ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Please read this manual before you start using this device ...............................................................2 General tips for GPS application.......................................................................................................2 Function introduction........................................................................................................................7 Video Playback ..............................................................................
ページ3に含まれる内容の要旨
Please read this manual before you start using this device Thanks for purchasing our product. Please read this manual carefully before starting to use this device. When you use this device, you are supposed to learn well of this product. The information in this manual has been verified for its accuracy. But no liability will be applied for the correctness of mapping data of navigation, technical and/or editorial interpretation or illustration, or the printing and translation of this man
ページ4に含まれる内容の要旨
satellites when you are in different places, this is called "Satellite Path", a "Satellite Path" only covers a range of 300 KM. If a "Satellite Path" is defined at place A, then turn off the device and move to another place beyond 300 KM away from A, the device is under another "Satellite Path", At this moment, the device needs to search for satellite signal again. To track the new "Satellite Path", this will take quite a long time. To save time for this searching, you may click "GPS Reset
ページ5に含まれる内容の要旨
Warnings: Please install the device in a right way to avoid driver's sight and airbag to be hindered. Any loss or damage of product, passengers, or other property caused by mistakes of mounting or installing of the device will be not covered within the warranty and not be the responsibility of the manufacturer. Please do not put on earphone and operate the device when you drive or ride a bike to ensure your safety. Please consult with airline crew for application of the device if y
ページ6に含まれる内容の要旨
Appearance and Port Description: Accessories: Car charger USB Cable Bracket Cradle User Manual Warranty card Map instructions Illustrations on screen display: System UI(Projector Screen) Under this UI, click icon down the screen to enter the function page. Then there will be Looped playback of cartoon, click it to entry this function. If you click the icons beside the function icon you can enjoy the cartoons. Secondary UI(Projector Screen) 5
ページ7に含まれる内容の要旨
In this interface, click the icons on the screen to enter the corresponding functions; and click the arrow on the right bottom to turn the page. There will be an animation effect when turning the page. Battery Status Icon: Full======================================================>Drained When the battery is at low power level, please charge it immediately to ensure the device work normally. Charging: Warnings for charging: 1. A new battery may be empty and not charged
ページ8に含まれる内容の要旨
When you use car charger, please start car engine first, then connect it to the device to avoid possible damage to the device due to overloaded pulse current during ignition. Please pull it out when you stop the engine, and plug it in again after next ignition. Power On the device In power off status, please press the power button for a while to turn on the device, then the OSD will be displayed on screen. Sleeping & Power –off In power-on mode, press the power button on the
ページ9に含まれる内容の要旨
Video Playback This feature is for video file playing, with the formats: AVI, MPEG, MPG, ASX, ,ASF and WMV. Operation: On system main menu, click icon to enter into Video Playback application. Display of UI for file selection: On this UI, click icon to search video files not listed in the appointed video file folder; Click icon to close and exit from Video Playback application; Double click or select then click icon to open and play this file. UI and button definition: Play
ページ10に含まれる内容の要旨
few minutes to search files when video play mode starts if this application has not been used for a long time. Music Playback This is for Music Playback with format of MP3, WMA, WAV. Operation：On system main menu, click icon to play music. Screen display is shown as the illustration below: On this UI, click icon to search for music files not in selected folder; click icon to close this window and exit music play mode; double click, or select then click icon to play this music fil
ページ11に含まれる内容の要旨
Picture Display This is for Photo Display with format JPG, BMP and GIF stored in NandFlash or TF card. Operation: On system main menu, click icon to enter into Picture Display function. Display of UI for file selection: On this UI, click icon to search photo files not listed in the appointed picture file folder; click icon to close current UI and exit Picture Display function; double click or select then click icon to open or play this file. Display shown as the right illustration:
ページ12に含まれる内容の要旨
eBook Reading This if for eBook Reading with format .txt stored in NandFlash or TF card. Operation: On system main menu, click icon to enter into eBook Reading application. Display of UI for file selection: On this menu, click icon to search for txt files not in selected folder; click icon to close this window and exit file reading mode; double click icon, or select then click icon to open this file. The screen display is shown as follows: Click or icon to turn page up or d
ページ13に含まれる内容の要旨
In eBook Reading mode, click right icon to enter into bookmark setting, display of dialogueblock is shown as in the illustration below: Click icon to set a bookmark for the current page. Directly click selected bookmark stored in the dialogueblock to remove this bookmark; click icon to jump to the bookmarked page. Click icon to exit bookmark setting and return back to eBook Reading mode. Jump to the appointed page This is for jumping to the appointed page when reading a voluminous art
ページ14に含まれる内容の要旨
In system setting, there10 items for setting, click directly each item to change setting for it. Details will be described one by one below. Language Setting This is for setting of system language, screen display is shown as the illustration below: Click the icons of the corresponding language in this interface or choose the interface project, the system will save the setup automatically when the setup is closed, and return to the previous menu. (The system will be required to restar
ページ15に含まれる内容の要旨
disabled. After setting, close the current window to save. Power Management This is for setting power saving mode, and adjusting time to start power saving when no operation on the device. In drag menu to select time, select “No” for disabling this feature. After setting, close the current window to save. Sound Setting This is for setting Startup Sound, button operation on screen, and total volume. After entering into this UI, screen display is shown as the illustration below: l
ページ16に含まれる内容の要旨
"NandFlash" is the inside memory of the device, "SDMMC" is the TF card. So the start-up music can be selected from both of them. Select one, click the button icon to confirm, then back to the upper-level interface. Time Setting This is for setting time of the system. After entering into this UI, screen display is shown as the illustration below: On this UI, click icon on the screen to set. After setting, close the current window to save. System Resources This is for checking syste
ページ17に含まれる内容の要旨
On this UI, use stylus to tap at the center of the cross, then tap on other crosses which will move after each tapping until finish. Update Logo The function is for updating start-up logo of the device. Please be sure that you have stored the Logo pictures into the TF card. After entering into this UI you will see the interface shown below : If there is no logo file in the current TF card, please copy the logo file into it or change another TF card having upgrade file, then click
ページ18に含まれる内容の要旨
GPS Path Using this function is to set GPS path for your navigation. Screen display will show as follows: Files listed on the present screen belong to the saved ones in TF card, so click them can read the file. File folders of TF card will be listed on screen. Click a folder to open it. Select GPS Software If there are two or more maps from different companies on an TF card, then this feature can help you select each of them easily. The way to Select: :In TF card directory, open the
ページ19に含まれる内容の要旨
Click icon on the upper right corner to return to GPS path interface.. FLASH formatting functions: In the path setup interface, as shown: Click the icon, enter the format: interface, as shown: Select the desired formatting and click icon format, as shown: Warm remind The machine can not use a computer format, you can use the tools inside the machine format, methods of operation: Please select the system configuration / GPS path / formatting functionality mode, you can confirm
ページ20に含まれる内容の要旨
Click the desired connection mode and close the window to save the chosen mode. How to save and allocate files in TF card: Usually, the files used by the device are saved in the appointed folders to ensure the access for embedded program of the device. You may save files into other folders or under root directory of the TF card. If the files are saved in the appointed folders, when opening the corresponding application, these files can be seen directly; If not in the folders, then yo
