ページ1に含まれる内容の要旨
Use and CareGuide
®
LiquidPropaneGasGrill
Kenmore Model No.415.16127800
Kmart Item No. 640-810984-112
This Grill is For
Outdoor Use Only
• Read this manual before cooking on
grill. Failure to follow all
manufacturer's instructions could
result in fire or explosion which could
cause property damage, personal
injury or death.
• Combustion by=products produced
when using this product contain
• Parts • Use and Care
chemicals known to the State of
California to cause cancer, birth
• Assembly • Troubl
ページ2に含まれる内容の要旨
CALIFORNIA PROPOSITION65 if you smell gas: 1. Combustion by-products producedwhen using this product contain chemicals known to the State of 1. Shut off gas to the appliance. California to cause cancer, birth defects, and other reproductive harm. 2. Extinguish any open flame. 2. This product contains chemicals, including lead 3. Open lid. and lead compounds, known to the State of 4. if odor continues, keep away from the California to cause cancer, birth defects or other appliance and immediately
ページ3に含まれる内容の要旨
For Your Safety ...................................... 2 KENMORE GRILL WARRANTY Grill Service Center................................... 2 Product Record Information ............................ 2 One Year Full Warranty on Kenmore Grill If this grill fails due to a defect in material or workmanship Safety Symbols ...................................... 2 within one year from the date of purchase, call 1-800-4-MY- Installation Safety Precautions .......................... 2 HOME®to arrange for free
ページ4に含まれる内容の要旨
LP Tank The LP tank used with your grill must meet the following requirements: Use LP tanks only with these required measurements: 12" (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) capacity maximum. LP tanks must be constructed and marked in accordance with * NEVER store a spare LP tank under or near grill or in specifications for LP tank of the U.S. Department of Transportation (DOT). See LP tank collar for marking. enclosed areas ............ * LP tank valve must have: , Type
ページ5に含まれる内容の要旨
LP Tank Exchange Connecting Regulator To The LP Tank o Many retailers that sell grills offer you the option of replacing 1. LP tank must be properly secured onto grill. (Refer to assembly section.) your empty LPtank through an exchange service. Useonly those reputable exchange companies that inspect, precision fill, 2. Turn all control knobs to the OFF position. test and certify their cylinders. Exchange your tank only for an OPB safety feature-equipped tank as described in the 3. Turn LP tank O
ページ6に含まれる内容の要旨
Leak Testing Valves, Hose and Regulator 1. Turn all grill controlknobs to OFF. , Be sure regulator is tightly connected to LP tank. 3. Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding by calling Sears for replacement parts at 1-800-4-MY-HOME®. Hold coupling nutand regulator 4. Brush soapy solution onto areas where bubbles are shown in as shown for pro
ページ7に含まれる内容の要旨
Safety Tips ,A. Before opening LP tank valve, check the coupling nut for tightness. For Safe Use Of Your Grill And To Avoid Serious A When grill is not in use, turn offall control knobs and LP tank injury: valve. • Do not let children operate or play near grill. A Never move grill while in operation or still hot. • Keep grill area clear and free from materials that burn. A Use long-handled barbecue utensils and oven mitts to avoid • Do not block holes in bottom or back of grill. burns and splatt
ページ8に含まれる内容の要旨
Before Your First Cookout Main Burner ignitor Lighting A Do not lean over grill while lighting. , Light burners, check to make sure they are lit, close the lid and 1. Open lid during lighting. warm up grill on HIGH for 15 minutes. This curing of paint and 2. Turn ON valve from source or tank. parts will produce an odor only on first lighting. 3. Push and turn Ignition Burner control knob to_. Hi and Burner Flame Check immediately press and hold Electronic Ignition button. o Light burner, rotate
ページ9に含まれる内容の要旨
, Plastic parts: Wash with warm soapy water and wipe dry. Cleaning the Burner Assembly ,A. Do not use citrisol, abrasive cleaners, degreasers or a Follow these instructions to clean and/or replace parts of burner concentrated grill cleaner on plastic parts. Damage to and assembly or if you have trouble igniting grill. failure of parts can result. 1. Turn gas off at control knobs and LP cylinder. • Porcelain grates: Because of glass-like composition, most 2. Remove cooking grates and heat tents.
