ページ1に含まれる内容の要旨
RoyalTek Bluetooth
GPS Receiver
RBT-2210
User Manual
Version 1.1
SiRF Star III GPS Engine Inside
Published on May, 2008 by RoyalTek Company Ltd.
i
ページ2に含まれる内容の要旨
Content 1. Product Introduction ................................................................4 1.1 Overview..........................................................................................................4 1.2 Main Features...................................................................................................4 1.3 Product Notification.........................................................................................4 1.4 Application...........................
ページ3に含まれる内容の要旨
4.2.3. About:.................................................................................................17 4.2.4. Action:................................................................................................17 4.2.5. ..................................................................................................17 4.3. Cold/Warm/Hot Start ....................................................................................18 4.4. NMEA Configuration.........................
ページ4に含まれる内容の要旨
1. Product Introduction 1.1 Overview RoyalTek the first SiRF Star III Bluetooth GPS receiver, RBT-2210, is the successor of well-known RBT-2210 Bluetooth GPS receiver in 2006. It uses SIRF Star III extreme fast TTFF GPS engine and inherits the previous strength point by using the same battery (Lithium-ion battery) of Nokia 6100 cell phone. With the same dimension of 72(L) x 41(W) x 24mm(H) and weight only 62g, making it an ideal solution to carry everywhere. 1.2 Main Features
ページ5に含まれる内容の要旨
2. Before Start 2.1 Check the Package Content Before you start using RBT-2210, please check out if your package includes the following items. If any item is damaged or missed, please contact your reseller at once. ● RBT-2210 Bluetooth GPS receiver ● Car Charger ● CD (optional) ● AC Adapter(optional) ● External antenna(optional) ● Backup battery(optional) ● Leather case(optional) ● String(optional) 2.2 Power Switch, Power Jack & External Antenna Port Power External Antenna
ページ6に含まれる内容の要旨
2.3 LED Display 1 2 3 4 1 Yellow LED indicates power is in charging 2 Blinking Red LED indicates low power 3 Glowing Green LED indicates position is fixed 4 Glowing Blue LED indicates Bluetooth is connected 2.4 Hardware Features 2.4.1. Power Switch Power ON / Power OFF 2.4.2. Power Jack The power jack allows you to connect to either a DC (included) or AC power charger to recharge the internal battery. 2.4.3. External Antenna Port (Optional) If you have an
ページ7に含まれる内容の要旨
2.4.5. GPS Status LED (Green) Glowing - Position is fixed. Steady light – Device is on but position is not fixed. 2.4.6. Battery Status LED (Red/Yellow) None - Battery has adequate power supply. Red - Power is low. Charging immediately is required. Yellow - Connected to power charger, charging. LED off - Battery is fully charged. 2.5. Getting Started 2.5.1. STEP 1: Charge the Battery Before you use RBT-2210, the battery must be charged for at least 4 hours. Plug car charger
ページ8に含まれる内容の要旨
COM port that your Bluetooth-enabled mobile device will use for serial communication. Now you should be ready to use your GPS application as directed by the user documentation that came with the software. More configurations may be necessary. Refer to the following software application user manual to set up the parameters of the device via Bluetooth radio. 2.6 How to replace Lithium-ion Battery Open the bolt on the bottom cover of RBT-2210 and take the Lithium-ion battery out.
ページ9に含まれる内容の要旨
3. Software Installation The Main Menu of Installation CD shows as above. Click the Software for Windows to install the PC software application. Click the Software for Pocket PC to install the PDA software application. Click the Software for Palm OS to install Palm software application. Click the User Manual to open the user manual of Bluetooth GPS. Click the View Royaltek Website to link our http://www.royaltek.com, please make sure your PC connects to Internet fi
ページ10に含まれる内容の要旨
3.1. Install PDA Software Application Before you click the “Software for Pocket PC ” to install the PDA software application from CD, you have to synchronize the PDA and your system. Then the following window will show in your system as below: Click “Yes>” to continue. Or click ”No” to select the other destination to install, or “Cancel” to give up installation. Click “ OK” to complete the installation. 10
ページ11に含まれる内容の要旨
11
ページ12に含まれる内容の要旨
You can also see the “Installing RoyakTek” message box. Note: About to install the software application to your PDA, please refer to your user manual of your PDA manufacturer. 12
ページ13に含まれる内容の要旨
3.2. Install PC Software Application Install the pc software application from CD. When screen shows the installation window as follows: Click “Next> to next page”, or click”
ページ14に含まれる内容の要旨
Click “ I accept the terms of the license agreement” then click “Next>” to next page, or click”
ページ15に含まれる内容の要旨
Then start installation. And finish installation will ask you to restart your computer as follow window. Please click “Finish” to finish the Installation. 3.3 Install Palm Software Application 15
ページ16に含まれる内容の要旨
Note: To execute this Palm Software Application, please install Palm software in advance. 4. GPS Test on PDA 4.1. Execute GPS Demo Program Execute RoyalTek GPS Demo program by double clicking RoyalTek GPS Demo icon on Programs menu. 16
ページ17に含まれる内容の要旨
4.2. GPS Demo Screen Satellite View GPS Data View Signal View 4.2.1. GPS Port: Searching GPS port automatically or select COM1 as the default COM port. 4.2.2. Baud Rate: Select baud rate: 57600. 4.2.3. About: Displays software version. 4.2.4. Action: Select GPS action. 4.2.5. Next screen. 17
ページ18に含まれる内容の要旨
4.3. Cold/Warm/Hot Start Selecting Cold/Warm/Hot Start in function scroll bar, then click Action to initialize Cold/Warm/Hot Start function. 4.4. NMEA Configuration Selecting NMEA CFG in function scroll bar, then click Action to do NMEA sentence setting. 18
ページ19に含まれる内容の要旨
4.5. About This page shows the software version and the copyright claim. 4.6. Next Screen Clicking > to switch GPS bar chart image to have more GPS data. 19
ページ20に含まれる内容の要旨
5. GPS Test on PC 5.1. Execute GPS Demo Program Execute GPS Demo program by double clicking RoyalTek GPS Demo icon on Programs menu. 5.2. GPS Demo Screen Satellite View GPS Data View Signal View 5.2.1. GPS Port: Searching GPS port automatically or select COM1 as the default COM port. 5.2.2. Baud Rate: Select baud rate: 57600. 5.2.3. About: Displays software version. 20
