursor left PhonEbook . move the cursor right cid . erase the character at the cursor inTEM rco /clEar . erase the entire entry and hold TE in rcoM/clEar . enter a blank space
ページ9に含まれる内容の要旨
Assigning a Speed Dial Number You can assign a speed dial number to a phonebook entry when you create that entry for the first time (or when you edit it). Press Phon Ebook and select Create New. As you enter the phonebook number, one of the options you will see is to assign a speed dial number to that phonebook entry. You can assign up to 10 speed dials, 0 - 9. Finding a Lost Handset With the phone in standby, press Find hs on the base. All handsets beep for 1 minute; to cancel, press Fin
ページ10に含まれる内容の要旨
To… Press... dial the Talk/Flash or PE s akEr. highlighted (If the number is a toll call but there is no 1 at the number beginning, press to add 1 before dialing.) * close the lists PhonEbook . For individual record options, highlight a number and press MEn/ u s El Ec T: Delete Entry Erase the number from the list. Add the number to the phonebook. The handset prompts Store Into Pb you to edit the name and number and select a personal ring. Delete All (CID list only) Erase all numbers from t
ページ11に含まれる内容の要旨
Adding Phonebook Entries With the phone in standby, open the phonebook. Press ME/ nu s El Ec T and select Create New. Enter a name, number, and then assign a speed dial number and a personal ring if desired. • Enter the phone number (up to 20 digits) exactly as you would dial it. • If you need the phone to wait before sending the next set of digits, press rE dial/ Pusa E to insert a 2-second pause. You can insert multiple pauses, but each one counts as a digit (you’ll see P in the displa
ページ12に含まれる内容の要旨
• If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 16, or see the accessory handset manual. Conference Calling • When an outside call comes in, two handsets can join in a conference call with the outside caller. • To join a call that’s already in progress, just press Talk/ Flash or sPE ak Er . • To leave the conference call, hang up normally; the other handset remains connected to the call. Call Transfer To... Press... inTErcoM
ページ13に含まれる内容の要旨
To... Press... cancel a page End . answer a page TE in M rco /clEar or Talk/Flash . end an intercom call End . Both handsets return to standby. Chain Dialing If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the phonebook to send the code number. 1. Enter the code number (up to 20 digits) into the phonebook just like a regular phonebook entry. Be sure to enter the code number into the phonebook exactly as
ページ14に含まれる内容の要旨
4. To access your provider’s voice mail service now, press MEssga E/Mu TE. The system will dial the voice mail service and you can enter your security code manually when prompted. Editing Your Voice Mail Number You can add your voice mail security code to the voice mail number string. 1. Press MEn/ u sE l EcT , then scroll to Global Setup/Edit Voice Mail. 2. Enter your voice mail number again, then press rE dial/Pusa E twice to enter 2 2-second pauses. Next, enter your security code. 3.
ページ15に含まれる内容の要旨
Audio issues Possible solutions • Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away There’s a lot of from the interference source. noise or static on • If you use a telecoil hearing aid, turn on T-coil mode the line (see p. 7). • If you have any service that uses the phone line, add a DSL or telephone line filter (see below). Caller ID problems Possible solutions • Let calls ring tw
ページ16に含まれる内容の要旨
Resetting Handsets Battery pack (with normal use) If you have trouble with a handset or Part number BT-1021 if you want to replace one, clear the Capacity 300mAh, 2.4V DC registration information from the base Talk time about 7 hours and the handset: Standby time about 7 days 1. Press & hold End and # at the same time until you see the System Reset Battery life about 1 year menu. x Replace the battery when the talk or 2. If you still have the base the handset standby time becomes notic
ページ17に含まれる内容の要旨
line, as determined by the total RENs, Warning! The cords on this contact the telephone provider. The product and/or accessories contain REN for this product is part of the lead, a chemical known to the product identifier that has the format state of California to cause birth US:AAAEQ##TXXXX. The digits rep- defects or other reproductive resented by ## are the REN without a harm. Wash hands after handling. decimal point (e.g., 03 is a REN of 0.3). Uniden works to reduce lead If this eq
ページ18に含まれる内容の要旨
able your alarm equipment. If you have off and on, the user is encouraged to questions about what will disable alarm try to correct the interference by one or equipment, contact your telephone more of the following measures: company or a qualified installer. x Reorient or relocate the receiving Any changes or modifications to this antenna. product not expressly approved by the x Increase the separation between the manufacturer or other party respon- equipment and receiver. sible for co
ページ19に含まれる内容の要旨
D1760 Handset this device may not cause interference, and (2) this device must accept any 1. Install the battery. interference, including interference 2. Once Welcome, Please wait... that may cause undesired operation of disappears from the display, the device. "Privacy of communications press and hold End , MEnu , and * may not be ensured when using this simultaneously. telephone". 3. After about 5 seconds, a confirmation tone sounds, 1-Year Limited Warranty indicating all functio
ページ20に含まれる内容の要旨
handling) incurred by warrantor or its its original packaging). Disconnect representatives in connection with the the battery from the Product and performance of this warranty. Warran- separately secure the battery in its tor, at its option, may replace the unit own separate packaging within the with a new or refurbished unit. THE shipping carton. The Product should LIMITED WARRANTY SET FORTH include all parts and accessories ABOVE IS THE SOLE AND ENTIRE originally packaged with the