ページ10に含まれる内容の要旨
Storing Your Grill Indirect Cooking Poultry and large cuts of meat cook slowly to perfection on the • Clean cooking grates. grill by indirect heat. The heat from selected burners circulates • Store in dry location. gently throughout the grill, cooking meat or poultry without the • When LP tank is connected to grill, store outdoors in well- touch of a direct flame. This method greatly reduces flare-ups ventilated space and out of reach of children. when cooking extra fatty cuts because there is n
ページ11に含まれる内容の要旨
Description Part# Description Part # 1 1 40 1 RightLegAssembly.................. 80015595 SideburnerClip ...................... 80008653 2 1 41 1 SideburnerLid....................... 80015648 LeftLegAssembly.................... 80009041 3 1 MatchHolder ........................ 80004320 42 1 SideburnerHandle ................... 80009043 4 1 TankExclusionWire .................. 80008616 43 2 HingeAssemblies.................... 80009045 5 1 BottomShelf........................ 80009035 44 2 #10-24X3
ページ12に含まれる内容の要旨
@ @ \ ® @ ® @ ° ®, ® \ @ @ ® \ @ /'! © ¢/ I L_. ® @ ® @ @ @ ® 12 • 464310808•464310608
ページ13に含まれる内容の要旨
Placelegsas shown(A).Leftlegassemblyhas largeaxle holeson endsof legs.Hooktankexclusionwire intorightandleft leg Tank Exclusion Wire assemblies(B). A TankExclusionWire MatchHolder RightLegAssembly LeftLe_ / / 464310608• 464310808• 13
ページ14に含まれる内容の要旨
Bottom Shelf to Legs Placebottomshelfendwithcutout holefor LPcylinderbetweenlegswithaxleholes.Attachto rightandleftlegassemblieswith (4) 1/4-20x1-1/2"screws and1/4-20flange nuts, Tightensecurely. 8 1/4-20FlangeNuts Qty:4 7 1/4-20xl-1/2"Screws Qty:4 ! | BottomShelf 14 °464310808°464310608
ページ15に含まれる内容の要旨
WheelsandLegExtenders to Cart Turnassemblyupsidedown. Insertaxlerodthroughwheel,wheelspacer,legs,wheelspacerandotherwheel.Attachwith(1)8mmflatwasherandhitchpin. Hammerlegextendersinto rightlegs. 14 12 HitchPin WheelSpacer Qty:l 13 Qty: 2 8mmFlatWasher Qty:l LegExtenders \ Wheel 14 13 \ 12 \ Axle Rod \ "Cone" side of wheelagainst leg 464310608. 464310808* 15
ページ16に含まれる内容の要旨
Front Panels Standcart upright. Attachlowerfront panelto lowerhalfof cartwith(4)#8x318"self-tapscrews. Slideslot in upperpanelontotankexclusionwire andattachto upperhalfof cartwith(4)#8x3/8" self-tap screws. !" 17 #8x3/8" self-tapscrews Qty:8 LowerFrontPanel UpperFrontPanel \ 16. 464310808.464310608
ページ17に含まれる内容の要旨
Grill Headto Cart Thissteprequirestwopeopleto liftandpositiongrillheadontocart. Carefullylowerthegrill headontothe cart.Makesure the regulatorhoseis hangingoutsidethe cart.Attachwith(4) 1/4-20x1/2"screws, 7ram lock washers and7ramflat washers, 31 32 33 7mmlockwashers 7mmflatwashers 1/4-20x1/2" screws Qty:4 Qty:4 Qty:4 GrillHead X 464310608• 464310808° 17
ページ18に含まれる内容の要旨
Right SideShelf Hooksidewallof shelfoversupportbracketson sideof firebox(A). Insert(2)7ramfiber washers and1/4-20x1/2"screws throughinsidefrontd firebox and(2) throughoutsidebackof fireboxfor eachsideas shown(B). Attachshelfwith (4)1/4-20flange nuts (C), B 36 31 A RightSideShelf 31 36 8 1/4-20xl/2"screws 7mmFiberWasher 1/4-20FlangeNut Qty:4 Qty:4 Qty:4 FasciaRight Side Shelf Attachfasciaandsideshelftofireboxwith (1)#8x3/8" self- tap screw. Tightenupside shelfto fireboxwithanother(1)#8x3/8" self-
ページ19に含まれる内容の要旨
Sideburner Shelf and Left Fascia Hooksidewall of sideburnershelfoversupportbracketsonside of firebox(A). Insert(2)7ramfiber washers and1/4-20x1/2"screws throughinsidefrontof fireboxand (2)throughoutsidebackof fireboxfor eachsideas shown(B), Attachsideburner shelfwith(4) 1/4-20flange nuts (C), Attachfasciato fireboxwith(1)#8x3/8" self-tap screw (D). Tightenupsideburnersideshelftofireboxwithanother(1)#8x3/8"self-tap screw betweenmountingbracketandfascia (D). CAUTION:Fascia'smustbesecurelytightened
ページ20に含まれる内容の要旨
Sideburner Bezel,Sideburner, SideburnerKnob and ignitorWire. Positionvalvebehindfasciaand lineupholes. Insert(1)of the #8-32x3/8"stainlesssteelscrews,do notfullytighten. Slipbezelunderscrewinsertedandpositionas shown(A). Lineupotherholeandinsertscrew#8-32x3/8"throughbezeland intovalve. Tightenbothsecurely. Placesideburnerintoshelf. Makesurevalveis insidesidebumertube.Attachsideburnerwith(2)#8-32x3/8"screwsto the drippan as shown(B). Under sidebumershelf, install burnerclip to sideburnertube and
