ページ1に含まれる内容の要旨
2ND PRINTING DEC 99
STD VERSION
OWNER’S MANUAL OWNER’S MANUAL
OWNER’S MANUAL OWNER’S MANUAL OWNER’S MANUAL
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-0886
ページ2に含まれる内容の要旨
Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman- ship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating condi- tions. No other product in this machine is hereby covered. Sellers sole liability in the e
ページ3に含まれる内容の要旨
TABLE OF CONTENTS INTRODUCTION OF THE OWNERS MANUAL 1 GENERAL PRECAUTIONS 2~3 1. PRECAUTIONS TO BE HEEDED FOR OPERATION 4~5 2. NAME OF PARTS 6 3. ACCESSORIES 7~8 4. ASSEMBLY AND INSTALLATION 9~15 5. PRECAUTIONS TO BE HEEDED WHEN MOVING MACHINE 16 6. CONTENTS OF GAME 17~21 7. EXPLANATION OF TEST AND DATA DISPLAY 22~32 7-1 SWITCH UNIT AND COIN METER 23 7-2 SYSTEM TEST MODE 24 7-3 GAME TEST MODE 24 7-4 INPUT TEST 25 7-5 OUTPUT TEST 25 7-6 SOUND TEST 26 7-7 C.R.T. TEST 26 7-8 VOLUME S
ページ4に含まれる内容の要旨
SPECIFICATIONS Installation space: 68 in.(L) x 41 in.(W) Height: 84 in. Weight: Approx. 550 lbs. Power maximum current: 3.5 Amp AC 120V 60 Hz MONITOR: 29” NANAO MONITOR INTRODUCTION OF THE OWNERS MANUAL SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information rela
ページ5に含まれる内容の要旨
General Precautions Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with t
ページ6に含まれる内容の要旨
Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other prod- ucts (including amplifiers) that produce heat. Lithium Battery Lithium Battery Lithium Battery Lithium Battery Lithium Battery- Dispose of batteries only in accordance with the battery manufact
ページ7に含まれる内容の要旨
1 . PRECAUTIONS TO BE HEEDED FOR OPERATION In order to prevent accidents, be sure to comply with the following points before and during operation. PRECAUTIONS TO BE HEEDED FOR OPERATION BEFORE STARTING THE OPERATION In order to avoid accidents, check the following before starting the operation: Check if all of the adjusters are in contact with the surface. If they are not, the cabinet can move and cause an accident. Do not climb on the product. Climbing on the product can cause falling down acc
ページ8に含まれる内容の要旨
PRECAUTIONS TO BE HEEDED DURING OPERATION To avoid injury and accidents, those who fall under the following catagories are not allowed to play the game: * Intoxicated persons * Those who have high blood pressure or heart problems. * Those who have experienced muscle convulsion or loss of consciousness when playing video games, etc. * Persons susceptible to motion sickness. * Persons whose acts runs counter to the products warning displays. * Instruct those who wear high-heeled shoes to refrain f
ページ9に含まれる内容の要旨
2 . NAME OF PARTS JAMBO SAFARI STD WEIGHT lbs. GAME SPECIFICATIONS WIDTH in. LENGTH in. HEIGHT in. All measurements are and rounded UP DURING SHIPPING 45” X 70” X 84” ~ 600 LBS. 550 LBS. WHEN ASSEMBLED 39” X 65” X 80” 6
ページ10に含まれる内容の要旨
3 . ACCESSORIES 7
ページ11に含まれる内容の要旨
THE SHIPMENT METHOD DESCRIBED BELOW ONLY APPLIES TO ‘MODEL 3’ BOARDS CONTAINED IN THE FOLLOWING GAMES: LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2 HARLEY DAVIDSON, RALLY 2, DAYTONA 2, DIRT DEVILS, HOUSE OF THE DEAD 2, OCEAN HUNTER, STAR WARS TRILOGY, ZOMBIE REVENGE, CRAZY TAXI, MAJOR LEAGUE BASEBALL, VIRTUA TENNIS, JAMBO SAFARI !!NEVER SHIP MODEL 3 / NAOMI GAME !!NEVER SHIP MODEL 3 / NAOMI GAME BOARDS OUTSIDE OF CAGE!! BOARDS OUTSIDE OF CAGE!! CARTON BOX 601-8928 (1) Use
ページ12に含まれる内容の要旨
4 . ASSEMBLING AND INSTALLATION Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur. When assembling, be sure to perform work by plural persons. Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage. When carrying out the assembly work, follow the procedure in the following 5-item sequence: 1 ASSY
ページ13に含まれる内容の要旨
Install the coin chute tower on the Right-hand side of cabinet. Open the coin chute door and the cashbox door to 1 secure with the 4 hexagon bolts from inside the doors. Please note that the Coin Chute tower is NOT mounted on the Left-hand side as shown above. NOTE: ON SEGA’s CRAZY TAXI GAME THERE IS NOT TWO COCKPITS SIDE BY SIDE AS PICTURED ABOVE. THE GAME HAS ONLY ONE COCKPIT AND THE COIN TOWER WILL MOUNT ON THE RIGHT SIDE AS YOU FACE THE CABINET.. 10
ページ14に含まれる内容の要旨
ASSY OF THE BILLBOARD 2 Due to its large size, it is very difficult for one person alone to install the billboard, Make sure 2 or more persons are available to perform this work. Attempting to perform the installation alone can cause an accident. Mount Billboard on cabinet by ensuring the front lip of the Billboard is securely placed under the mounting bracket 1 already installed on the cabinet. Fasten with the 3 hexagon bolts. 2 Connect all of the 4 connectors inside the Billboard box (This nee
ページ15に含まれる内容の要旨
SECURING IN PLACE (ADJUSTER ADJUSTMENT) 3 Be sure to have all the Adjusters make contact with the surface. Un- less the Adjusters come into contact with the surface, the Cabinet can move of itself, causing an accident. This machine has 4 each of casters and adjusters (shown below). When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and ma
ページ16に含まれる内容の要旨
POWER SUPPLY 4 Ensure that the power cord is not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord can cause an electric shock or short circuit. Ensure that the wiring position is not in the customer's passage way or the wiring has protective covering. Connect the game to the power supply and turn on power to the game. Before connecting power supply be sure that power switch is off Turning the AC unit’s main switch on will
ページ17に含まれる内容の要旨
ASSEMBLING CHECK 5 The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and game related various functions to be performed. Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD. Selecting the INPUT TEST on the Test Mode menu screen causes the screen (on Which each switch adnV.R. are tested) to be displayed. Pres
ページ18に含まれる内容の要旨
SOUND TEST In the TEST mode, selecting SOUND TEST causes the screen, on which sound related BD and wiring connec- VOICE tions are tested, to be displayed. Be sure to check if the EFFECT sound is satisfactorily emitted from each of speaker and B.G.M. the sound volume is appropriate. >EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT C.R.T. TEST 1/2 12345678901234567890123456789012123456789012 1 234567890123456789012345678901212345678901 2
ページ19に含まれる内容の要旨
5 . PRECATIONS TO BE HEEDED WHEN MOVING THE MACHINE When moving the machine, be sure to pull out the plug from the power supply. Moving the machine with the plug as is inserted can damage the power cord and cause a fire or elec- tric shock. When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords. Damaging the power cords can cause an electric shock and/or
ページ20に含まれる内容の要旨
6 . CONTENTS OF GAME The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occured. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. During the Advertise mode, the Billboard’s Decoration Lamp lights up periodically. When the machine is energized, the Billboard’s Fluorescent Lamp is always lit. The Steering Wh
