ページ1に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 1 Monday, March 14, 2011 3:45 PM
4-Port WirelessHD Kit
RF-WHD200
User Guide
ページ2に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 2 Monday, March 14, 2011 3:45 PM Rocketfish RF-WHD200 4-Port WirelessHD Kit Contents Safety information .......................................................... 3 Features............................................................................... 4 Setting up the HDWireless Kit..................................... 9 Using the WirelessHD Kit ............................................13 Specifications..................................................
ページ3に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 3 Monday, March 14, 2011 3:45 PM Safety information The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic
ページ4に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 4 Monday, March 14, 2011 3:45 PM • Only use attachments or accessories specified by the manufacturer. • Unplug the included devices during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when a component of the kit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
ページ5に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 5 Monday, March 14, 2011 3:45 PM Transmitter front/top panel Item Description 1 HDMI 4—When the indicator is on this HDMI port is in use. 2 HDMI 3—When the indicator is on this HDMI port is in use. 3 HDMI 2—When the indicator is on this HDMI port is in use. 4 HDMI 1—When the indicator is on this HDMI port is in use. 5 Power and link status indicator ( ) • Blinking—The power is on and the receiver is searching for the transmitter or is in sleep mode. • On—
ページ6に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 6 Monday, March 14, 2011 3:45 PM Receiver front/top panel 1 Item Description 1 Power and link status indicator ( ) • Blinking—The power is on and the receiver is searching for the transmitter or is in sleep mode. • On—The transmitter and receiver are linked. •Off—The power is off. Transmitter back panel Item Description 1 DC IN jack—Connect the power adapter labeled “transmitter” to this jack. 2 Power switch—Turns the transmitter on or off. 3 HDMI/WVAN swi
ページ7に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 7 Monday, March 14, 2011 3:45 PM Receiver back and side panels Right side view Back view Left side view Item Description 1 HDMI jack—Connect this port to an HDMI input on the TV or projector, using a high-speed HDMI cable. 2 DC IN jack—Connect the power adapter labeled “Receiver” to this jack. 3 Power switch—Turns the receiver on or off. 4 Cable routing clips - Insert HDMI cable into these clips for receiver placement stability. RF-WHD200 7
ページ8に含まれる内容の要旨
SLEEP HDMI 1 HDMI 2 HDMI 3 HDMI 4 Wireless HD Transceiver RF-WHD200_10-1353_MAN_ENG_V3.fm Page 8 Monday, March 14, 2011 3:45 PM Remote control Note: Remote control design subject to change. Item Description 1 SLEEP button -Press to put the WirelessHD receiver and transmitter into sleep mode; or to "wake" them up from sleep mode if they do not automatically do so on their own (this functionality varies by brand and model of connected components). Be sure to point the remote toward each one s
ページ9に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 9 Monday, March 14, 2011 3:45 PM Setting up the HDWireless Kit Setup tips: - Test the placement of the transmitter and receiver for a good signal prior to permanently mounting or installing everything. - For best performance and range, mount the receiver vertically on the wall next to the TV (NOT behind the TV) or upside-down on the ceiling next to the projector, ensuring that the Rocketfish and WiHD logos can be seen from the position in the room wher
ページ10に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 10 Monday, March 14, 2011 3:45 PM Connecting the WirelessHD transmitter and receiver To connect the WirelessHD transmitter and receiver: 1 Connect up to 4 HDMI enabled source components, such as a Blu-ray/DVD player, cable/satellite box, gaming console, laptop, etc., to the HDMI input jacks on the transmitter, using high-speed HDMI cables. Transmitter Game console HDMI cable Cable/Satellite box 10
ページ11に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 11 Monday, March 14, 2011 3:45 PM 2 Connect the display device, such as a TV or projector, to the receiver with a high-speed HDMI cable. Receiver HDMI cable Display devices OR 3 Connect the AC power adapters to the transmitter and receiver and to power outlets. Note: The included AC adapters are labeled “Receiver” and “Transmitter,” to ensure that the correct adapter is used for each device. 4 Power on your TV or projector and switch to the HDMI input t
