ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
HI-406BT Bluetooth GPS receiver with Digital Compass 1
ページ3に含まれる内容の要旨
Table of Contents ........................................... 3 1.1 Overview 1.2 Main Features ..................................... 5 2.1 Setting up: Bluetooth GPS receiver ........ 6 2.2 Setting up: Digital Compass ................. 12 3. Dimensions .......................................... 14 4. Packaging .............................. 15 4.1 Standard Packaging 4.2 Optional Packaging ............................... 17 ............................. 20 5. System Specifications 6. Ge
ページ4に含まれる内容の要旨
1.1 Overview Introduction HI-406BT-C is a GPS (Global Positioning System) receiver in wireless Bluetooth interface with build- in active antenna and extra digital compass functions. With HI-406BT-C, your mobile devices, such as, Smartphone, PocketPC, laptopPC, tabletPC, etc. can receive GPS data wirelessly and perform the GPS applications, such as, car navigation, personal navigation, route planning, tracking, etc. Equipped with the most powerful and ultra high sensitive SiRF Star
ページ5に含まれる内容の要旨
4
ページ6に含まれる内容の要旨
1.2 Main Features: • 20 Channels "All- In-View" Tracking • P osition accuracy of 10 meters 2D RMS • Cold/W arm/Hot Start Time: 42/38/1 Seconds (Signal Strength > 30 dB-HZ) • R eacquisition Time: 0.1 seconds • Support Standard NMEA -0183 at 38400 bps baud rate (Defined by customer 4800 up to 57600) • Support P ower Saving Mode • Compatible with Bluetooth devices with Serial Port Profile (SPP) • Build-in digital compass with 12 LED indications • Superior Sensitivit y for Urban Canyon and Fo
ページ7に含まれる内容の要旨
2.1 Setting up: Bluetooth GPS receiver STEP 1: Open the battery cap and put the battery (406-BTT) into the battery compartment. Push down and pull out 6
ページ8に含まれる内容の要旨
STEP 2 Connect the inclusive AC charger to home electronics outlet or connect the inclusive DC charger to the car cigarette lighter. As soon as they connected, the solid amber light on the right side in front of HI-406BT-C will turned on (stay on) meaning the battery charging. AC charger to home electronic outlet DC charger to car cigarette lighter (DC 12V~24V) Mini-1394 MMCX external autenna plug female connector for power in and GPS signal out 7
ページ9に含まれる内容の要旨
STEP 3 As soon as the battery fully charged, the amber light will turned off, then, up-plug the charger. Indicator for power charging and GPS status Indicator for battery low (Red) and Bluetooth status (Blue 8
ページ10に含まれる内容の要旨
STEP 4 There is one of each switch on both side of HI-406BT- C. The switch on the right side is for Bluetooth GPS receiver. The switch on the left side is for digital compass. As soon as turn on the switch on the right side, the GPS receiver will start to function and search the satellites. Meanwhile, the LED indicator on the right side in front of HI-406BT-C will turned green (stay on - the GPS receiver not get 3D fixed yet) Please make sure place the HI-406BT-C outdoor open space so that
ページ11に含まれる内容の要旨
Bluetooth GPS Switch LED indicator Status color Amber HI-406BT-C battery charging LED off HI-406BT-C battery fully charged Green (blinking) GPS in 3D fixed Green (Stay on) GPS searching more satellite and not in 3D fixed yet Blue (blinking) Bluetooth searching host device Blue (stay on) Bluetooth paired and connected Red HI-406BT-C battery low 10
ページ12に含まれる内容の要旨
STEP 5: As soon as turn on the switch on the right side, the Bluetooth will also start to function and searching. The blue light on the left side in front of HI-406BT-C will turned on (Blinking) meaning the Bluetooth is searching the host device and not get paired yet. Please consult the Bluetooth step by step connection guide from this manual on section . The pin code is " 0000 " when asked the pin code. After the Bluetooth paired and connected, the blue light will stay on. STEP 6: Ope
ページ13に含まれる内容の要旨
2.2 Setting up: Digital Compass As soon as turn on the switch on the left side, the digital compass will start to function and indicating the north (LED on red) and the south (LED on green) based on the earth magnetic field. Since the HI-406BT-C equipped with 2-axiel digital compass chip, please make sure place the HI-406BT-C on horizontal surfaced and no grater than 30 degree angle. The digital compass or the Bluetooth GPS receiver can work independently or work simultaneously. Even the
ページ14に含まれる内容の要旨
13
ページ15に含まれる内容の要旨
3. Dimensions Unit: mm Top View Button View 64.80 46.40 Side View Front View Back View 24.00 14
ページ16に含まれる内容の要旨
4. Packaging 4.1 Standard Packaging: Model Name model# 1. Bluetooth GPS receiver HI-406BT-C with digital compass 2. Rechargeable Li-Polymer 406-BBT 3.7V 1100 mAh battery 3. Mini1394 to USB cable 401-USB 4. AC power adaptor with USB-ACC USB female plug 5. Cigarette lighter adaptor USB-DCC with USB female plug 6. Carrying pouch BAG-002 7. HI-406BT-C user manual MAU-406 8. Mini CD CDR-01 1 2 15
ページ17に含まれる内容の要旨
3 6 4 7 5 8 16
ページ18に含まれる内容の要旨
4.2 Optional Packaging: Model Name model# 1. MMCX external antenna ANT-MMC 2. mini-1394 to PS/II connecting cable PS2-1394 ANT-MMC PS2-1394 17
ページ19に含まれる内容の要旨
MMCX antenna Under blocking area, the external antenna can extend the signal reception from HI-406BT-C PS2-1394 By connecting to different optional connecting cables, HI-406BT-C can be a wired PS/II GPS receivr and used with all kinds of mobile devices. 18
ページ20に含まれる内容の要旨
HI-406BT-C as a GPS mouse By counecting different optional counecting cables, HI-406BT-C can be all kinds of wired GPS receiver solutions. 19
