ページ1に含まれる内容の要旨
User’s manual
TL7610/TL7611
DECT 6.0 cordless headset
ページ2に含まれる内容の要旨
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 49-52 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: TL7610 (Headset and headset base)
ページ3に含まれる内容の要旨
Parts checklist - TL7610 Check to make sure the headset package includes the following items: Quick start guide User’s manual TL7610/TL7611 TL7610/TL7611 DECT 6.0 cordless headset DECT 6.0 cordless headset User's manual Quick start guide Cordless headset Over-the-ear hook Headset base Battery compartment Battery for Telephone line cords cover headset (4-conductor and 2-conductor) Headset base Line splitter Color label Behind-the-neckband Over-the-headband power adapter (lig
ページ4に含まれる内容の要旨
Parts checklist - TL7611 Check to make sure the headset package includes the following items: User’s manual User’s manual Quick start guide TL7610/TL7611 TL7000 TL7610/TL7611 DECT 6.0 cordless headset DECT 6.0 cordless headset Handset lifter for use with AT&T models TL7610/TL7650 TL7610/7611 TL7000 User's TL7610/7611 Over-the-ear hook Cordless User's manual manual Quick start guide headset Battery compartment Battery for Telephone line cords Headset base cover headse
ページ5に含まれる内容の要旨
User’s manual TL7610/TL7611 DECT 6.0 cordless headset Table of contents Getting started No lifter or lifter Quick reference guide mode .....................................11 headset ........................................1 Battery installation ..................12 headset base ............................2 Battery charging .......................13 Installation preparation ............4 Headset attachments Headset base installation Over-the-ear hook ..............
ページ6に含まれる内容の要旨
Table of contents Switching a call between Maintenance and handset and headset ......27 Troubleshooting Multiple headset/handset Troubleshooting ........................37 use ...........................................28 Important safety Mute ...........................................28 information .............................49 Alert tones ...................................29 Maintenance................................53 Indicator lights .....
ページ7に含まれる内容の要旨
Getting started Quick reference guide - headset ON/OFF Press to make and/or answer a call, and to end a call. The light is on when the headset is charging in the headset base. The light flashes slowly when you are on a call, or flashes quickly when there is an incoming call (page 30). VOLUME + – Press the volume key on the side of the headset to adjust the listening volume when on a call. MUTE/FLASH Press to mute the microphone during a call (page 28). Press and hold to receive call
ページ8に含まれる内容の要旨
Getting started Quick reference guide - headset base Charging cradle Insert the headset here for charging. PAIR Press to register or de-register a headset. NO LIFTER MODE light On when NO LIFTER MODE is selected. Flashes while on a call, or another telephone is in use on the same line. Flashes quickly when there is an incoming call. LIFTER MODE light On when the LIFTER MODE is selected. Flashes while on a call. Flashes quickly when there is an incoming call. MUTE light On when the call is
ページ9に含まれる内容の要旨
Getting started Quick reference guide - headset base LIFTER AUDIO ADJUST Adjust the switch to choose the best headset audio quality when using a handset lifter. (See the handset lifter user's manual for more information. You may download the manual at www.telephones.att.com.) VOLUME Press the volume keys on the side of the headset base to adjust the speaking volume when on a call. MODE Press to choose between the NO LIFTER MODE or LIFTER MODE when the headset is not in use
ページ10に含まれる内容の要旨
Getting started Installation preparation You must install and See pages 12-13 charge the battery before for instructions. STOP! using the headset. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about D
ページ11に含まれる内容の要旨
Getting started Headset base installation Optional accessories The following optional accessories are compatible with your headset and base: • The TL7000 is a handset lifter with ring detector. • The TL7600 is an expansion headset (up to two headsets can be used with the same headset base). • The TL7601 is a dial pad that allows you to dial numbers and place calls when away from your telephone. The dial pad also allows you to use the headset as a stand-alone product without a connection to
ページ12に含まれる内容の要旨
Getting started Headset base installation Installation options IMPORTANT: If you purchased model TL7611, or if you purchased a model TL7000 handset lifter (purchased separately), follow the installation instructions in the TL7000 handset lifter manual and then skip to page 12 of this manual. If you purchased model TL7610 (without handset lifter), you have three installation options: Option 1: Use the headset with a single standard telephone line with a corded or cordless telephone. Option
ページ13に含まれる内容の要旨
Getting started Headset base installation Installation preparation Before installing the headset base: Remove the rear bottom piece of the headset base by pushing it away from the base (as shown in Figure 1). Figure 1 Install the headset base as shown on the following pages. After completing installation option 1, 2 or 3: Slide the rear bottom piece towards the headset base until it clicks into place (as shown in Figure 2). Figure 2 7
ページ14に含まれる内容の要旨
Getting started Headset base installation Option 1: Headset base with corded or cordless phone installation (TL7610) 1. Plug the small end 2. Plug one end of the of the headset telephone line cord into base power the TEL WALL JACK (red adapter into the dot) at the back of the POWER jack headset base. (green dot) at the back of the 3. Plug the other end of headset base. the telephone line cord into the line splitter. Telephone line cord 4. Plug the line splitter
ページ15に含まれる内容の要旨
Getting started Headset base installation Option 2: Headset base stand-alone installation (TL7610) In order to make calls, you need a telephone plugged into the same telephone line or a dial pad (TL7601 sold separately). 1. Plug the small end of 2. Plug one end of the the headset base power telephone line cord into adapter into the POWER the TEL WALL JACK (red jack (green dot) at the dot) at the back of the back of the headset base. headset base. Telephone line cord 3. Plug the other en
ページ16に含まれる内容の要旨
Getting started Headset base installation Option 3: Headset base with corded phone for multiple line system or digital business system installation (TL7610) With this installation, you can make and receive calls using the LIFTER MODE without a lifter. 1. Plug the small end of 3. Unplug the curly the headset base power handset cord from adapter into the POWER the telephone. Plug jack (green dot) at the the end of the curly back of the headset handset cord into the base. CU
ページ17に含まれる内容の要旨
Getting started Headset base installation No lifter mode or lifter mode There are two answer modes available on the headset base. The current mode is indicated by two lights on the front of the headset base named NO LIFTER MODE and LIFTER MODE. • When plugging your headset base into the telephone wall jack (installation option 1 or 2), make sure the headset base mode is set to NO MODE LIFTER MODE. -OR- • When connecting your headset base to a multiple line corded telephone (installation
ページ18に含まれる内容の要旨
Getting started Battery installation Install the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least six hours before use. When the headset is not in use, recharge the headset by returning it to the headset base. 1 1. If the battery door is attached, press on both sided of the battery compartment cover and lift the cover up and off. 2. Insert the battery into the battery c
ページ19に含まれる内容の要旨
Getting started Battery charging After installing the battery, charge the headset by placing it in the headset base as shown below. The headset ON/OFF light is on when the headset is charging. Push ON/OFF light Insert 1. Insert the headset into the 2. Push the headset downward headset base. until the ON/OFF light on the headset turns on. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT191545). To obtain a replacement battery, visit our websi
ページ20に含まれる内容の要旨
Getting started Headset attachments Over-the-ear hook To attach the ear hook to the headset: 1. Remove any headset attachment connected to the headset. 2. Insert the earpiece into the ear hook as shown in Figure 1. 3. Press the ear hook onto the earpiece as shown in Figure 2. 4. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth as shown in Figure 3. Figure 1 Figure 2 Figure 3 14
