ページ1に含まれる内容の要旨
4-130-037-11(1)
Wireless Stereo
Headset
Operating Instructions
DR-BT100CX
©2009 Sony Corporation
DR-BT100CX_4-130-037-11(1)
ページ2に含まれる内容の要旨
WARNING To reduce the risk of fire or electric Notice for customers: the following shock, do not expose this apparatus to information is only applicable to rain or moisture. equipment sold in countries applying EU directives To reduce the risk of electrical shock, do The manufacturer of this product is Sony not open the cabinet. Refer servicing to Corporation, 1-7-1 Konan, Minato-ku, Tokyo, qualified personnel only. Japan. The Authorized Representative for EMC and product safety is Sony
ページ3に含まれる内容の要旨
Disposal of Old Electrical & Disposal of waste batteries Electronic Equipment (applicable in the (Applicable in the European Union and other European Union and other European countries with European countries with separate collection separate collection systems) systems) This symbol on the battery or on the This symbol on the product or on its packaging indicates that the battery provided packaging indicates that this product shall with this product shall not be treated as not be treated
ページ4に含まれる内容の要旨
DR-BT100CX_4-130-037-11(1)
ページ5に含まれる内容の要旨
Table Of Contents What is Bluetooth wireless technology? ............................ 6 Welcome! ..................................... 7 3 steps to Bluetooth function .............. 8 Location and Function of Parts ......................................... 9 Charging the unit .....................10 Pairing .......................................1 What is pairing? .................................. 12 Procedures of pairing ......................... 12 Wearing the unit .......................
ページ6に含まれる内容の要旨
What is Bluetooth wireless technology? 2 – HSP (Headset Profile)* : Talking on the Bluetooth wireless technology is a ® phone/Operating the phone. short-range wireless technology that 2 – HFP (Hands-free Profile)* : Talking on enables wireless data communication the phone/Operating the phone by between digital devices, such as a hands-free. computer or digital camera. Bluetooth 1 * Enhanced Data Rate wireless technology operates within a 2 * When you use a Bluetooth mobile phone range
ページ7に含まれる内容の要旨
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. Enjoy music wirelessly from Bluetooth Stereo-enabled music players and
=> 1 mobile phones.* Embedded microphone enables hands-free conversation from Bluetooth-
=> 2 enabled mobile phone.* Enjoy basic remote control operation (play, stop, etc.) of music player functions
=> 3 via Bluetooth connection.* 4 Bluetooth version 2.1 + EDR* for higher quality audio with less interferen
ページ8に含まれる内容の要旨
steps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth Wireless Stereo mobile phone, Headset etc. Pairing Page 12–13 Listening to music Calling Bluetooth connection Bluetooth connection Operate the Bluetooth device to When the unit is turned on, the make the Bluetooth connection. unit starts making the Bluetooth connection to the r
ページ9に含まれる内容の要旨
GETTING STARTED Location and Function of Parts Headphones Microphone RESET button POWER button USB( ) jack Multi function button Controls various call functions. PAIRING button Clip Cord slider Indicator (blue) (red) Indicate the communication status (blue) or power status (red) of the unit. Jog switch Controls various functions when listening to music. Adjust the volume of this unit when talking over the telephone. 9 DR-BT100CX_4-130-037-11(1)
ページ10に含まれる内容の要旨
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. Tips 1 Open the cover of the USB ( ) If the USB cable is connected to a
=> jack. computer while the unit is turned on, the unit will be turned off automatically. Connect the supplied USB ( ) To charge the unit from an AC outlet, use
=> cable to the unit, and then the USB charging AC power adaptor AC- U50A (sold separately*). For details, refer connect the
ページ11に含まれる内容の要旨
Caution Usage hours* If this unit detects a problem while Status Approx. charging, the indicator (red) may turn usage hours off, although charging is not complete. Communication time 8 hours Check for the following causes: (including music – Ambient temperature exceeds the playback time) (up to) range of 0 °C – 40 °C. Standby time (up to) 120 hours – There is a problem with the battery. In this case, charge again within the * Time stated above may vary, depending on above-mentioned tempera
