ページ1に含まれる内容の要旨
110.00 mm
®
Bluetooth Hands-free Car Kit
with LCD display
PBT70R
User Manual
Environmental
friendly
90.00 mm
ページ2に含まれる内容の要旨
() 封面内页
ページ3に含まれる内容の要旨
TableofContent I. Profile and Its Function…………...................…..........………………………………………………….…4 I-1 Profile…….……...................…...............………………………………………………………….…4 I-2 Function……...................................…………………………………………………………….……5 II. How to Use……...............................…………………………………………………………………………6 II-1 Installation of the Hands-Free Car Kit ......................................….………………………..…..6 II-2 Optional mounting method.........................................
ページ4に含まれる内容の要旨
I. Profile and Its Function I-1 Profile() please refer to Fig.1 Built-in Microphone Battery icon Mic Metal Stand with 2-side tape Phone 1 icon 7 Phone 2 icon Mute icon 1 Mic 2 Fig.1 3 LD77A 4 1. On/Off 6 2. Volume Up 5 3. Volume Down 4. LED 5. Speaker 6. 12 - 24V Power Connector PBT70R 7. LCD display 4
ページ5に含まれる内容の要旨
I-2 Function (please refer to Fig.1) 1O . n/Off If you press “On / Off ”, you can: Switch on and off Pair Answer a new call Reject a call Make a new call using voice dialing 2. Volume Up Increase the speaker volume Mute / un-mute the microphone 3. Volume Down Redial the last dialed number Decrease the speaker volume Answer call waiting 4L . ED There are two LED colors ( blue and red ) to indicate the state of this Car Kit. 5. Speaker 6. 12-24V Power Connector Connect the Car Kit with the cigaret
ページ6に含まれる内容の要旨
II. HowtoUse II-1 Installation of the Hands-free Car Kit(, please refer to Fig.2 Fig.3 and Fig.4) Thank you for buying the PBT70R, Bluetooth Hands-free Car Kit. Whenever you use the Hands-free Car Kit, please plug the Car Kit into the cigarette lighter socket in your car to get the power. 1. Attach the metal stand to the desired position. Fig.2 3. Slide the LCD 77A LCD display into the metal stand. 2. Put the PBT70R into the cigarette lighter socket. Installation complete. Fig.3 Fig.4 cigarette
ページ7に含まれる内容の要旨
II-2 Optional mounting method (user needs to purchase the air vent clip separately). (, please refer to Fig.5 Fig.6 and Fig.7) 1. Put the PBT70R into the cigarette lighter socket. Air vent window Cigarette lighter socket Fig.5 2. Slide the air vent clip into the air vent window in your car as indicated. Air vent window LD 77A Air vent clip 3. Installation complete. Fig.6 Fig.7 7
ページ8に含まれる内容の要旨
II-3 Turn on the Hands-free Car Kit When the car kit is plugged to the cigarette lighter socket in your car and your car is on, the car kit will turn on automatically and try to auto reconnect the last connected mobile phone. A long tone indicates that the hands-free Car Kit has turned on. At the same time, blue LED will flash for a second. Blue LED will keep on flashing every 3 seconds. Note: The Car Kit can also be turned on manually by pressing and holding the “On/Off ” key for 2 seconds when
ページ9に含まれる内容の要旨
3 Pair the hands-free Car Kit with yourBluetooth Mobile Phone The blue LED of hands-free Car Kit will flash every 3 seconds indicating successful pairing. The phone may also ask whether you want to change the Car Kit's name. We recommend you should approve the name of “PBT70R ” and do not change it. Note: Make sure if pairing does not occur as expected, turn off the hands-free car kit and your phone, then wait for 10 seconds. Turn on them again and repeat from Step 1 to Step 3. II-5 Establish Bl
ページ10に含まれる内容の要旨
II-6 2-link operation and its LCD display status The Car Kit is able to connect to 2 mobile phones at the same time. Pair with the the first mobile phone (II3-4). Swith off the PBT70R, and then switch on again to enter into pairing mode(the Blue & Red LEDs will flash alternatively which indicates the Car Kit has entered into the pairing mode). Pair with the second mobile phone (II3-4). Connect to the first mobile phone (II-5). Connect to the second mobile phone(II-5). It will operate with the la
ページ11に含まれる内容の要旨
II-7 LCD display general status 7.1 On / Off and Pairing When the car kit is turned on and idle, the LCD displays “READY”. When the Car Kit is in pairing mode, the LCD screen displays “PAIRING”. While the car kit is connecting to the mobile phone, the LCD screen displays “CONNECTING”. After the car kit has connected to the mobile phone successfully, the LCD screen displays “CONNECTED”. When the car kit is being turned off, the LCD displays “OFF” with LED on for a few seconds. When the car kit is
ページ12に含まれる内容の要旨
7.2 Calling in When there is an incoming call, the LCD screen displays Caller ID if it is received or “RINGING”. OR RINGING Note: Some mobile phones may not display Caller ID via this LCD Display unit. When the call is answered, the LCD screen displays “ON LINE”. In case the call is rejected, it will go back to standby state and the LCD screen displays “CONNECTED”. 7.3 Calling out When there is an outgoing call from the mobile phone, the LCD screen displays “CALLING”. When the call is made succe
ページ13に含まれる内容の要旨
7.4 On Line When you are talking on line, the LCD screen displays “ON LINE”. Whenever the Volume Up key or Volume Down key is pressed, the LCD screen displays “ VOL” and the current volume setting for 2 seconds. If you mute the microphone, the mute icon will be turned on. And it stays on until you cancel it. When there is another call incoming while you are on line, the LCD screen will show Caller ID if it is received or “CALL WAITING”. Note: OR CALL WAITING 1. Some mobile phones may not display
ページ14に含まれる内容の要旨
II-8 Answer an Incoming Call When an incoming call is present, the hands-free Car Kit will ring. Press “On / Off ” key and you can answer the call. The blue LED will continue to flash once a second while the call is in session. II-9 Transfer Calls between this Hands-free Car Kit and your Bluetooth Phone When you are in session, calls can be transferred from your Bluetooth Phone to the hands-free Car Kit and vice versa. 1 FromBluetooth Phone to the Car Kit Press “On / Off ” key once, the call wil
ページ15に含まれる内容の要旨
II-11 Answer the call waiting During the active call in session if another call is coming, pressing “Volume Down” key for 2 seconds will make the mobile phone switch to the waiting call and place the active call on hold. Press “Volume Down” key for 2 seconds again, mobile phone will come back to the first active call. II-12 Mute the Microphone 1 Tomuteacall Press“ Volume Up” key for about 2 seconds and a beep tone will indicate the microphone is muted. A periodic reminder tone will be heard whil
ページ16に含まれる内容の要旨
II-17 Turn off the Hands-free Car Kit When the hands-free Car Kit is on, press and hold “On/Off ” key for 5 seconds. A long tone will indicate that the Car Kit starts to power off. LED continues to flash for a few seconds. At last LED will turn off and the Car Kit is powered off. II-18 Auto connection to theBluetooth Mobile Phone The Car Kit has already been paired with a Bluetooth mobile phone. If it is turned off and turned back on again, it will search for the last connected Bluetooth link. I
ページ17に含まれる内容の要旨
Note: BQB, CE and FCC approved The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. And any use of such marks by Sound Around Inc. is under license. Other trademarks and trade names are those of their respective owners. Bluetooth functions and operations may not be available or may vary depending on different mobile phones. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pur
ページ18に含まれる内容の要旨
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equip
ページ19に含まれる内容の要旨
() 封底内页
ページ20に含まれる内容の要旨
() 封底
