ページ1に含まれる内容の要旨
GPSMAP 400 series
owner’s manual
ページ2に含まれる内容の要旨
© 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin (Europe) Ltd. Garmin Corporation st nd 1200 East 151 Street, Liberty House No. 68, Jangshu 2 Road, Olathe, Kansas 66062, USA Hounsdown Business Park, Shijr, Taipei County, Taiwan Tel. (913) 397.8200 or (800) 800.1020 Southampton, Hampshire, SO40 9RB UK Tel. 886/2.2642.9199 Fax (913) 397.8282 Tel. +44 (0) 870.8501241 (outside the UK) Fax 886/2.2642.9099 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 All rig
ページ3に含まれる内容の要旨
IntroductIon IIntroduct on This manual includes information for the following products: ® GPSMAP 420/420s Quick Links ® GPSMAP 430/430s/430x/430sx ® GPSMAP 440/440s/440x/440sx • Turning the Unit On or Off: page 2. ® GPSMAP 450/450s • Acquiring GPS Satellite Signals: page 4. • Inserting and Removing SD Cards: page 5. Tips and Shortcuts • Restoring Factory Settings: page 5. • Press HOME from any screen to return to the Home screen. • Using the Navigation Chart: page 7. • Press MENU from any of
ページ4に含まれる内容の要旨
IntroductIon Using Fishing Charts ............................................................ 13 t able of c ontents Enabling High Resolution Satellite Imagery ....................... 14 Viewing Aerial Photos ........................................................... 15 Introduction ...........................................................................i Viewing Current Station Information ................................... 16 Tips and Shortcuts ...........................................
ページ5に含まれる内容の要旨
IntroductIon Configuring the Unit ..........................................................29 Appendix ............................................................................53 Configuring System Settings ............................................... 29 Specifications ........................................................................ 53 Changing Units of Measure .................................................. 29 Product Registration ..............................................
ページ6に含まれる内容の要旨
IntroductIon Warnings Failure to avoid the following potentially hazardous situations could • Use the electronic chart in the unit only to facilitate, not to replace, result in an accident or collision resulting in death or serious injury. the use of authorized government charts. Official government charts and notices to mariners contain all information needed to navigate • When navigating, carefully compare information displayed on safely. the unit to all available navigation sources, inclu
ページ7に含まれる内容の要旨
GettIG n Stedart GettInG s artedt Unit Overview MARK SELECT HOME MENU Power/data External GPS GXM 3 antenna SD card slot antenna GPSMAP 440sx Shown ® GPSMAP 400 Series Owner’s Manual
ページ8に含まれる内容の要旨
GettIG n Stedart Turning the Unit On or Off Adjusting the Backlight 1. Pressand release the POWERkey . Press and hold the POWER key until the unit beeps and the Garmin screen appears. When the Warning screen appears, press 2. Select Light. SELECT to open the Home screen. NOTE: The first time you power on your unit, you must go through a setup sequence. See page 51 for details. Press left or right on the ROCKER to manually adjust the backlight. ® GPSMAP 400 Series Owner
ページ9に含まれる内容の要旨
GettIG n Stedart To switch between Day and Night mode: Using the Keypad 1. Pressand release the POWERkey . POWER/ 2. Select Day/Night Mode. BACKLIGHT 3. Press leftor righton the ROCKER to switch between modes. RANGE (-/+) ROCKER MARK MARK SELECT SELECT HOME MENU MENU HOME POWER/BACKLIGHT—Press andhold toturn the unit on or off; press and releaseto adjust the backlightand Day/Night modes. RANGE (-/+)—Press toadjust the rangeof thesonar; zoom
ページ10に含まれる内容の要旨
GettInG Stedart Acquiring GPS Satellite Signals Using Simulator Mode When you turn on the unit, the GPS receiver must collect satellite Simulator Mode turns the GPS receiver off for use indoors or for data and establish its current location. If the unit cannot establish a practice. The unit does not track satellites in Simulator Mode. location, the Initialize Position screen appears. CAUTION: Do not try to navigate using Simulator Mode because the GPS receiver is turned off. Any satellite sig
ページ11に含まれる内容の要旨
GettInG Stedart Restoring Factory Settings Inserting and Removing SD Cards You can restore your unit to the original factory settings. Your unit supports Secure Digital (SD) cards. Insert optional ® ™ BlueChart g2 Vision SD cards to view high-resolution satellite CAUTION: This procedure deletes any information you have imagery, and aerial reference photos of ports, harbors, marinas, and entered. other points of interest. Insert blank SD cards to transfer data such as waypoints, routes, a
