ページ1に含まれる内容の要旨
Quick start guide
LS6375-3 (LS6325-2 and IS6100)
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user’s manual for complete installation and
operation instructions.
Telephone base and handset charger installation
Install the telephone base and handset charger as shown below.
Telephone
Electrical outlet not
wall jack
controlled by a wall switch
Telephone
line
ページ2に含まれる内容の要旨
Headset charger installation Install the headset charger as shown below. Plug the large end of the Plug the small end of the headset charger power headset charger power adapter into an electrical adapter into the power jack outlet not controlled by a of the headset charger. wall switch. Headset charger Power on the headset Power on the headset before use. Place the headset in the headset charger or press and hold for two seconds. The light flashes three times in blue and you hear th
ページ3に含まれる内容の要旨
Handset overview CHarge light VOL/CID (volume/caller ID) On when the handset is charging. Review the call log when the telephone is / VOL not in use. (directory/volume) Scroll down while in a Review the directory menu. when the telephone is Decrease the listening not in use. volume during a call. Scroll up while in a MeNU/SeLeCT menu. Show the menu. Increase the listening volume during a call. Select an item or save a setting while in a (speakerphone) menu. Make, answer or join
ページ4に含まれる内容の要旨
Using the menu To enter the handset menu: > The symbol indicates the . Press MeNU/ SeLeCT when the handset is feature to select. not in use. >Ringers 2. Press / VOL or VOL/CID until the Settings > symbol displays next to the desired feature menu. 3. Press MeNU/SeLeCT to enter that menu. • To return to the previous menu, press OFF/CLear . • To return to idle mode, press and hold OFF/CLear . Telephone settings Default settings are indicated by an asterisk(*). Screen display Function Opt
ページ5に含まれる内容の要旨
Intercom Use the intercom feature for conversation between two system handsets, or a handset and a headset. • You can use a maximum of five handsets, or four handsets and a headset at the same time. Only two handsets, or one handset and one headset can be used on an intercom call. Only three handsets, or two handsets and one headset can be used on an outside call. • If there is an incoming call while the originating handset is making an intercom request, the intercom request will be stopp
ページ6に含まれる内容の要旨
Directory The directory can store up to 50 entries. To add a directory entry: . Press MeNU/ SeLeCT when the handset is not in use. 2. Scroll to select >Directory and then >add contact . 3. When the screen displays eNTer NUMBer : • Use the dialing keys to enter the number (up to 30 digits). -Or- • Copy a number from the redial list by pressing reDIaL/ PaUSe and then press / VOL, VOL/CID or reDIaL/ PaUSe repeatedly to choose a number. Press MeNU/SeLeCT to copy the number. 4. Press MeNU/SeL
ページ7に含まれる内容の要旨
To save a call log entry to the directory: . When the desired call log entry displays, press MeNU/SeLeCT . 2. When the screen displays eDIT NUMBer , use the dialing keys to modify if necessary. 3. Press MeNU/SeLeCT . 4. When the screen displays eDIT NaMe , use the dialing keys to modify if necessary. 5. Press MeNU/SeLeCT to confirm. To delete the call log entries: • Delete an entry: When the desired call log entry displays, press MUTe/reMOVe . • Delete all entries: Press MeNU/ SeLeCT when th
ページ8に含まれる内容の要旨
Play messages To play messages with the telephone base: Press /PLaY/ STOP when the telephone is not in use. Options during playback: • Press /VOL+ or /VOL- to adjust the speaker volume. • Press /SKIP to skip to the next message. • Press /rePeaT to repeat the message currently playing. Press /rePeaT twice to listen to the previous message. • Press X/DeLeTe to delete the current message. The system advances to the next message. • Press /PLaY/STOP to stop. To play messages with a handset: Pr
