ページ1に含まれる内容の要旨
Pub. 988-0151-521
www.lowrance.com
®
GlobalMap 7200C,
®
GlobalMap 7300C HD,
®
GlobalMap 8200C,
®
GlobalMap 8300C HD,
®
GlobalMap 9200C,
®
GlobalMap 9300C HD,
Mapping GPS Receivers
Operation Instructions
ページ2に含まれる内容の要旨
Copyright © 2006 Lowrance Electronics, Inc. All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. ® Lowrance is a registered trademark of Lowrance Electronics, Inc. MapCreate ™, FreedomMaps ™, and NauticPaths ™ are trademarks of ® LEI. Fishing Hot Spots is a registered trademark of
ページ3に含まれる内容の要旨
Table of Contents Section 1: Read Me First! ......................................................... 1 How Lowrance GPS Works........................................................... 3 Introduction to GPS and WAAS................................................... 4 How to use this manual: typographical conventions .................. 7 Section 2: Installation & Accessories.................................... 9 Preparations ................................................................
ページ4に含まれる内容の要旨
Navigate a Trail (forward)...................................................... 53 Navigate a Back Trail (backtrack, or reverse) ...................... 55 Transfer Custom Maps and GPS Data Files............................. 56 Save GPS Data to Hard Drive.................................................... 58 Cancel Navigation....................................................................... 59 Section 4: Advanced GPS Operations................................. 61 Find Distance to Ano
ページ5に含まれる内容の要旨
Coordinate System Selection...................................................... 76 Map Fix ........................................................................................ 78 Customize Page Displays............................................................ 79 GPS Simulator............................................................................. 80 Simulating Trail or Route Navigation................................... 81 Initialize GPS .......................................
ページ6に含まれる内容の要旨
Units of Measure ....................................................................... 108 Section 6: Searching............................................................. 109 Find Addresses .......................................................................... 110 Find Any Item Selected by Map Cursor .................................. 112 Find Interstate Highway Exits ................................................ 113 Find Map Places or Points of Interest (POI) ..................
ページ7に含まれる内容の要旨
WARNING! A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. CAUTION When showing navigation data to a position (waypoint), a GPS unit will show the shortest, most direct path to the waypoint. It provides navigation data to the waypoint regardless of obstructions. Therefore, the prudent navigator will not only take advantage of all available navigation tools when traveling to a way- point, but will also visually check to make sure a
ページ8に含まれる内容の要旨
Notes vi
ページ9に含まれる内容の要旨
Section 1: Read Me First! How this manual can get you out on the road, fast! Welcome to the exciting world of GPS satellite navigation! We know you're anxious to begin finding your way with this space-age technol- ® ogy, but we have a favor to ask. Before you grab the GlobalMap and begin installing it, please give us a moment or two to explain how our manual can help you get the best performance from your high- resolution, high-performance GPS+WAAS chart recorder. First, we want to thank y
ページ10に含まれる内容の要旨
Section 3 contains short, easy-to-scan GPS lessons that follow one an- other in chronological order. They're all you'll need to know to find your way on the water or in the wilderness quickly. After you've learned the basics (or if you already have some GPS ex- perience), you may want to try out some of the GlobalMap's many ad- vanced navigation features. That brings us to Section 4, Advanced GPS Operations. This section contains the rest of the unit's GPS command functions, organized in alp
ページ11に含まれる内容の要旨
How Lowrance GPS Works You'll navigate faster and easier if you understand how the GlobalMap scans the sky to tell you where you are on the earth — and, where you're going (But if you already have a working understanding of GPS receivers and the GPS navigation system, skip on ahead to Section 2, Installation & Accessories on page 9. If you're new to GPS, read on, and you can later impress your friends with your new-found knowledge.). First, think of your unit as a small but powerful compu
ページ12に含まれる内容の要旨
Think of this data storage like the hard drive memory in a computer or a tape in a cassette tape recorder. You can save several different GPS data files, erase 'em and record new ones, over and over again. Like any com- puter file, these GPS Data Files (file format *.usr) can be shared be- tween Lowrance GPS or sonar/GPS units or even personal computers. This GlobalMap has one more thing in common with a personal com- puter. Just as computers have a floppy disk drive for storing and ex- chang
ページ13に含まれる内容の要旨
9, so you can mount your GlobalMap and plug in the power. Or you might want to see how our text formatting makes the manual tutorials easy to skim. If that's the case, move on to "How to Use This Manual" on page 7. But, if you want to understand the current state of satellite navigation, look over this segment describing how GPS and its new companion WAAS work together to get you where you're going. The Global Positioning System (GPS) was launched July 17, 1995 by the United States Depart
ページ14に含まれる内容の要旨
Remember, the unit must have a clear view of the satellites in order to receive their signals. Unlike radio or television signals, GPS works at very high frequencies. These signals can be easily blocked by trees, buildings, an automobile roof, even your body. Like most GPS receivers, this unit doesn’t have a compass or any other navigation aid built inside. It relies solely on the signals from the satel- lites to calculate a position. Speed, direction of travel, and distance are all calcul
ページ15に含まれる内容の要旨
How to use this manual: typographical conventions Many instructions are listed as numbered steps. The keypad and arrow "keystrokes" appear as boldface type. So, if you're in a real hurry (or just need a reminder), you can skim the instructions and pick out what menu command to use by finding the boldface command text. The fol- lowing paragraphs explain how to interpret the text formatting for those commands and other instructions: Arrow Keys The arrow keys control the movement of dotted c
ページ16に含まれる内容の要旨
press and hold) the down arrow key to scroll down the menu and select (highlight) the My Trails menu command. Finally, press the Enter key." Step 2 would mean: "Press the down arrow key repeatedly to scroll to the trail named Trail 1, and press Enter. Next, press the right arrow key and then the down arrow key to highlight the Navigate command, then press Enter." NOTE: There are slight differences in menu structure among the Global- Map models covered in this manual. The differences are m
ページ17に含まれる内容の要旨
Section 2: Installation & Accessories Preparations You can install the GPS system in some other order if you prefer, but we recommend this installation sequence: Caution: You should read over this entire installation section before drill- ing any holes in your vehicle or vessel! 1. Determine the approximate location for the GPS unit, so you can plan how and where to route the cables for the antenna and power. This will help you make sure you have enough cable length for the de- sired co
ページ18に含まれる内容の要旨
You need to select an antenna installation location that has a clear, un- obstructed view of the sky. After the module is installed, connect it to the unit. The LGC-3000 can communicate with your GPS unit either directly ® (using the supplied extension cable) or through a NMEA 2000 network. NOTE: See the module’s instruction sheet, publication part number 988- 0154-651, for complete installation instructions. In an automobile, you may achieve good results by simply placing the external a
ページ19に含まれる内容の要旨
NOTE: There are two basic power connection options, which are shown in the following two diagrams. Read the following instructions carefully to determine which power connection applies to your unit. De- pending on your configuration, you may not use all of these wires. Caution: All of the wires in the power/data cable have bare ends for eas- ier installation. The bare ends on any unused wires could cause an electrical short if left exposed. To prevent this, you should cover the individual
ページ20に含まれる内容の要旨
this unit could be damaged to a point that it is irreparable and could even cause harm to the user when not properly fused. Failure to use a 3-amp fuse will void your warranty. If possible, keep the power cable away from other boat wiring, especially the engine's wires. This will provide the best isolation from electrical noise. If the cable is not long enough, splice #18 gauge wire onto it. The display power cable has two wires, red and black. Red is the positive (+) lead, black is negat