ページ12に含まれる内容の要旨
GettInG Stedart • Charts—access Navigation, Fishing, Mariner’s Eye 3D, and Understanding the Home Screen Fish Eye 3D charts (page 7). Use the Home screen to access all other screens. NOTE: On the GPSMAP 420/420s, 440/440s/440x/440sx ® ™ NOTE: Options on this screen vary based on the unit type. units, you must insert an optional BlueChart g2 Vision preprogrammed SD card to access the Fishing and Fish Eye 3D charts. NOTE: The GPSMAP 430/430s/430x/430sx units do not need additional cards to
ページ13に含まれる内容の要旨
u SInG c S thar Using the Navigation Chart u Is nG c harts Use the navigation chart to plan your course, view map information, Your unit has a worldwide imagery map, a built-in detailed map and as a navigational aid. of US inland lakes, or BlueChart g2 cartography for either the US shoreline or a specific country . NOTE: If using a GPSMAP 420/420s, you must insert an optional BlueChart g2 Vision preprogrammed SD card for your • Navigation Chart—displays all relevant navigation data region
ページ14に含まれる内容の要旨
u SInG c S thar NEXRAD—turn NEXRAD weather data on or off. Navigation Chart Settings To access additional settings or options for the navigation chart, NOTE: You must plug the optional GXM 31 antenna into the press MENU. XM port on the back of the unit and have a subscription to XM WX Satellite Weather to view NEXRAD data. XM is only Full Screen Map (Show Numbers) —view the navigation or fishing available on the GPSMAP 430x/430sx/440x/440sx units. For chart in full-screen mode, without nu
ページ15に含まれる内容の要旨
u SInG c tS har Understanding Chart Data Panning the Navigation Chart Use the map pointer ( ) to pan away from your current location, BlueChart g2 Vision and the US inland lake electronic charts use graphic symbols to denote map features. Some common symbols and scroll to other areas on the navigation chart. As you pan past you might see include, but are not limited to, the following*: the edge of the current map display, the screen scrolls forward to provide continuous map coverage. The po
ページ16に含まれる内容の要旨
u SIG n c S thar 2. Selectthe item.If more than one item is inthe area, select Zooming In and Out on the Map Review, andthen select the item. The Range (+/-) keys control the zoom level, indicated by the scale at the bottom of the navigation chart ( ). The bar under the number represents that distance on the map. Accessing Additional Object Information Use the map pointer ( ) to view information about on-screen map items and waypoints. To access additional object
ページ17に含まれる内容の要旨
u SInG c S thar Viewing Tide Station Information Using BlueChart g2 Vision Tide station information appears on the chart with a detailed icon Optional BlueChart g2 Vision preprogrammed SD cards allow showing the relevant tide level. You can view an in-depth graph you to get the most out of your unit. In addition to detailed marine for a tide station to help predict the tide level at different times or charting, BlueChart g2 Vision has the following features: different days. • Mariner’s Eye
ページ18に含まれる内容の要旨
u SIG n c S thar Mariner’s Eye 3D Settings Using Mariner’s Eye 3D To access additional settings or options from the Mariner’s Eye 3D Mariner’s Eye 3D provides a bird’s eye view from above and behind screen, press MENU. the boat (according to your course), and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, Colors—choose between Normal bridges, or channels, and is beneficial when trying to identify entry (Default), Water Hazard, and and exit rou
ページ19に含まれる内容の要旨
u SIG n c S thar Using Fish Eye 3D Using Fishing Charts Using the depth contour lines of the BlueChart g2 Vision Use the fishing chart for a cartography, Fish Eye 3D provides an underwater view of the sea detailed, unobstructed view of floor or lake bottom. the bottom contours and depth soundings on the chart. Fish Eye 3D Settings The fishing chart uses detailed To access additional settings bathymetric data on the or options for the Fish Eye 3D, BlueChart g2 Vision SD card, screen, pr
ページ20に含まれる内容の要旨
u SIG n c S thar Enabling High Resolution Satellite Imagery You can overlay high-resolution satellite images on the land, sea, or both portions of the navigation chart when using a preprogrammed BlueChart g2 Vision SD card. NOTE: This feature is preloaded on the GPSMAP 430/430s/430x/430sx units. To enable satellite imagery: 1. While viewing the Navigation Chart, press MENU. 2. Select Chart Setup > Appearance > Photos. 3. Selectone of the followingoptions: Photo Overlay Off
