ページ1に含まれる内容の要旨
US / Canada Edition
iCN 600 series
TM
with Smart Version 3.0
User Manual
ページ2に含まれる内容の要旨
iCN 600 series | User Manual Contents 1. Introduction ............................................................ 3 2. iCN Features .......................................................... 4 3. Memory Card ......................................................... 6 4. Turning your iCN On and Off ................................. 7 5. Position in a Vehicle ............................................... 8 6. Main Menu Screen .............................................. 10 7. Screen Key
ページ3に含まれる内容の要旨
iCN 600 series | User Manual 1. Introduction Whether you travel in your own country, or overseas, the iCN will direct you to your destination without the need for map books and second-hand instructions. The Global Positioning System is available free of charge, at any time, and is accurate to within 5 m (15 ft). Your iCN map provides street level detail for door-to-door navigation, including Points Of Interest (POIs) such as accomodation, railway stations and airports. Use this guide to lea
ページ4に含まれる内容の要旨
iCN 600 series | User Manual 2. iCN Features It is recommended that you familiarize yourself with the basic operations of your iCN such as using the 8-way toggle and volume control. Front Components 2 3 4 1 5 6 7 8 Component Description 1 Screen Displays maps and menu options. 2 OK Select the highlighted menu option, text or command. Change the amount of map area shown, or press and hold to adjust the 3 Zoom/Brightness screen brightness. Cancels an action, deletes the last text character, retu
ページ5に含まれる内容の要旨
iCN 600 series | User Manual Back Components 2 3 4 1 5 6 Component Description 1 Speaker Outputs voice commands and warnings. Use Volume button to adjust. 2 Memory Card Slot Slot for memory card. Insert card with label facing the front of the iCN. 3 GPS Receiver Receives signals from GPS satellites when lifted out to the horizontal position. 4 Car Antenna Socket Connection socket for GPS car antenna (not included). 5 Power Socket Connection socket for power cable. 6 USB Socket Connection socket
ページ6に含まれる内容の要旨
iCN 600 series | User Manual 3. Memory Card iCN 635 Your iCN may come with an optional memory card containing a preactivated map. To navigate to your destination you will first need to insert the memory card into your iCN. Important: If your iCN did not come with a memory card, you will first need to purchase one separately then install the required map from the enclosed Map CDs using Smart Desktop. See Installing Maps Using Smart Desktop on page 32. To navigate in an area outside of the
ページ7に含まれる内容の要旨
iCN 600 series | User Manual 4. Turning your iCN On and Off Turn iCN On 1. Plug the power adapter into the socket on the left of the iCN and the other end into the vehicle lighter socket. 2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal position to allow it to obtain a GPS fix. 3. Press the Menu/Power button for one second. Turn iCN Off 1. Gently push the GPS receiver back towards the iCN. The receiver will click in to place. 2. Comple
ページ8に含まれる内容の要旨
iCN 600 series | User Manual 5. Position in a Vehicle Before you begin, check if your vehicle is fitted with a heat reflecting or heated windshield. If so, you will need to purchase an external antenna for your iCN to receive GPS signals. There are a number of ways to position an iCN in a vehicle. Follow these instructions carefully. • Do not install where it could cause interference with vehicle air bags. • For security and to avoid overheating, do not leave your iCN in an unattended vehicle, e
ページ9に含まれる内容の要旨
iCN 600 series | User Manual Option Two: Adhesive Tape and Screw Mount* You can use the base plate, adhesive tape and screws supplied to mount the iCN directly into the vehicle dashboard. Important: This is a permanent solution — the adhesive tape cannot be removed once fixed and the screws will leave holes in your dashboard. 1. Choose a position on the dashboard where the iCN will be clearly visible by the driver. Use the alcohol swab to ensure all surfaces are clean and dry. 2. Remove one of
ページ10に含まれる内容の要旨
iCN 600 series | User Manual 6. Main Menu Screen The Main Menu screen gives you access to all of the iCN’s functions, including navigating to a destination. 1. Press the MENU/Power button for about one second. 2. The Language screen will display. Use the 8-way toggle to highlight your language choice and press OK. • You can stop the Language screen displaying on startup by selecting the Do not show on startup check box. Press OK to confirm. 3. Press the Page button. 4. The Warning screen will di
ページ11に含まれる内容の要旨
