Mitsubishi N 402880の取扱説明書

ページ1に含まれる内容の要旨

INSTALLATION INSTRUCTIONS
STILLEN HI-FLOW INTAKE
95-97 Mitsubishi Eclipse Turbo / Eagle Talon Turbo
P/N 402880
Materials supplied:
1. (1) K&N filter
2. (1) Hi-Flow adapter
3. (1) Bracket, support
!
4. (7) Bolts (6 x 1.0 x 25mm)
5. (7) Flat washers 6mm
WARNING:
6. (7) Lock washers 6mm
IF YOU ARE NOT EXPERIENCED IN THE AREA OF
Equipment needed:
AUTOMOTIVE MECHANICS WE STRONGLY URGE THAT
1. Assorted sockets and wrenches
YOU REFER THIS INSTALLATION TO YOUR MECHANIC.
2. +,- Screwdriver
3. Assorted p

ページ2に含まれる内容の要旨

c. The bracket should be attached with the bend in the bracket towards the front of the Hi-Flow adapter. 5. Install the Hi-Flow assembly. a. Insert the airflow sensor into its original intake tube. b. Align the bracket to two of the threaded holes originally used to secure the lower housing. c. Tighten the hose clamp and the bracket mounting bolts. d. Re-connect the sensor to the harness. Note: Once the MAS connector is disconnected, do not start vehicle, Check Engine Light will go on and will n