ページ1に含まれる内容の要旨
DTU193_Manual.fm Page -3 Monday, September 15, 2008 2:42 PM
Installation Guide & User’s Manual
Installations- und Benutzerhandbuch
Guide d’installation et Manuel d’utilisation
ページ2に含まれる内容の要旨
DTU193_Manual.fm Page -2 Monday, September 15, 2008 2:42 PM DTU-1931A Installation Guide & User’s Manual Version 1.1, September 15, 2008 Copyright © Wacom Co., Ltd., 2008 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the
ページ3に含まれる内容の要旨
DTU193_Manual.fm Page -1 Monday, September 15, 2008 2:42 PM Installation Guide & User’s Manual
ページ4に含まれる内容の要旨
DTU193_Manual.fm Page 0 Monday, September 15, 2008 2:42 PM
ページ5に含まれる内容の要旨
DTU193_Manual.fm Page 1 Monday, September 15, 2008 2:42 PM INTRODUCTION AND OVERVIEW ® The Wacom DTU-1931 pen display combines the benefits of a Liquid Crystal Display (LCD) with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives you a direct pen-on-screen interface for your computer. The basic components of the DTU-1931 include a Wacom pen tablet internally mounted behind a 19.0" diagonal TFT color display, and a Wacom pen. The display and
ページ6に含まれる内容の要旨
DTU193_Manual.fm Page 2 Monday, September 15, 2008 2:42 PM PRECAUTIONS To ensure the safe usage of your product, be sure to follow all instructions, cautions, and warnings found within this manual. Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the product. This symbol indicates an item that, if disregarded, may lead WARNING to loss of human li
ページ7に含まれる内容の要旨
DTU193_Manual.fm Page 3 Monday, September 15, 2008 2:42 PM USAGE WARNING Only use the power adapter that came with the DTU-1931. If a different type of power adapter is used, the DTU-1931 will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a different power adapter will void your warranty. Be sure to use a grounded power source when applying power to the DTU-1931. CAUTION Do not connect or disconnect the vide
ページ8に含まれる内容の要旨
DTU193_Manual.fm Page 4 Monday, September 15, 2008 2:42 PM CAUTION Do not put heavy articles on the pen display or push against it with a strong force; this may damage the display screen or bend the stand. Do not place heavy articles on the DTU-1931 cabling, repeatedly bend the cables CAUTION sharply, or apply heavy stress to the cable connectors; this may damage the unit or cabling. CAUTION If the pen tip becomes sharp or angular, it may damage the coating on the display screen. Replace
ページ9に含まれる内容の要旨
DTU193_Manual.fm Page 5 Monday, September 15, 2008 2:42 PM CONTENTS Introduction and overview 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ10に含まれる内容の要旨
DTU193_Manual.fm Page 6 Monday, September 15, 2008 2:42 PM About the Windows Vista Tablet PC Input Panel . . . . . . . . . . . . . . . . . 42 Uninstalling the DTU-1931 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Product specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Display . . . . . . . . . . . . . . . . . .