ページ12に含まれる内容の要旨
Pairing What is pairing? Procedures of pairing Bluetooth devices need to be “paired” 1 Place the Bluetooth device with each other beforehand. within 1 m of this unit. Once Bluetooth devices are paired, there is no need for pairing again, Press and hold the PAIRING except in the following cases: button for seconds or more to Pairing information is deleted after
=> standby for pairing while the repair, etc. unit is turned off. This unit is paired with 9 or more
=> devices. This unit
ページ13に含まれる内容の要旨
Perform pairing procedure on 6 Start the Bluetooth connection the Bluetooth device to detect from the Bluetooth device. this unit. This unit memorizes the device as the last connected device. Some The list of detected devices appears Bluetooth devices may connect on the display of the Bluetooth with the unit automatically when device. This unit is displayed as pairing is complete. “DR-BT100CX.” If “DR-BT100CX” is not displayed, repeat from step 1. Tips To pair with other Bluetooth d
ページ14に含まれる内容の要旨
Wearing the unit To use the clip How to install the earbuds correctly 1 Clip this unit to a pocket, etc., If the earbuds do not fit your ears of your clothes and then wear correctly, low-bass sound may not be the headphones. heard. To enjoy better sound quality, Wear the earphone marked in change the earbuds to another size, or your left ear, and the one marked adjust the earbuds position to sit on in your right ear. your ears comfortably and fit your ears snugly. If the earbuds d
ページ15に含まれる内容の要旨
Indications of Bluetooth function : Indicator (blue) : Indicator (red) Status Flashing patterns Searching … — — — — — — — — … — — — — — — — — Connectable … —— —— —— —— —— — Connecting … — — — — — — HFP/HSP or A2DP … ————————— ————— (standby for receiving audio signal) — HFP/HSP and A2DP … — ——————— — ——— (standby for receiving audio signal) — Listening … ———————— ———— — Listening during standby … ——————— ——— for telephone call — Incoming call … — Tal
ページ16に含まれる内容の要旨
OPERATING THE UNIT Listening to music Note After the unit is turned on, the unit Jog switch attempts to connect to the last connected Bluetooth device automatically with HFP or HSP. When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 22. Make the Bluetooth connection (ADP) from a Bluetooth device POWER button to this unit. Refer to the operating instructions T
ページ17に含まれる内容の要旨
To adjust the volume Controlling the audio Push the jog switch up or down while device – AVRCP listening to music to adjust the volume. If the Bluetooth audio device Tips connected with this unit supports Depending on the connected device, it
=> AVRCP (Audio Video Remote may be necessary to adjust the volume on Control Profile), you can control by the connected device as well. using the unit buttons. Volume for calling and listening to music
=> Refer to the operating instructions can
ページ18に含まれる内容の要旨
Tip Depending on the Bluetooth device, the fast- forward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about seconds to turn off the unit. Press and hold the POWER button and jog switch ( ) for about 7 seconds. The indicator (blue) flashes once. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice. Note You cannot adjust the volume of the
ページ19に含まれる内容の要旨
Calling When this unit does not Jog switch connect to a Bluetooth mobile phone automatically You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. To make a connection by operating Bluetooth mobile POWER phone button Multi function 1 Make the Bluetooth connection button (HFP or HSP*) from the Check the following before operating Bluetooth mobile phone to this the unit. unit. – The Bluetooth functio
ページ20に含まれる内容の要旨
– ring tone set on the unit To make a connection with – ring tone set on the mobile the last connected Bluetooth phone device by operating this unit – ring tone set on the mobile phone only for Bluetooth 1 Press the multi function button. connection The indicator (blue) starts flashing, Note and the unit performs the If you received a call by pressing the connection operation for about 5 button on the Bluetooth mobile phone, seconds. some Bluetooth mobile phones may have Note hands
