ページ6に含まれる内容の要旨
PiN 570 | User Manual 1. Introduction Thank you for purchasing the Navman PiN 570. Whether you travel in your own country or elsewhere, the PiN will direct you to your destination without the need for map-books and second- hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m (15 ft). Your PiN map provides street-level detail for door-to-door navigation, including Points of Interest (POIs) such as accommodation
ページ7に含まれる内容の要旨
PiN 570 | User Manual 2. PiN Features Your PiN 570 is designed to be easy to use. This chapter highlights the external features of your PiN: Front Components Component Description Flashing Green – Indicates the battery is charging. Charge Indicator Solid Green – Indicates the battery is fully charged and the unit is receiving external power. Flashing Red – Indicates low battery. Flashing Amber – Indicates the GPS receiver is turned on and is trying to Notification Indica
ページ8に含まれる内容の要旨
PiN 570 | User Manual Back Components Component Description GPS Receiver Receives signals from the GPS satellites overhead when lifted up to the horizontal position. External Antenna Connection socket for GPS external antenna (sold separately). Socket Protected by rubber cover. Speaker Outputs voice commands and warnings. Use the Up/Down Toggle to adjust volume. 8
ページ9に含まれる内容の要旨
PiN 570 | User Manual Left-Side Components Component Description Power Button Turns your Pocket PC on or off by pressing briefly. Turns the screen backlight on or off by pressing and holding. Rotate up or down to scroll through menus. Press to select Up/Down Toggle an option. Note: In SmartS, this is a zoom in/out toggle. 9
ページ10に含まれる内容の要旨
PiN 570 | User Manual Top Components Component Description Microphone Records messages. SD/MMC Slot Slot for SD (Secure Digital) or MMC (Multimedia Card) memory card - must be inserted with label facing front. Stylus (in slot; not Tap the stylus on the touch screen to select and enter information. shown) Store it in its slot when not in use. Headphone Socket Connection socket for headphones (sold separately). Bottom Components Component Description Soft
ページ11に含まれる内容の要旨
PiN 570 | User Manual Stylus The stylus is your input PiN. Store it in its slot when not in use. • Tap the screen with the stylus to select • Tap and drag the screen with the stylus to navigate the 2D Map and 3D Map screens. 11
ページ12に含まれる内容の要旨
PiN 570 | User Manual 3. Battery When fully charged, your PiN will operate for a varying length of time, depending on two main factors: (1) Whether the GPS receiver is turned on; (2) whether the backlight is set to on the default or high setting. Expected Battery-Life PiN Features Setup (hours) Default backlight without GPS 10.3-11.0 Default backlight with GPS 2.5-3.0 High backlight without GPS 4.0 High backlight with GPS 1.75 To change the GPS status, see GPS and GPS Signal
ページ13に含まれる内容の要旨
PiN 570 | User Manual Battery Power Status You can monitor battery power at the Power screen by tapping Settings System tab Power. Charging the Battery We strongly recommend that you fully charge your PiN before initial use. When the battery is charging, the Charge Indicator is flashing green. When the battery is fully charged and receiving external power, the Charge Indicator is non-flashing green. You may use the PiN while it is charging. Whenever possible, keep
ページ14に含まれる内容の要旨
PiN 570 | User Manual 4. GPS and GPS Signals GPS stands for “Global Positioning System”, which is a network of satellites that transmit accurate time and position information worldwide. GPS receivers receive signals from these satellites and use the information to determine an exact location. Satellites orbit the earth at approximately 20,200 km (12,000 miles). While a GPS receiver can detect signals from up to 12 satellites at any time, only three signals are needed to provide a posi
ページ15に含まれる内容の要旨
PiN 570 | User Manual 5. Microsoft ActiveSync Using Microsoft ActiveSync, you can synchronize the information on your computer with the information on your PiN. Synchronization compares the data on your PiN with your computer and updates both computers with the most recent information. NOTE: By default, ActiveSync does not automatically synchronize all types of information. Use ActiveSync options to turn synchronization on and off for specific information types. Use ActiveSync to: • K
ページ16に含まれる内容の要旨
PiN 570 | User Manual Installing ActiveSync on Your Computer 1. Turn on your computer and allow Microsoft Windows to start. 2. Insert the PiN Companion CD into the CD drive of your computer. The Getting Started with your Pocket PC window will open. 3. Click Getting Started With Windows Mobile or wait for the Getting Started With Your Windows Mobile™ based Pocket PC screen to appear. 4. Click Start Here. The Start Here screen will display. 5. Click Install ActiveSync in the left-hand
ページ17に含まれる内容の要旨
PiN 570 | User Manual 6. Memory Card Your PiN may come with a memory card containing a preactivated SmartS map of the region in which it was purchased. To navigate to your destination you will first need to insert the memory card into your PiN. Note: If your PiN did not come with a memory card, or if you are using a memory card other than the one that came with your PiN: To use SmartS, you must purchase a memory card separately. Then, you may install the required maps from the enc
ページ18に含まれる内容の要旨
PiN 570 | User Manual 7. Starting Your PiN 1. Check the Hard Reset switch on the bottom of the PiN. If this is in the left position, remove the stylus and use it to set it to the right and set up your PiN for use. 2. Press the Power button on the left side of the PiN The PiN will turn on. The first time you use your PiN, you will be prompted to set up your Pocket PC. On subsequent occasions, the Today screen will display. 3. Gently pull the bottom of the GPS receiver away
ページ19に含まれる内容の要旨
PiN 570 | User Manual 8. Positioning the PiN in a Vehicle Before you begin, determine whether your vehicle is fitted with a heat-reflecting or heated windscreen. If so, you will need to purchase an external antenna for your PiN to receive GPS signals. Read the Safety Notice on page 6 to ensure that the PiN does not obstruct the driver’s view, or interfere with the operation of vehicle airbags and safety devices. Installing the PiN in Your Vehicle First, check the Hard Reset on
ページ20に含まれる内容の要旨
PiN 570 | User Manual 6. Plug the small end of the In-Vehicle Power-Adaptor into the USB/Power Socket on the bottom of the PiN. 7. Plug the other end of the In-Vehicle Power-Adaptor into the vehicle power-socket. 8. Clean and dry the suction cup and the mounting-area on the windshield, then attach the suction-mount to the windshield: a) Hold the suction-cup firmly against the windshield; b) Press the lever towards the suction-cup. To remove the PDA windshield suction-mount
ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
PiN 570 | User Manual Contents Box Contents ............................................................................... 5 1. Introduction.............................................................................. 6 2. PiN Features ............................................................................ 7 3. Battery ................................................................................... 12 4. GPS and GPS Signals.......................................................
ページ4に含まれる内容の要旨
PiN 570 | User Manual 4
ページ5に含まれる内容の要旨
PiN 570 | User Manual Box Contents SmartS Application Installer CD including: • SmartS 2005 software, including SmartS Desktop Navman PiN 570 • User Manual (PDF format) ® ® and Adobe Reader • Map data One or more SmartS Map CDs Note: The number of disks varies with country of purchase. PiN Carry Case PiN Companion CD, including: ® ® • Microsoft ActiveSync • Outlook 2002 12V In-Vehicle Power PiN Suction-Mount Arm Adaptor with Power-Cab
