ページ1に含まれる内容の要旨
2-696-114-11(1)
Wireless Stereo
Headset
Operating Instructions
DR-BT30Q
©2006 Sony Corporation
ページ2に含まれる内容の要旨
WARNING To reduce the risk of fire or electric The Bluetooth word mark and logos are shock, do not expose this owned by the Bluetooth SIG, Inc. and any apparatus to rain or moisture. use of such marks by Sony Corporation is under license. To reduce the risk of electrical Other trademarks and trade names are shock, do not open the cabinet. those of their respective owners. Refer servicing to qualified personnel only. Disposal of Old Electrical & Do not install the appliance in a Electronic confin
ページ3に含まれる内容の要旨
Table Of Contents Welcome! .......................... 4 3 steps to BLUETOOTH function ................................. 5 Location and Function of Parts............................... 6 Charging the unit ............. 7 Pairing ............................... 9 What is pairing? ........................ 9 Procedures of pairing ................ 9 Wearing the headset ...... 11 Indications of BLUETOOTH function 12 Listening to music ......... 13 Controlling the audio device – AVRCP .................
ページ4に含まれる内容の要旨
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses ™ BLUETOOTH wireless technology. • You can enjoy music from your BLUETOOTH device capable of transmitting music. • You can enjoy hands-free talking with your BLUETOOTH mobile phone inside your bag. • You can remotely control the basic functions of BLUETOOTH audio device (Play, Pause, Stop, etc.). • You can charge the unit using the supplied AC power adaptor. • By simply pressing the button, the cord of the unit i
ページ5に含まれる内容の要旨
3 steps to BLUETOOTH function Pairing First, register (“pair”) a BLUETOOTH device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. BLUETOOTH Wireless Stereo mobile phone, Headset etc. Pairing c Page 9 Listening to music Calling V V BLUETOOTH connection BLUETOOTH connection Operate the BLUETOOTH When the unit is turned on, the device to make the unit starts making the BLUETOOTH connection. BLUETOOTH connection to the recognized m
ページ6に含まれる内容の要旨
GETTING STARTED Location and Function of Parts 1 Jog switch 6 Indicator (red) Controls various functions Indicates the power status of when listening to music. the unit. 2 VOLUME – button 7 Microphone 3 VOLUME + button 8 RESET button 4 Indicator (blue) 9 DC IN 3 V jack Indicates the communication q; POWER button status of the unit. qa AUTO WIND button 5 Multi function button Retracts the cord of the unit. Controls various call functions. 6
ページ7に含まれる内容の要旨
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied 2 Make sure that indicator AC power adaptor to the (red) lights up while DC IN 3 V jack on the charging. unit. Wireless Stereo To an AC Headset outlet AC power Charging is completed in about To DC IN adaptor 3 hours* and the indicator (red) 3 V jack (supplied) goes off automatically. * Time required for empty battery to When the AC power adaptor
ページ8に含まれる内容の要旨
Notes Checking the remaining • If the battery is not used for a long time, battery battery may be quickly depleted, When pressing the POWER button however, after a few recharges, battery while the unit is turned on, the life will improve. indicator (red) flashes. You can • If the life of the built-in rechargeable check the remaining battery by the battery drops to half the normal length, number of times the indicator (red) the battery should be replaced. Consult flashes. your nearest Sony dealer
ページ9に含まれる内容の要旨
Pairing What is pairing? Procedures of pairing BLUETOOTH devices need to be 1 Place the connecting “paired” with each other beforehand. Once BLUETOOTH devices are device within 1 m (3 ft) paired, there is no need for pairing of this unit. again, except in the following cases: • Pairing information is deleted 2 Press and hold the after repair, etc. POWER button for • This unit is paired with 9 or more 7 seconds or more to devices. This unit can be paired with up to standby for pairing 8 devices;
ページ10に含まれる内容の要旨
3 Perform pairing When pairing with a procedure on the BLUETOOTH device that connecting device to cannot display a list of detect this unit. detected devices or that The list of detected devices has no display appears on the display of the You may pair the device by setting connecting device. This unit is both this unit and the connecting displayed as “DR-BT30Q.” device to pairing mode. For details, If “DR-BT30Q” is not refer to the operating instructions displayed, repeat from step 1. supplied
ページ11に含まれる内容の要旨
