ページ1に含まれる内容の要旨
RoyalTek
Bluetooth GPS
Datalog Receiver
MBT-1100
User Manual
V1.0
Published on March 2008 by RoyalTek Company Ltd.
(Design and specifications are subject to change without notice.)
1
PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ2に含まれる内容の要旨
Content 1. Product Introduction ..............................................................3 1.1 Overview...............................................................................................................3 1.2 Main Features .......................................................................................................3 1.3 Product Notification.............................................................................................3 1.4 Application...............
ページ3に含まれる内容の要旨
1. Product Introduction 1.1 Overview The MBT-1100 is equipped with the latest GPS solution for fast and accurate fix on GPS signals. This latest round of technology advancements gives the users an “instant on” feel, and the experience in navigation becomes more natural. The dimension of 69.5(L) x 23(W) x 20(H) and weight only 38g, making it an ideal solution to carry everywhere. 1.2 Main Features l NMEA0183 compliant protocol l Extreme fast TTFF at low signal level. l Adopt TCXO as
ページ4に含まれる内容の要旨
1.5 Specification GPS receiver 1 Frequency L1 1575.42MHz. 2 Code C.A. Code. 3 Chipset Sensitivity -158dBm (tracking) 4 Chipset cold start 36 sec @ open sky 5 Chipset warm start 33 sec @ open sky 6 Chipset hot start 1 sec @ open sky 7 Reacquisition Less than 1s 8 Position accuracy Without aid: 3.0m 2D-RMS DGPS (WAAS, EGNOS, MASA, RTCM): 2.5m 9 Maximum altitude 18000 m 10 Maximum velocity 515 meter/second maximum 11 Update rate Continuous operation: 1Hz 12 Dimension (L x W x H) 69.5
ページ5に含まれる内容の要旨
25 Status LEDs showing GPS, Bluetooth, Power, Memory status 26 Original Display 1 Yellow LED indicates power is in charging 2 Blinking Amber LED indicates Battery Low 3 Glowing Green LED indicates position is fixed Blinking Green LED indicates position not fixed 4 Glowing RED LED indicates Memory Full (GPS Green LED off) Erased memory data, RED LED Blinking 5 Glowing Blue LED indicates Bluetooth is connected Blinking Blue LED indicates Bluetooth is not fixed Location Log 27 Data
ページ6に含まれる内容の要旨
2. Before Start 2.1 Check the Package Content Before you start using MBT-1100, please check out if your package includes the following items. If any item is damaged or missed, please contact your reseller at once. ● MBT-1100 Bluetooth GPS datalog receiver ● Car Charger ● CD ● AC Adapter (optional) ● USB cable ● PU GRIP PAD 2.2 Power Button (Right View) Power On/Off button PDF 檔案以 "pdfFactory Pro" 試用版建立 ÿ www.pdffactory.com
ページ7に含まれる内容の要旨
2.3 LED Display 1 2 3 4 5 1 Yellow LED indicates power is in charging 2 Blinking Amber LED indicates Battery Low 3 Glowing Blue LED indicates Bluetooth is connected Blinking Blue LED indicates Bluetooth is not fixed 4 Glowing Green LED indicates position is fixed Blinking Green LED indicates position not fixed 5 Glowing RED LED indicates Memory Full Erased memory data, RED LED Blinking 2.4 Hardware Features 2.4.1. Power Button Power ON / Power OFF 2.4.
ページ8に含まれる内容の要旨
2.4.4. Memory Status LED (Red) Glowing – Memory is full. 2.4.5. Battery Status LED (Amber/Yellow) None - Battery has adequate power supply. Amber - Power is low. Charging immediately is required. Yellow - Connected to power charger, charging. LED off - Battery is fully charged. 2.5. Getting Started 2.5.1. STEP 1: Turn on Receiver and Wait for GPS Fix If the position has not been fixed yet, the Green LED will be still. If the position has been fixed, the Green LED will be Glo
ページ9に含まれる内容の要旨
2.6 How to use Car Charger to charge your handheld device l Connect car charger into your adapter connector of MBT-1100. l Plug adapter connector into handheld device connector and plug car charger into cigar-lighter. 9 PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ10に含まれる内容の要旨
3. Utility Installation The Main Menu of Installation CD shows as above. l Click the Install USB Driver (Windows 2000/XP/2003) or Install USB Driver (Windows Vista family) to install the USB Driver, which is needed when you connect the MBT-1100 to your PC or Notebook. l Click the PC Software to install the software application. l Click the User Manual to open the user manual of MBT-1100. l Click the View Royaltek Website to link our http://www.royaltek.com, please make sure your
ページ11に含まれる内容の要旨
3.1 Install USB Driver (Windows 2000/XP/2003) or (Windows Vista family) Install the USB Driver from CD. When screen shows the installation window as follows: Click “Next> to next page”, or click”
ページ12に含まれる内容の要旨
For USB Driver Vista version, if re-install, please click”” to remove the driver. If click ””, install may occur hand up problem. PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ13に含まれる内容の要旨
3.2 Install Data download Utility Click “Next> to next page”, or click”” to next page, or click”
ページ14に含まれる内容の要旨
Click “Install” to start installation. Or click”
ページ15に含まれる内容の要旨
Start installation. Please click “Finish” to finish the Installation. 15 PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ16に含まれる内容の要旨
Finally you will see the icon on windows desk. 16 PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ17に含まれる内容の要旨
3.3 Transfer data to your PC or Notebook Usage Notes: (1) When you turn on the power button, it starts to search the GPS Signal. After the GPS position fixed, it will begin to record and save the position data. (2) If you want to stop recording the GPS data, just turn the power off. (3) When download or erase data form MBT-1100, Receiver still continues record and save the position data. (4) The time of the log data of MBT-1100 is UTC Time. User doesn’t need to adjust the Clock set
ページ18に含まれる内容の要旨
3.3.2 Download Data Step 1: Change page to “Data Download” menu bar. Step 2: Press “Get Data” button and select NMEA output folder. Step 3: When download finish, there will be a warning message to ask for erasing memory. PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com
ページ19に含まれる内容の要旨
3.3.3 Get and Set MBT-1100 Device Status Step1: Change to “Device Status” menu bar Step 2: You can review the MBT-1100 default setting configuration. ◆Time Interval (user adjustable) Default setting is 15secs 1secs ~ 60secs, user adjustable 5Hz：Change log by time interval to 5, check if the log time had been changed to 0.2 seconds ◆Data Type (user adjustable) There are 5 options for user to choose these data items to be saved in the PDF 檔案以 "pdfFactory Pro" 試用版
ページ20に含まれる内容の要旨
MBT-1100. 1: Longitude, Latitude, will be saved. 2: Longitude, Latitude, Altitude, will be saved. 3: Longitude, Latitude, Altitude, Velocity will be saved. 4: Longitude, Latitude, Altitude, Velocity, Delta Distance will be saved. 5: Time, Latitude, Longitude, Altitude, Speed, Distance, PDOP, HDOP, VDOP, No of SV in used, SV info (SNR, Elevation, Azimuth) For this mode, you will get the full sentence of $GPGGA, $GPGLL, $GPGSA, $GPGSV, $GPRMC, $GPVT will be saved. Note: $RTDIST,A,3,1.