iCN 600 series | User Manual 8. GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. This screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a North-pointing compass, the heading in degrees and ground speed. Satellites available are shown as segments. From the Main Menu, select Settings > More Settings > GPS Status. The GPS Status screen will display. • Yellow — a satellite
ページ12に含まれる内容の要旨
iCN 600 series | User Manual 9. Setting your Destination Before you travel, you must specify a destination. To a Street Address 1. From the Main Menu, select the Destination option. 2. From the Destination screen, select the Address option. The Destination-Address screen will display. 3. Select a Country using the 8-way toggle, press OK. 4. To select a Region or State press OK. Select a region. Press OK. 5. To select a Postcode or ZIP Code press OK. Select a postcode or ZIP code. Press OK. 6. T
ページ13に含まれる内容の要旨
iCN 600 series | User Manual 5. To select a Postcode or ZIP Code press OK. Select a postcode or ZIP code. Press OK. 6. To select a City/Town press OK. Select a city or town. Press OK. 7. To select the first intersecting street, press OK. A list of intersecting streets will display. Select a street. Press OK. 8. Select And. A list of intersecting streets will display. Select a street. Press OK. 9. Press the Page button, the Intersection-Details screen will display. 10. Choose one of the following
ページ14に含まれる内容の要旨
iCN 600 series | User Manual To a Point-Of-Interest (POI) A POI is a named site, feature, landmark or public venue. POI's are stored in Categories, such as parks and museums. POI's can be displayed as icons on a map. 1. From the Main Menu, select the Destination option.The Destination screen will display. 2. From the Destination screen, select the Points of Interest option. The Destination-POI screen will display. 3. Select a Category using the 8-way toggle, press OK 4. Select a Type, press OK
ページ15に含まれる内容の要旨
iCN 600 series | User Manual • Show — Displays the address on the Map screen • Go — Calculates the route and displays it on the Map or 3D Map screen. Multiple Destination Points with the Trip Planner You can use the Trip Planner to set multiple destination points for your trip. Your route will be calculated to go via each of these points in the specified order. Destination points can be added via the Trip Planner screen or by selecting Show Details from the pop-up menu on the Map screen, then A
ページ16に含まれる内容の要旨
iCN 600 series | User Manual Using the Map screen to Plan a Route You can plan a route directly from the Map screen using the Popup menu. 1. From the Main Menu, select the Map option. The Map screen will display. • Move round the Map screen using the 8-way toggle • Zoom using + and - on the Zoom/Brightness button. 2. Press OK to display cross-hair on the Map screen • To remove the cross-hair press ESC 3. Use the 8-way toggle to place the intersection of the cross-hair on a destination, the stree
ページ17に含まれる内容の要旨
iCN 600 series | User Manual 10. Avoiding an Area* You can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be active at any one time. Avoid Areas are displayed as shaded areas. If no alternative route exists, you will be routed through an Avoid Area. * iCN 635, 650 only Adding an Avoid Area 1. From the Main Menu, select the Map option. The Map screen will display. 2. Press OK and place the intersection of the cross-hair over the area that you want to avoid us
ページ18に含まれる内容の要旨
iCN 600 series | User Manual 11. Viewing Your Route Once a route has been calculated, there are a number of ways to view it. Cycle through the screens by pressing the Page button. To cancel a route or stop the Route Demonstrator, return to the Main Menu, select the Route Information option, then the Cancel Route option. ™ Back-On-Track Automatic Rerouting Your route is re-directed if you make a wrong turn. The ? symbol will display upper left of the 3D Map and Next Instruction screens while t
ページ19に含まれる内容の要旨
iCN 600 series | User Manual Next Turn Screen Displays the turn direction, street name and the distance to the next turn. A route must have been calculated for this screen to display. Access to this screen is set on the Settings - Display screen. 1. From the Main Menu, select the Map option The Map screen will display. 2. Press the Page button until the Next Turn screen displays. The next instruction Map of the next turn Direction of the next turn Additional information can be displayed Distan
ページ20に含まれる内容の要旨
iCN 600 series | User Manual Route Information The Route Information screen provides information about your current route, and lets you skip a trip destination point or cancel a route. The screen is only available from the Main Menu when you are navigating a route. Show Route Select to display your entire route on the Map screen. Instruction List Select to display the Instruction List screen. The Instruction List screen is similar to the Next Four Turns screen except that it displays your enti
