RoyalTek RTG-2000の取扱説明書

ページ1に含まれる内容の要旨

RoyalTek Bluetooth GPS Receiver
RTG-2000 Quick Guide

Check the Package Content
Before start using your RoyalTek Bluetooth GPS + RDS TMC Receiver,
RTG-2000, please check if your package includes the following items. If any
item is damaged or missing, please contact your reseller at once.
●RTG-2000 ●External TMC Antenna ●Car Charger
Power Switch, Power Jack & External Antenna Port
Right View
Power
Switch


External GPS
Power Jack
Antenna Port

(optional)




Left View
En

ページ2に含まれる内容の要旨

External TMC Antenna Port LED Display Front View 1 2 3 4 Battery Status GPS Status Bluetooth Status 1 Yellow LED indicates power is in charging 2 Blinking red LED indicates low power 3 Glowing Green LED indicates position is fixed 4 Glowing Blue LED indicates Bluetooth is connected Getting Started STEP 1: Charge the Battery English 2

ページ3に含まれる内容の要旨

Before you use RTG-2000, the battery must be charged for at least six hours. Plug car charger into power jack and cigar-lighter separately. As RTG-2000 is in charging, the Yellow LED will be lighted up. When the battery is fully charged, the Yellow LED will be turned off. Unplug car charger from power jack and cigar-lighter separately. STEP 2: Turn on Receiver and wait for GPS fix If the position has not been fixed yet, the Green LED will be blinking. STEP 3: Connect to Bluetooth-enabled

ページ4に含まれる内容の要旨

“0000”. TMC Function ◆ TMC stands for Traffic Message Channel, which allows you to receive real time messages concerning traffic conditions. Please refer to the navigation software manual for basic set up process and usage. How to use Car Holder 1. Joint gooseneck with holder. 2. Suction mount to windshield or any flat, smooth surface or use self-adhesive power disc connector to mount on other surfaces. 3. Squeeze sides to close and press button to release. • Never leave your handheld