ページ1に含まれる内容の要旨
Use & Care Guide
Liquid Propane Gas (LPG) Grill
Kenmore Model Number: 119.16312800
KmartItem Number: 640-787678-119
• Safety
• Assembly
• Use and Care
• Cooking Guide
• Espa_ol, Pg. 30
• Parts and Service
Failure to comply with these instructions could
Call us first if you have any problem with this
result in a fire or explosion that could cause
product. We can help you with questions about
serious bodily injury, death or property damage.
assembly and grill operation or if there are
damaged or m
ページ2に含まれる内容の要旨
Primary Safety Warnings ................................... 1-3 IF YOU SHELL GAS: Warranty Information ............................................ 2 Pre-Assembly Instructions .................................... 3 Shut off gas to the appliance. Part Diagram and Lists ...................................... 4-9 Extinguish any open flame. Assembly Instructions .................................... 10-18 Open lid. Use & Care Instructions ................................. 19-27 If odor continues, kee
ページ3に含まれる内容の要旨
DONOT lightthisgrillwithoutfirstreading Theinstallation mustconform withlocalcodes or, theLighting Instructions. inthe absence of local codes, with either the DONOT lightthisgrillwithoutchecking the National Fuel Gas Code, ANSI Z223.1/NFPA 54, burner tubesforblockage thatcouldhave or CAN/CGA B149.1, Natural Gas and Propane occurred duringshipment. SeetheCleaning Installation Code, or Propane Storage and andMaintenance Instructions. Handling Code, B149.2. All electrical accessories (such as a rot
ページ4に含まれる内容の要旨
PART# PART DESCRIPTION QTY PURPOSE OF PART SB0064 Phillips Head Bolt,M6x35mm 4PCS Attaches Cabinet Front Crossbar Install Casters, Attaches Firebox Assembly, Side SB0027 Phillips Head Bolt,M6xl6mm 24PCS Burner Assembly and Side Shelf Assembly Attach the Firebox Assembly to the Cabinet FEOI05 M6xl.OT Plastic Washer 4PCS Assembly There are 8 Washers used with some Phillips head SBO005 Lock Washer, M6 8PCS bolts Attaches the Door Top Brackets to the Cabinet Assembly, Attaches Side Burner Control Pa
ページ5に含まれる内容の要旨
Plastic Washer M6xl.0T Phillips Head Bolt M6x35mm Qty: 4 Qty: 4 Part # SB0064 Part # FE0105 "S"- Hook qty: 3 Part # SE0123D-002 © Lock Washer M6 Qty: 8 PhillipsHead Bolt M6x16mm Part # SB0005 Qty : 24 Part# SB0027 Battery Size: AA Qty: 1 © Part # SE0007 Lock Washer M4 Phillips Head Bolt M4x8mm Qty: 14 qty: 22 Part # SB0016 Part # SB0085 Cotter Pin Qty: 2 Part # SE9049D-001 Washer M4 qty: 4 Part # SB0114 Door Top Brackets (L/R) Qty: 2 Part# B06WIB-6-C5 Cabinet Door Stop Qty: 1 Part# B06W1B-6-C7 P
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
KEY DESCRIPTION PART# QTY A Hood Assembly AI Hood Left Side Panel CAOO44-L 1 A2 Hood Right Side Panel CA0044-R 1 A3 Thermometer Seat CA0045D-002 1 A4 Thermometer SE0076 1 A5 Hood Bolt B06W1B-6-A5 2 A6 Hood Handle Seat - Right B06W1B-6-A6 1 A7 Hood Handle Seat- Left B06WIB-6-A7 1 A8 Hood Handle Heat Insulator FE0010 2 A9 Silicon Stopper FE0001M 4 A10 Hood Outer Panel B06WIB-28-A10 1 All Hood Inner Panel B06WIB-28-All 1 A12 Hood Handle B06W1B-28-A12 1 B Firebox Assembly B1 Firebox Rear Upper Panel
ページ8に含まれる内容の要旨
KEY DESCRIPTION PART# QTY B19 Main Burner Electrode B06W1B-6-B10 4 B20 Firebox Bottom Panel B06WlB-28-B20 1 B21 Grease Tray SA0647-3 1 B22 Cotter Pin SE9049D-001 2 B23 Grease Cup Bracket SE0147 1 B24 Grease Cup SA0375 1 B25 Firebox Front Panel B06W1B-28-B25 1 B26 Firebox Front Heat Shield B06W1B-6-B17 1 B27 Gas Manifold Assembly SC0046 1 B28 Main Burner Control Panel B06W1B-28-B28 1 B29 Main Burner Control Knob Seat B06WlB-6-B20 4 B30 Back Burner Control Knob Seat B06WlB-28-B30 1 B31 Main Burner
ページ9に含まれる内容の要旨
KEY DESCRIPTION PART# QTY C15 Cabinet Door Handle B06W1B-6-C15 2 C16 Manual Igniter Stick SE0159D-001 1 C17 Condiment Basket SE9027 1 C18 Locking Standard Caster B06W1B-6-C18 1 C19 Standard Caster B06W1B-6-C19 1 C20 Locking Swivel Caster B06W1B-6-C20 1 C21 Swivel Caster B06W1B-6-C21 1 D Side Burner Assembly D1 Side Burner Cover Pin B06WIB-6-D1 1 D2 Side Burner Cover SA0390 1 D3 Side Burner Rack SE0084 1 D4 Side Burner Stopper SB0045D-001 2 D5 Side Burner Inner Frame B06WIB-6-D5 1 D6 Towel Bar Ha
ページ10に含まれる内容の要旨
H Remove Firebox from Cabinet [] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet. Remove the crossbar, [] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from cabinet. [] Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox. Crossbar Install Control Knobs and Casters [] Push the Main Burner Control Knobs and Back Burner Control Knob onto the valve stems. See Inset 1. Th
ページ11に含まれる内容の要旨