ページ11に含まれる内容の要旨
DTU193_Manual.fm Page 7 Monday, September 15, 2008 2:42 PM YOUR NEW DTU-1931 PACKAGE CONTENTS Carefully unpack all items and place them on a stable desktop or work surface. Verify the contents are complete. Power adapter and power cable DTU-1931 pen display (POW-A104 and SCD-A060, SCD-A061, or SCD-A062 (depending on region)) USB cable (STJ-A275) Pen with replacement nibs and nib removal tool (UP-817E) Pen tether (PKB-A025) Analog RGB cable (STJ-A274) Installation Guide & User
ページ12に含まれる内容の要旨
DTU193_Manual.fm Page 8 Monday, September 15, 2008 2:42 PM PEN DISPLAY COMPONENTS Familiarize yourself with the many features and components of your product. FRONT VIEW On Screen Display (OSD) controls These controls enable you to adjust a variety of display settings. See Adjusting the display on page 24. Status LED Lights blue when the pen is in the active area of the pen display tablet and the pen tip is pressed. The USB cable must also be plugged into an active USB port before the
ページ13に含まれる内容の要旨
DTU193_Manual.fm Page 9 Monday, September 15, 2008 2:42 PM REAR VIEW Pen storage compartment To store, insert one end of the pen into either side of the compartment. Then gently press the other end of the pen into the compartment. To remove, press in on either end of the pen. This will pop the opposite end out of the compartment so you can remove the pen. Kensington security slot Allows easy attachment of a security cable. Stand adjustment lever DVI/VGA (digital/analog) switch Set this s
ページ14に含まれる内容の要旨
DTU193_Manual.fm Page 10 Monday, September 15, 2008 2:42 PM ADJUSTING DISPLAY INCLINE • To open the display stand, pull up on the adjustment lever and swing the stand out to the desired incline. Release the lever to lock the stand in place. • To close the stand, pull up on the adjustment lever and gently move the stand back into the closed position until the latch catches. Release the lever to lock the stand in place. CAUTION Be careful to avoid catching your finger in the gap of
ページ15に含まれる内容の要旨
DTU193_Manual.fm Page 11 Monday, September 15, 2008 2:42 PM INSTALLATION SYSTEM REQUIREMENTS Before installing the DTU-1931, make sure your computer meets the following minimum system requirements: • PC. Windows Vista™, Vista X64, XP, or XP x64. VGA or DVI video connector, available USB port, and CD-ROM drive. • Macintosh. OS X, v10.4 or greater. VGA or DVI video connector, available USB port, and CD-ROM drive. ADC connectors require an ADC to DVI adapter, not included. The DTU-1931 s
ページ16に含まれる内容の要旨
DTU193_Manual.fm Page 12 Monday, September 15, 2008 2:42 PM STEP1: LCD MONITOR INSTALLATION In this step, the DTU-1931 is installed as a monitor on your system. IMPORTANT: Do not connect the USB data cable until instructed to do so. • Turn off your computer. Caution: Never connect or disconnect the video or power cables while your computer or DTU-1931 are powered on – this can damage the display or video card. • If your computer has only one video connector, you will need to unplug your prev
ページ17に含まれる内容の要旨
DTU193_Manual.fm Page 13 Monday, September 15, 2008 2:42 PM LCD MONITOR CABLING DIAGRAM CAUTION Make sure your video card has a VGA or DVI connector, and that you correctly set the DVI/VGA switch for the video connector you are using. Do not attach the USB data cable until instructed to do so. Use the DVI-I OUT port to connect a second device, such as a projector or monitor, that mirrors the pen display. Fully install the DTU-1931 – A – VGA or DVI Analog (VGA) hardware and software bef
ページ18に含まれる内容の要旨
DTU193_Manual.fm Page 14 Monday, September 15, 2008 2:42 PM • Next, turn on your computer. For Windows systems: The DTU-1931 will automatically install as a default monitor. If you want the DTU-1931 to be identified as a DTU-1931 display and if you want to install the color calibration profile for the DTU-1931, follow the instructions below to update the display driver: 1. Open the CONTROL PANEL folder. • For Windows Vista, under APPEARANCE and PERSONALIZATION select ADJUST SCREEN RESOLUT
ページ19に含まれる内容の要旨
DTU193_Manual.fm Page 15 Monday, September 15, 2008 2:42 PM • As necessary, configure the display control panel settings for the proper size and color resolution. The maximum (native) resolution of the DTU-1931 is 1280 x 1024 pixels. The display size and color resolution may be constrained by the capabilities of your video card. See the video card manufacturer’s documentation for details. Windows: If you are using the DTU-1931 as a secondary display, you may first need to enable the DT
ページ20に含まれる内容の要旨
DTU193_Manual.fm Page 16 Monday, September 15, 2008 2:42 PM STEP 2: PEN TABLET INSTALLATION USB CABLE INSTALLATION Plug the square end of the USB cable into the DTU-1931 port labeled USB. Plug the other end into an available USB port on your computer or on a USB hub attached to your computer. See – E – in the diagram below. Next, move on to the Software installation on page 17. PEN TABLET CABLING DIAGRAM USB port – E – To USB port Your computer Installation Page 16
