ページ1に含まれる内容の要旨
BTH-808 WIRELESS BLUETOOTH HEADSET
USER’S MANUAL
1. INTRODUCTION
The headset BTH-808 is the ultimate hands-free and wire-free solution that connects your mobile phones to your
headset via Bluetooth radio technology instead of a typical hard-wire connection. Conversations can now be
transmitted wirelessly to and from your earpiece with this small and lightweight Bluetooth earpiece. You also
have easy access to volume controls and other popular features such as Mute and
ページ2に含まれる内容の要旨
2. INTRODUCTION 2.1 HEADSET APPEARANCE Figure 1 Figure 2 www.rayming.com BTH808_Users Guide_121504.doc
ページ3に含まれる内容の要旨
NOTE: Carefully remove the clear protective plastic band around the headset speaker and replace it with included foam cover. Your BTH-808 should look like the one shown in Fig 6 when complete. Figure 3 Figure 4 1 Volume Control (up) -Adjusts speaker(receive) volume up 2 Volume Control (down) -Adjusts speaker(receive) volume down 3 Multifunction button.-Controls several headset functions. 4 Microphone -Picks up your voice input. 5 Speaker -Plays the sound
ページ4に含まれる内容の要旨
2.2 HOW TO USE BTH-808 WITHOUT EAR HOOK Figure 5 Figure 6 www.rayming.com BTH808_Users Guide_121504.doc
ページ5に含まれる内容の要旨
2.3 HOW TO USE BTH-808 WITH EAR HOOK Figure 7 Figure 8 You need to adjust the ear hook for left-ear or right-ear use. The figure 7 is for left-ear use and the figure 8 is for right-ear use. www.rayming.com BTH808_Users Guide_121504.doc
ページ6に含まれる内容の要旨
2.4 WHEN TO CHARGE GETTING STARTED Before you can use your headset, you need to charge its self-contained battery for a minimum of two hours. RECHARGING When the red indicator light on the headset flashes and you hear high tones through the headset speaker, the headset battery needs to be recharged. BATTERY USEAGE A fully charged headset battery provides approximately: Talk time – 4.5 hours Standby time – up to 200 hours 2.5 PAIRING THE HEADSET WITH A PHONE You must
ページ7に含まれる内容の要旨
To make a call using voice dialing 1. Make sure the phone and the headset are on and within range of each other and then press the multifunction button. 2. It may take a second to establish the wireless connection between the phone and the headset. During this time, you might hear a repeated tone in the headset, but after the beep, you can begin to dial as you normally would. 3. End the call by pressing the multifunction button. To answer a call using the multifunction button 1
ページ8に含まれる内容の要旨
3. TROUBLESHOOTING 3.1 No audio between headset and phone a.) The headset and the phone you are using must be paired to recognize each other before you can use the BTH-808. Follow the instruction for paring Bluetooth devices as stated in your phone’s User Guide. b.) The BTH-808 needs to be charged for 2 hours before initial use. c.) Both the BTH-808 and your phone need to be within range of each other typically within 30’. 3.2 The indicator light flashes red a.) This ind
ページ9に含まれる内容の要旨
LIMITED WARRANTY Rayming Corporation warrants this product hardware against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from an authorized dealer. Except as provided herein, Rayming Corporation makes no express warranties’, including but not limited to any warranties of merchantability or fitness for particular use, or non-infringement. You acknowledge that your use of the product or service is at your sole risk and