Install Cabinet Front Crossbar and Door Top Brackets [] Attach the Cabinet Front Crossbar to the Cabinet using 4 Phillips Head Bolts (M6x35mm) and 4 Lock Washers (M6), [] Attach Door Top Brackets labeled L and R to the Cabinet using 4 Phillips Head Bolts (M4x8mm). Phillips Head Bolt: M6x35mm Qty: 4 Phillips Head Bolt M4x8mm qty : 4 © Lock Washer M6 Qty: 4 Door Top Brackets (L/R) Qty: 2 Attach Doors to Cabinet [] Push down on top hinge pin to insert the Left and Right Doors into the cabinet. See
ページ12に含まれる内容の要旨
Hang Condiment Basket and attach Cabinet Door Stop [] Hang Condiment Basket on the inside of cabinet Right Door, See Inset 1. [] Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm), See Inset 2. Inset 1 Phillips Head Bolt M4x8mm qty: 2 \IIIII Cabinet Door Stop qty: 1 Inset 2 Install Grease Tray [] Insert the Grease Tray along two sides of the Firebox from the back underneath the firebox. ]2
ページ13に含まれる内容の要旨
AttachFireboxto Cabinet [] Place the firebox onto the cabinet frame with regulator hose and side burner ignition wire hanging inside of the cabinet, We recommend using 2 people to lift the firebox. [] Line up the holes and attach the firebox to the cabinet frame using 4 Phillips Head Bolts (M6x16mm) and 4 Washers (M6x!.0T). Hint: You may need to slide the Firebox Assembly forward, backward, or lift slightly for the bolt holes to properly line up. Phillips Head Bolt M6x16mm Qty: 4 Plastic Washer
ページ14に含まれる内容の要旨
Install Towel Bar Handles, Utensil Hooks, Side Panels [] Use 2 Phillips Head Bolts (M4X8mm), 2 Lock Washers (M4), and 2 Washers (M4) to attach a Towel Bar to the side burner frame. Use 3 Phillips Head Bolts (M4X8mm) and 3 Lock Washers (M4) to attach the Side Burner Control Panel to the side burner frame. See Insets 1 and 2. [] Slide 3 Utensil Hooks into the second Towel Bar and use 2 Phillips Head Bolts (M4X8mm), and 2 Lock Washers (M4), and 2 Washers (M4) to attach the Towel Bar to the side she
ページ15に含まれる内容の要旨
Install Side Burner Valve [] Detach side burner ignition wire from the regulator hose if they are taped together. [] Insert the side burner valve stem up through the hole in the Side Burner Control Panel. See Inset 1. [] Center the side burner valve in the side burner tube, See Inset 2. [] Secure the side burner valve stem to the Side Burner Control Panel using 2 Phillips Head Bolts (M4x8mm). See Inset 3. Inset 3 Phillips Head Bolt N4x8mm qty: 2 Inset [nset 1 Attach Side Burner Control Panel to
ページ16に含まれる内容の要旨
_1_ Attach Side Burner Control Knob and Side Burner Ignition Wire [] Slide the side burner ignition wire through the hole located in the lower left front corner of the Firebox Assembly and over the side burner igniter connector. See Insets 1 and 2. [] Push the Control Knob onto the valve stem. See Inset 3. Inset 3 r Side Burner Control Knob qty: 1 Inset 2 Inset 1 Install Side Shelf Frame to Firebox [] Unscrew the 2 Phillips Head bolts ¼" from the upper left and right corner holes in the right si
ページ17に含まれる内容の要旨
Install the Heat Diffuser, Cooking Grates, Warming Rack [] Place the Heat Diffuser into the firebox between the ridges in the front and back panels. See Inset 1. [] Place the Cooking Grates into the firebox. The grate bottoms have a small knob on each corner. See Inset 2. [] Insert the Warming Rack into the holes of firebox side panels as shown, See Inset 3. Inset 3 Inset 2 Inset i I_ Place and Secure LP Cylinder into the Cabinet [] Hook the ends of the Cylinder Support Ring into the two holes i
ページ18に含まれる内容の要旨
Install Battery [] Unscrew the electronic igniter cap. Place the "AA" Battery into the igniter with the positive (+) end up. Screw the electronic igniter cap back into place. Battery (Size AA) qty: 1 Congratulations - Assembly is now complete! [] Remove any additional labels or packing material from the grill except the CSA label. Be sure to clean all foam packing material out of all areas. [] Please proceed to and read the remaining sections of the Use & Care Guide prior to hooking up your LP c
ページ19に含まれる内容の要旨
CORRECT LP GAS TANK USE • Use of alcohol or drugs may impair the ability • LP gas grill models are designed for use with a to assemble and operate the appliance. standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) • Keep a fire extinguisher readily accessible. In tank, which is not included with the grill. Never the event of an oil or grease fire, do not attempt connect your gas grill to an LP gas tank that exceeds to extinguish with water. Use a Type B extinguisher this capacity. A tank of appro
ページ20に含まれる内容の要旨
Regulator and LP Cylinder Connections Notes about LP Gas Tank Exchange Programs • Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your tank only for The gas pressure regulator provided with this an OPD safety feature equipped tank as described outdoor cooking appliance must be used. This in the LP gas tank section o
