ページ1に含まれる内容の要旨
Important Safety
Instructions
，
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
ページ2に含まれる内容の要旨
Important Safety Instructions NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a damp cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat
ページ3に含まれる内容の要旨
Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. Use the unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of directi
ページ4に含まれる内容の要旨
Important Safety Instructions Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
ページ5に含まれる内容の要旨
Accessories Accessories List ITEM NAME QTY Owner’s Manual 2 AC Adaptor 1 Car Adaptor 1 Mounting Bracket 1 USB Cable 1 Mounting cradle 1 Touch Pen 1 Dashboard mount disk 1 SD Card 1 Pouch 1 NOTE Accessories and their part number are subject to modification without prior notice due to improvements. 5
ページ6に含まれる内容の要旨
Contents …………………………………..……..…..1 Important Safety Instructions ……………………………….……….…....5 Accessories ……………………………….………..…...7 View of Main Unit ………………………………..…………....8 System Connections ……………………………….…….….….10 Power Supply Preparation …………………………….……….….….12 General Setup ……………………………….……….…..16 MP3 Player …………………………….……………...18 Photo Viewer ……………………………….……….…..20 Use of the Mount Accessories ……………………………….……….…..21 Troubleshooting ………
ページ7に含まれる内容の要旨
View of Main Unit 1. POWER Button Press for a longer time to enter or exit the standby mode. 2. Card Port Insert the SD card into the slot. 3. Earphone Jack Connect earphone for private listening. When the earphone is connected to this jack, the speaker will be turned off automatically. 4. USB Port Connect to the supplied adapter to charge the unit. Used to connect to the USB device. 5. LCD Screen Finger touches the screen directly or use the touch p
ページ8に含まれる内容の要旨
System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port which allows you to connect the unit to PC for map updating. See the below figure for details: System requirements: -Windows 98SE, ME, 2000 and XP (Driver required for Windows 98SE) -D
ページ9に含まれる内容の要旨
System Connections Inserting SD Card The unit is designed with SD Card jack which allows you to insert the SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. The card unlocks and protrudes slightly. Then remove the card. Connecting to Earphones Connect the earphones to the right side of the unit for private listening. When earphone is connected, the speakers will automatically turn
ページ10に含まれる内容の要旨
Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering it and charging its battery. 1. Connect AC adaptor to the right side of the unit in the USB port, as shown on the right. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. Note: Turn unit's power off before unplugging. In the case of using the adaptor, the LCD screen will be brighter than with the rechargeable battery. Using of C
ページ11に含まれる内容の要旨
Power Supply Preparation About Rechargeable Battery Your portable GPS device comes with a built-in rechargeable battery. Charge the battery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery delivers about 2.5 hours of use. Working conditions and precautions for the rechargeable battery New batteries should be fully charged before initial use. Battery should only be used and charged when temperatures are between 32 °-100 °F. Maint
ページ12に含まれる内容の要旨
General Setup System Main Menu When in navigation mode, Tap MENU button, and then choose SETTINGS. In the SETTINGS menu, tap EXIT, a confirmation message appears. Tap Exit in the confirmation message to return to the system main menu, as shown below. In the main menu, there are four items for selecting. Touch the corresponding item to enter. Tap to enter navigation mode; tap to enter the MP3 player; tap to enter the Photo Viewer; tap to enter th
ページ13に含まれる内容の要旨
General Setup Language Tap in the settings menu to enter Language settings menu for language selecting, as shown below: Tap the buttons to select language. Then tap to confirm or tap to cancel. Backlight Tap in the settings menu to enter Backlight settings menu for backlight adjusting, as shown below: Tap the first group buttons to adjust the backlight level. Tap the second group buttons to adjust the sleep time. There are 6 choices for sl
ページ14に含まれる内容の要旨
General Setup Date & Time Tap in the settings menu to enter Date & Time settings menu for changing to the current time zone, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date and tap the buttons of Time group to change the corresponding time. Tap to return. Power Tap in the settings menu to enter Power menu for the current battery status, as shown below: The power m
ページ15に含まれる内容の要旨
General Setup Screen Tap in the settings menu, the screen will display as below: This item is used to calibrate the sensitivity of the touch screen. Tap the center of “+” as it moves around the screen. If you touch the center of “+” every time, it will disappear after having moved through a cycle (center →top left corner →bottom left corner →bottom right corner →top right corner). Tap the screen to return to the settings menu. Note: If “+” doesn’t disappear, you s
ページ16に含まれる内容の要旨
Playing Music The unit is designed with SD card slot. You can insert the SD card with MP3 and WMA files. It supports MP3, WMA format files playback. Note: Do not store MP3 and WMA format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. Warning: For your own safety, do not use the earphones when driving. Take the following steps to play: Loading MP3 and WMA form
ページ17に含まれる内容の要旨
Playing Music When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. In the play list, double tap the songs to start playback. Tap ; when the button changes to orange, the player will repeat all the songs in the play list. Tap ; when the button changes to orange, the player will play the s
ページ18に含まれる内容の要旨
Photo Viewer The unit is designed with SD card slot. You can insert the SD card with JPEG files. It supports JPEG format files playback. Note: Do not store JPEG format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. It lags when reading high-resolution JPEG files in SD Card. We suggest low-resolution (within 640*480) pictures playback. Playing JPEG Files Insert
ページ19に含まれる内容の要旨
Photo Viewer If the pictures list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. Tap to return to previous menu. Tap a picture to select it and tap to confirm your selection. In the pictures list, double tap a picture to play it on screen, as shown below. On the playback screen, the Photo Viewer has following playback features: Tap to rotate the picture. Tap to back to previous pi
ページ20に含まれる内容の要旨
Use of the Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: 1. See Fig. 1 to slide the mount cradle onto the end of the mount bracket. 2. See Fig. 2. Set the bottom edge of the unit onto the mount cradle. Then push the tap at the top of the mount cradle in arrow 1 direction to mount the
