ページ1に含まれる内容の要旨
All-in-One Headset
Operating Instructions
Model No. WX-H3050
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this Operating Instructions.
WX-H3050
FRANÇAIS ENGLISH
ページ2に含まれる内容の要旨
ENGLISH VERSION For U.S.A. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruct
ページ3に含まれる内容の要旨
Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. Disclaimer of Warranty IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRI- (4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, AL CO,. LTD. BE LIABLE TO ANY PARTY OR ANY PERSON, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM EXCEPT FOR R
ページ4に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the pola
ページ5に含まれる内容の要旨
CONTENTS Limitation of Liability ................................................................................................................................... 3 Disclaimer of Warranty ............................................................................................................................... 3 Important Safety Instructions ...................................................................................................................... 4 Preface .....................
ページ6に含まれる内容の要旨
Preface All-in-One Headset WX-H3050 is exclusively designed for Panasonic Wireless Communication System, which is used with drive- thru menu boards, etc. This headset is equipped with the microphone, earphone as well as battery compartment and control buttons. With the built-in antennas, transmitter, and receiver, users can communicate with other store personnel and customers. Features • This headset can be used with Center Module WX-C3010. • 1.9 GHz DECT* is used with headset to prevent the int
ページ7に含まれる内容の要旨
Major Operating Controls and Their Functions t !1 y !2 !3 !4 !5 u r q !6 !7 i e o w !0 7
ページ8に含まれる内容の要旨
q Head Band and Head Pad !3 External Device Control Button [C] Adjustable to your head by sliding the head pad. Press and hold the C button to turn on the external device. w Battery Lock [EJECT] !@ When removing the battery, slide out the lock. !4 Volume Control Buttons [VOL ] When loading a battery, insert the battery until the lock Pressing the buttons will increase or decrease the sound clicks. level. e Battery Case / Battery (Optional accessory) !5 Talk 1 Button [T1] Refer to p. 6 "Precautio
ページ9に含まれる内容の要旨
Battery Loading & Replacement Notes: Replacement • Refer to operating instructions included with the battery 1. Slide the battery lock to the outside. and battery charger. • Battery replacement is recommended when the power 2. Remove the battery. indicator lights up in red and a pulsing beep is heard in the headphone. 3. Proceed as described in "Loading" above. Installation 1. Insert the battery in the battery case as shown in the fig- ure. Battery Case w q Battery Battery Case When inserti
ページ10に含まれる内容の要旨
Operating Procedures 4. Adjust the head pad so that the earphone is placed on Preparations your ear. Prior to operating the headset, confirm that the system setup for the headset, center module, and other devices has been completed. 1. Install a battery in the battery compartment. Refer to p. 9 Battery Loading & Replacement. 5. Rotate and bend the microphone boom so that the w microphone is placed near your mouth. q e 2. Press the power button to turn on the headset. Power button 6. Attach a s
ページ11に含まれる内容の要旨
Communications with Communications with Other Customers [TALK] Store Personnel [PAGE] Any store personnel wearing the headset can communicate Store personnel wearing the headset can communicate with bidirectionally with any customer who is at the menu board. each other without being heard by customers. 1. Select a proper sound level by pressing the ! or @ but- ton. 1. Hold down the P button and speak into the microphone at a normal level. Hold
ページ12に含まれる内容の要旨
Control of the device control ter- 1. While a connection is maintained to Lane A, the lane minals indicator is lit in yellow. Press the T2 button if you want The device control terminals of the center module can be to make a connection changeover to Lane B. When con- controlled through the headset. nected to Lane B, a voice of [Lane B] is heard from the 1. Hold down the C button. A short beep is heard from the speaker of the headset and the lane indicator is lit
ページ13に含まれる内容の要旨
Manager Mode (Only one head- Canceling the Manager Mode set) 1. Turn off the power of All-in-One Headset that has been set for the manager mode. Complete ID Registration, to do this setting. The headset set to the Manager mode has following func- Power button tionality. • The manager can interrupt store personnel's TALK or PAGE at any time by monopolizing one channel by prior- ity. • The Manager hears audio from POS alone. 1. Hold down the power button for two seconds or more to turn off t
ページ14に含まれる内容の要旨
Auto-Talk-Lock setup (for only one headset) For a headset where Auto-Talk-Lock is set up, it has a func- tion to select [Talk] automatically when the vehicle detector has become active, and you can talk with the customer at the menu board. 1. Confirm that the DIP Switch 1 of the headset is ON, the DIP Switch 2 is set at the objective lane, and the power of the headset is OFF. Power button 2. Turn on the headset. The message "Hello Headset **" (** is the number of headset) is output from the
ページ15に含まれる内容の要旨
Maintenance The head-pad cushion and earphone-pad are replaceable. Replace when necessary. Head-pad cushion Earphone-pad 15
ページ16に含まれる内容の要旨
Setup Procedures Caution: Setup of this product should only be performed by DIP Switch Setup qualified service personnel or system installers. An eight-bit DIP switch is provided for system setups. The initial setting is marked with an asterisk *. Note: Be sure to turn off the headset in Step 1. Otherwise, Opening the Switch the DIP Switch will not be activated until you turn the Compartment power off and on again. 1. Press the power button for 2 seconds or more to turn off ON the headset. 2
ページ17に含まれる内容の要旨
SW#8: This switch selects RF Power. • If ID registration is performed for 2 or more headsets, ON: Reduce Power follow the steps 2-4 individually. OFF: Full power Deletion of ID ID Registration To delete the registered ID of All-in-One Headset, follow the 1. Press the ID Registration of the center module for 2 sec- steps below. onds or more. The system is changed to the ID Registration mode. 1. Hold down the POWER button for more than 2 seconds to turn off the power of All-in-On-Headset. 2.
ページ18に含まれる内容の要旨
Troubleshooting Reference Symptom Cause/solution pages The headset ID is not registered in the center module of the tar- get. The power indicator blinks red. 17 → Register ID in the center module of the target. The battery is almost exhausted. The power indicator lights red → Recharge the battery. and a constant beep is heard in – (Refer to the operating instructions of the battery charger.) the headphone. The battery is exhausted. The battery is not inserted correctly. Cannot turn on the hea
ページ19に含まれる内容の要旨
Specifications Operating Frequency: 1 920 - 1 930 MHz Required Power Supply: Rechargeable Li-ion Battery, 3.7 V DC Control Function: Power (On/Off) Volume (Up/Down) Talk (T1/T2) Page Lane Selection (A/B) External Device Control (C) DIP Switch Setup (8 bit) Dimensions: 157 mm(W) x 269 mm(H) x 82 mm (D) {6-3/16" (W) x 10-5/8" (H) x 3-1/4" (D)} Weight (excluding battery): 150 g {0.33 lbs} Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Dimensions and weights indicated are approxim
ページ20に含まれる内容の要旨
Standard Accessories Operating Instructions (this manual) ................................ 1 pc. Head protector ................................................................. 2 pcs. Optional Accessories Battery (Li-ion 3.7 V DC, 1 100 mAh) ............................... WX-B3030 Battery Charger ................................................................ WX-Z3040 20
