Shure 515SBGXの取扱説明書

ページ1に含まれる内容の要旨

Model 515SBGX, 515SBG-18X and
515SBG-18XF User Guide
VARIATIONS
MODEL 515SBGX: Does not include gooseneck or mounting
flange
MODEL 515SBG-18X: Includes gooseneck and 76.2 mm (3 in.)
diameter mounting flange
MODEL 515SBG-18XF: Includes gooseneck and 44.4 mm
(1-3/4 in.) diameter mounting flange
SPECIFICATIONS
515SBGX
Type
Dynamic (moving coil)
Frequency Response
80 to 15,000 Hz (see Figure 1)
515SBG-18X
+20
+10 1 cm
(3/8 in.)
0
.06 cm
–10
(2 ft.)
-20
29 3 4 5 6 789 2 3 4 5 6 78
GENERAL
20 50 100

ページ2に含まれる内容の要旨

Switch The GREEN and WHITE cable leads are used to control an exter- Built-in, leaf-type, non-locking, push-to-talk nal relay or control circuit. Refer to the following table and to the Shock Mount wiring diagram in Figure 4. Internal rubber vibration isolator Cable WIRE FUNCTION XLR 1/4 IN. COLOR CONNECTOR PHONE Highly durable cable with effective hum shielding, four conduc- PLUG INPUT TYPE tors (two shielded), plastic jacketed RED AUDIO PIN 2 TIP Model 515SBGX: 1.8 m (70 in.) Models 515SB