Land Pride TREKER 4200/4400 NT/STの取扱説明書

ページ1に含まれる内容の要旨

Trailer, Fifth Wheel
Assembly Instructions
Manual No. 701-154M
Treker 4200/4400 NT/ST and 4210/4410 ST Series
Before You Start
Assembly Instructions
A detailed listing of parts for this accessory kit is provided
When you see this symbol, the subsequent
on page 4. Use the list as a checklist to inventory parts
instructions and warnings are serious - follow
!
received. Please contact your local Land Pride dealer for
without exception. Your life and the lives of
any missing hardware.
others depend

ページ2に含まれる内容の要旨

Land Pride Assembly Instructions Must Pivot At These two Points Two Machine Bushings (# 18) 3. Place the Pivot Tube (#3) between the front support rails as shown in the picture above and attach using one of the 3/8" x 2-1/4" Bolts (#12) and Nylock Locknuts provided. Tighten fully and then back off turn or just until the Pivot Tube (#3) can rotate inside the support rails. 4. Install one of the 3/8" 2-1/2" Lock Pins (#8) in the rear hole of the Pivot Tube (#3) as shown and then attach the Trailer

ページ3に含まれる内容の要旨

Land Pride Assembly Instructions 5. The hitch comes already assembled. Mount the Hitch (#1) in the manner that will position the trailer pin hole at 11 inches or more from the ground. Note: On most machines the hitch will be mounted as shown above. 6. Make sure the Hitch (#1) is straight in line with the center of the Machine. First tighten the 3/4" x 2" Bolt (#14) just enough to take out the free play. Then tighten the 5/16" Eyebolt (#9) until it actually begins to draw the Hitch (#1) into the

ページ4に含まれる内容の要旨

Land Pride Listing of Parts Kit No. 701-034A BACK SCREEN NT Item Part No. Part Description Qty 1 PTL102 HITCH 1 2 PTL103 TRAILER TONGUE 1 3 PTL104 PIVOT TUBE 1 4 PTL105 TRAILER BED 1 5 PTL106 BED EXTENSION 1 6 PTL107 TAIL GATE 1 7 805-212C PIN WIRE SNAP LOCK 3/8 X 2 1/2 2 8 EB516WD 5/16" EYE BOLT WELDED 1 9 804-010C WASHER FLAT 5/16 USS PLT 1 10 802-131C HHCS 5/16-18X3 GR5 4 11 802-114C HHCS 3/8-16X2 1/2 GR5 2 12 SP34-14 5/16"X3/4"X1/4" NYLON SPACER 4 13 802-064C HHCS 3/4-10X2 GR5 1 14 804-025C