Wearing the headset 1 Pull out the cord. Retracting the cord Remove the housings from your ears, hold the cord, and press the AUTO WIND button to retract the cord as shown by the arrow in the illustration closing the headset upper sections. End mark Note Do not pull out the cord forcibly beyond the end mark. AUTO WIND button 2 Hook the upper section around the top of your Note If the cord is stopped midway, pull out the left ear and ensure that cord about 50 cm (1.6 ft) and press the it is seate
ページ12に含まれる内容の要旨
Indications of BLUETOOTH function B : Indicator (blue) R : Indicator (red) Status Flashing patterns ... Searching – – – – – – – – B ... – – – – – – – – R ... Connectable B – – – – – – – – – – – R ... Connecting – – – – – – – – – – B ... – – – – – – – – – – R ... HFP/HSP or A2DP – – – – – – – – – – – – – – B (with no voice or music) – R ... HFP/HSP and A2DPB – – – – – – – – – – – – (with no voice or music) – R ... Listening
ページ13に含まれる内容の要旨
OPERATING THE UNIT Listening to music 2 Make the BLUETOOTH VOLUME – button connection (A2DP) from VOLUME + button a BLUETOOTH device to this unit. Multi function Refer to the operating button (MFB) instructions supplied with the BLUETOOTH device on how to POWER button operate it. > 3 Start playback on the Nx BLUETOOTH device. . Tip BLUETOOTH connection of A2DP (Advanced Audio Distribution Profile) Check the following before can also be operated with the jog switch operating the unit. from this u
ページ14に含まれる内容の要旨
To adjust the volume Controlling the audio Press the VOLUME + or – button while listening to the music. device – AVRCP Tips If the BLUETOOTH audio device • When the volume level is low, raise the connected with this unit supports volume of the connected device. The AVRCP (Audio Video Remote sound will be clearer. Control Profile), you can control by • Volume level for calling and listening using the unit buttons. to music can be set independently. Refer to the operating instructions supplied wit
ページ15に含まれる内容の要旨
1 * It is available when connecting the BLUETOOTH mobile phone to this unit with the BLUETOOTH connection of HFP (Hands-free Profile) or HSP (Headset Profile). For details on profiles, see page 23. 2 * You may need to press the button twice depending on the BLUETOOTH device. 3 * Some BLUETOOTH devices may not operate. Note You cannot adjust the volume of the BLUETOOTH device by the unit volume buttons. 15
ページ16に含まれる内容の要旨
Calling VOLUME – button When this unit does not VOLUME + button connect to a BLUETOOTH mobile phone automatically Multi function 1 Make the BLUETOOTH button connection (HFP or POWER button HSP) from the BLUETOOTH mobile Check the following before operating the unit. phone to this unit. – The BLUETOOTH function is Refer to the manual supplied active on the mobile phone. with your BLUETOOTH mobile – Pairing of this unit and the phone for operation details. BLUETOOTH mobile phone is The list of rec
ページ17に含まれる内容の要旨
To call To adjust the volume Press the VOLUME + or – button. 1 Use the buttons on your Tips mobile phone when • You cannot adjust the volume when not making a call. communicating. If no sound is heard through this • Volume level for calling and listening unit, press the multi function to music can be set independently. button. To terminate a call Tip You can end a call by pressing the You can call in the following way, multi function button on the unit. depending on the BLUETOOTH mobile phone. R
ページ18に含まれる内容の要旨
1 * Some functions may not be supported Controlling the depending on the BLUETOOTH mobile phone. BLUETOOTH mobile 2 * This may vary, depending on the phone – HFP, HSP BLUETOOTH mobile phone. 3 * Some functions may not be supported when calling using the BLUETOOTH The operation of the buttons on this mobile phone. unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for BLUETOOTH mobile phone. Refer to the operating instructions supplied with your
ページ19に含まれる内容の要旨
Calling while playing back music If the BLUETOOTH connection is active with the mobile phone, you can switch the unit to call even when listening to music. Before starting, see “Calling” (page 16) on operating details. To call while playing back To receive a call while music playing back music The sound through the unit changes 1 Stop music playback, to a ring tone automatically. and then press and hold 1 Press the multi function the multi function button and talk. button for about After finishi
ページ20に含まれる内容の要旨
ADDITIONAL INFORMATION Disposing of the unit For environmental conservation, be sure to remove the built-in rechargeable batteries from the unit before disposing, and dispose of the batteries appropriately. 1 Remove the screw on 3 Unhook the claws on the right housing using both sides of the jog a cross-point switch to detach the screwdriver. board, and hold up the board by the jog switch. Note 2 Put your finger beside While holding up the board, be the POWER button, and careful not to break any