ページ12に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 12 Monday, March 14, 2011 3:45 PM 6 Power on the WirelessHD transmitter and receiver. The HDMI input port LED on the transmitter should light continously (stop blinking) to indicate that the desired input is selected with active video. If this selection does not occur automatically, please use the included remote control or HDMI Select Switch on back of the transmitter to select the desired input port. See step 5 in “Using the WirelessHD Kit” section
ページ13に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 13 Monday, March 14, 2011 3:45 PM 2 Using appropriate wall anchors and screws (not included) for the type of wall or ceiling where the receiver will be mounted, securely attach the receiver mounting bracket to the wall. 3 Mount the receiver onto the mounting bracket by sliding the slots on the bottom of the receiver downward onto the tabs on the bracket. Mounting slots Mounting bracket Using the WirelessHD Kit Upon completion of the setup process and su
ページ14に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 14 Monday, March 14, 2011 3:45 PM 3 Power on the source component you wish to view. 4 Power on the WirelessHD transmitter. 5 Switching the WirelessHD transmitter to the correct HDMI input: Note: When switching between the four HDMI ports, it is normal for the switching to take an average of about 10 seconds (sometimes up to 20 seconds; the further the WirelessHD transmitter and receiver are from each other, the longer the switching will take). The Wirel
ページ15に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 15 Monday, March 14, 2011 3:45 PM 6 To turn the WirelessHD kit off, perform one of the following steps: • Power off your TV or projector and source devices - when the WirelessHD transmitter and receiver have not detected a signal, they will automatically go into sleep mode. Note: When the WirelessHD transmitter and receiver go into sleep mode, the power and link status LEDs on both units will blink slowly. Also note: Some HDMI source devices like TiVo
ページ16に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 16 Monday, March 14, 2011 3:45 PM Similarly, when an HDMI-CEC enabled source device (such as a Blu-ray player) is connected to the WirelessHD transmitter and the WirelessHD receiver is connected to an HDMI-CEC enabled TV, pressing the Play button on the Blu-ray player's remote does the following: • Turns on the Blu-ray player • Establishes a WirelessHD connection from the Transmitter to the Receiver •Turns on the TV • Switches the TV to the proper HDM
ページ17に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 17 Monday, March 14, 2011 3:45 PM Troubleshooting Symptom Possible Solutions Receiver will • For best performance, mount the receiver on the wall next to the TV (or on the ceiling next to a projector) not link to with a clear view of the room. It should NOT be mounted behind the TV or projector. Try positioning the Transmitter receiver above, below or next to the TV/projector and check for best signal quality before securing the mounting bracket to the
ページ18に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 18 Monday, March 14, 2011 3:45 PM Symptom Possible Solutions No video • If the power LEDs on the transmitter and receiver are blinking, the adapters are not linked. See “Receiver and/or audio will not link to Transmitter” troubleshooting steps above. • If the power LED on the transmitter and receiver are solid (not blinking), the adapters are linked such that video and audio sent into the transmitter should be output from the receiver. Therefore, the TV
ページ19に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 19 Monday, March 14, 2011 3:45 PM Specifications WirelessHD, HDMI (V1.4a 3D) Standards 60 GHz Frequency HDMI Input/Output interface 32-antenna array (integrated ceramic) Antenna type 32.8 ft. (10 m) Range Transmitter: 4 ports (CEC pass-through) AV port Receiver: 1 port (CEC pass-through) Transmitter: 7.39 x 6.18 x 2.17 in. (187.6 x 157.0 x 55.2 mm) Dimensions Receiver: 6.06 x 4.72 x 1.89 in. (154.0 x 120.0 x 48.0 mm) Transmitter: 12.87 oz. (365 g) Weight R
ページ20に含まれる内容の要旨
RF-WHD200_10-1353_MAN_ENG_V3.fm Page 20 Monday, March 14, 2011 3:45 PM Video Vertical Color Sampling Bits/pixel format refresh space 50 Hz YCbCr 4:2:2 24/30 bits 4:4:4 24/30 bits RGB 4:4:4 24/30 bits 720p 59.94/60 Hz YCbCr 4:2:2 24/30 bits 4:4:4 24/30 bits RGB 4:4:4 24/30 bits 50 Hz YCbCr 4:2:2 24/30 bits 4:4:4 24/30 bits RGB 4:4:4 24/30 bits 1080i 59.94/60 Hz YCbCr 4:2:2 24/30 bits 4:4:4 24/30 bits RGB 4:4:4 24/30 bits 23.976/24 Hz YCbCr 4:2:2 24/30 bits 4:4:4 24/30 bits RGB 4:4:4 24/30 bit
