Dynabrade DYNABUFFER 57126の取扱説明書

ページ1に含まれる内容の要旨

Parts Page Reorder No. PD03•10
For Serial No. 03A1145 and Higher
Effective February, 2003
Supercedes PD02•47
3" Dynabuffer
Models:
57126 - 3" Dynabuffer Air Motor and Machine Parts
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools
(ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s
!
WARNING
Warning/Safety Operating Instructions for more complete safety information.
28 29 30
Index Key
No. Part #

ページ2に含まれる内容の要旨

Important Operating, Maintenance and Safety Instructions ® Carefully read all instructions before operating or servicing any Dynabrade Abrasive Power Tool. Warning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration. Important: All Dynabrade Rotary Vane air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties. Operating Instructions: Warning: Eye, face, sound, respiratory, and body protection must be worn while operating

ページ3に含まれる内容の要旨

Motor Assembly/Disassembly Instructions – 3" Dynabuffer Important: Manufacturer’s warranty is void if tool is disassembled before warranty expires. Notice: All of the special repair tools referred to in these instructions can be ordered from Dynabrade. The 96525 Tool Repair Kit is available and the items contained in this kit are shown on the back of this parts page. Please refer to this parts page for proper part identification. Motor Disassembly: 1. Disconnect the tool from the air supply.

ページ4に含まれる内容の要旨

Motor Assembly/Disassembly Instructions – 3" Dynabuffer (continued) 8. Use the larger end of the 57091 Bearing Press Tool to press the 57088 Bearing down to the top of the counter weight of the 57422 Motor Shaft Balancer. Also install the 51366 Bearing Plate in the same manner. 9. Install the 56047 Key into the 57422 Motor Shaft Balancer. 10. Install the 57113 Rotor/Blade Set (5/pkg.). Apply the 95842 Dynabrade Air Lube (10W/NR or equivalent) to the vanes. 11. Position the 58358 Cylinder Assem