ページ1に含まれる内容の要旨
RS 4200
Instructions for use
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
A
ページ4に含まれる内容の要旨
B
ページ5に含まれる内容の要旨
C A B C
ページ6に含まれる内容の要旨
Contents Safety instructions ........................................................................... 2 The RS 4200 stethoset receiver system .......................................... 3 Delivery includes .............................................................................. 4 RS 4200-2 product variant ................................................................... 4 Operating controls ............................................................................ 5 Receiver (see ins
ページ7に含まれる内容の要旨
Safety instructions Please read these instructions carefully and completely before using the system. Make these instructions easily accessible to all users at all times. Always include these instructions when passing the system on to third parties. Do not wear the headphones in situations which require special attention (e.g. when performing skilled jobs). Always keep the system dry and do not expose it to extreme temperatures (ideally 10-35°C). Use the system with care and set it up in a
ページ8に含まれる内容の要旨
The RS 4200 stethoset receiver system The RS 4200 is a wireless radio frequency stethoset receiver system with which you can adjust the volume of your TV, radio, personal stereo and other hi-fi equipment to suit your individual needs. The transmitter has a range of up to 100 m (depending on outer conditions) which allows you to move around freely – without the constrictions of cables. The RS 4200 is particularly easy and intuitive to operate. The stethoset receiver automatically switches on when
ページ9に含まれる内容の要旨
Delivery includes Delivery of the RS 4200 stethoset receiver system includes: 1 RR 4200 stethoset receiver 1 TR 4200 transmitter with integrated charging compartment 1 BA 300 Lithium-Ion rechargeable battery 1 mains unit 1 connecting cable fitted with two 3.5 mm stereo jack plugs for connection to headphone socket (with one adapter to 1/4“ (6.3 mm) jack socket) 1 adapter RCA/jack socket for connection to RCA sockets (e.g. TB/Aux-Out) 2 pairs of replacement ear cushions Instructions for u
ページ10に含まれる内容の要旨
Operating controls A Receiver (see inside cover) Volume control Compartment for BA 300 rechargeable battery Balance control TUNE button B Transmitter (see inside cover) 3.5 mm stereo jack socket labeled AUDIO (marked blue) for connection of sound source Channel selector switch CHANNEL DC socket labeled 9 V (marked yellow) for connection of mains unit “Speech intelligibility” button Antenna Charging compartment for receiver Charging compartment for spare rechargeable ba
ページ11に含まれる内容の要旨
Putting the system into operation Setting up the transmitter Choose a suitable place near your sound source (e.g. TV). Note: Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc. as this can decrease the transmitter’s range. It is not necessary that the transmitter and stethoset receiver are in a direct line of sight, so you can move around freely in the home or outside in the garden. One transmitter can be used to transmit to several recei
ページ12に含まれる内容の要旨
Connecting the transmitter via the headphone socket A Plug in the other end of the connecting cable to the headphone socket on your sound source. Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of wireless sound transmission. If necessary, check the menu setting of your TV. Note: With most TVs, the headphone socket is located at the front or sides. Depending on the socket, you may have to use the adapter . In order to prevent
ページ13に含まれる内容の要旨
Connecting the transmitter via the SCART socket C If your sound source has a SCART socket, you can order the suitable SCART adapter (see “Accessories” on page 16) from your Sennheiser dealer. Connect the connecting cable to the SCART adapter . Plug in the SCART adapter to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). Using an external microphone D If your sound source do
ページ14に含まれる内容の要旨
Inserting and removing the receiver’s rechargeable battery Insert the battery into the compartment as shown on the left. Make sure that the battery is inserted correctly. To remove the battery, use the finger catch projection to pull the battery out of the receiver. Note: The receiver is delivered with the battery inserted. Before you use the rechargeable battery for the first time, charge it until the LED
lights up green (see “Storing and charging the receiver” on page12). This can
ページ15に含まれる内容の要旨
ON OFF Using the system components Switching the transmitter on The transmitter automatically switches on when a sufficient audio signal is present at the headphone socket of your sound source. Switch your sound source on. This automatically switches on the transmitter and the LED lights up green. If the transmitter does not switch on, increase the volume of your sound source. Note: If there is no sufficient audio signal for at least 3 minutes, the transmitter automatically switches off. S
ページ16に含まれる内容の要旨
Adjusting the volume If the transmitter is connected to a headphones socket of your sound source: Adjust the volume of the sound source to a medium level. This improves the quality of wireless sound transmission. Use the volume control to adjust the volume to a sufficient and comfortable level. Automatic transmitter search tuning Put the receiver on. The receiver starts searching for a transmitter signal and automatically tunes itself to the last selected channel. If a transmitter sig
ページ17に含まれる内容の要旨
Adjusting the balance The RS 4200 features a balance control for right/left volume adjustment. Use the balance control to adjust the volume so that you hear equally well with both ears. Enhancing speech intelligibility The button allows you to enhance speech intelligibility. If the speech is barely intelligible, press the button . The button is backlit in yellow and speech intelligibility is enhanced. Note: If the speech remains barely intelligible, increase the volume of your soun
ページ18に含まれる内容の要旨
Meaning of the LEDs and acoustic signals LEDs on the transmitter LED Status Meaning Operation indication lit green Transmitter is switched on off Transmitter is switched off Charging control LED of receiver lit red Spare rechargeable rechargeable battery
battery or rechargeable battery is being charged Charging control LED of spare rechargeable battery lit green Rechargeable battery is fully charged Speech intelligibility” button lit yellow Speech enhancement is activated Acoustic s
ページ19に含まれる内容の要旨
Care and maintenance Cleaning the system Attention! Liquids can damage the electronics of the units! Liquids entering the housing of the units can cause a short-circuit and damage the electronics. Keep all liquids far away from the units. Before cleaning, disconnect the transmitter from the mains. Only use a slightly damp cloth to clean the units. Do not use any cleansing agents or solvents. Cleaning the ear cushions Carefully remove the ear cushions from the receiver. Clean the
ページ20に含まれる内容の要旨
If problems occur... Check if the problem you face is listed in the table below: Problem Possible cause Page You cannot Are all jack plugs connected correctly? 6 ff hear anything Is the transmitter connected to the 6 ff sound source? Is the transmitter connected to the 8 mains? Is the volume of the sound source 6 sufficient? Is the green operation indication lit? 8 Is the volume of the receiver 11 sufficient? Is the rechargeable battery fully 9 charged and inserted properly into the re
