ページ1に含まれる内容の要旨
Outdoor Grilling Pr o ducts
MODEL: CGG-240
Roll-Away Portable LP Gas Grill
ASSEMBLY AND OPERATING INSTRUCTIONS
m WARNING: FOR OUTDOOR USE ONLY
m This instruction manual contains important information necessary for the
proper assembly and safe use of the appliance
m Read and follow all warnings and instructions before
assembling and using the appliance
m Follow all warnings and instructions when using the appliance
m Keep this manual for future reference
Note to installer: Leav
ページ2に含まれる内容の要旨
1. Warnings and Safety Instructions y Instructions Table of Contents If these instructions are ignored, there is a possibility of a hazardous fire or explosion which could result in physical injury or property damage! It is your responsibility to assemble, operate and maintain your gas grill properly. 1. Warnings and Safety Instructions 3 READ ALL WARNINGS AND INSTRUCTIONS PRIOR TO ASSEMBLING AND 2. Illustrated Parts List 4 OPERATING YOUR GRILL WARNINGS: 3. Exploded View 5 m This grill
ページ3に含まれる内容の要旨
2. Illustrated Parts List 3. Exploded View A. Grill Body 1 pc B. Flame Tamer 1 pc C. Grill Grate 1 pc D. Drip Tray 1 pc E. Grill Body Connector Pins 2 pcs F. Connector Pin Cotter Pins 2 pcs Lid Rubber Pad Left Up Tube Assembly 1 15 30 G. Wheel 2 pcs Flame Tamer Left Leg Assembly Drip Tray 2 16 31 Cooking Grate M6X15 Screw Hook 3 17 32 H. Axle Bolt 2 pcs Thermometer Leg Spring Grill Body Connector Pin 4 18 33 Thermometer Bezel Right Leg Tube Connector Pin Cotter Pin 5 19 34 Burner Assembly Bottom
ページ4に含まれる内容の要旨
4. Assembly Instructions Step 3: Remove all contents from packaging and make sure all parts are present before attempting to Leg Assembly assemble. Part numbers reference the tables on pages 4 and 5. Remove Grill Grate (Part C) • Complete cart assembly by inserting Bottom Leg Connector (Part K) and Flame Tamer (Part B) from inside the grill. into Cart Leg Assembly (Part J) as shown. Repeat for both sides of Cart Leg Assembly. Step 1: • Be certain to insert Bottom Leg Connectors so that th
ページ5に含まれる内容の要旨
4. Assembly Instructions (cont.) Step 5: Side Tables Handle • Hide-away side shelves are designed to Step 4: Assembly provide sturdy table space when the grill Grill Body Assembly is in use. • Make sure wheels and leg assembly • Be certain that the side tables are locked are stable and will not slide. into place as shown when placing items • Angle Grill Body (Part A) so Locking on the side tables. Bar rests under Handle Assembly. • The shelves slide inwar d for easy storage Locki
ページ6に含まれる内容の要旨
Step 5: Steps for Folding and Transport (cont.) • Lock Left and Right Secur - ing Latches to the Lock Posts located behind the grill. Step 3: • Stablize grill by placing foot on right side Bottom Leg Assembly Cr ossbar (Part L). • Grab Right Side Handle and car efully lift Grill Body in upward motion so Locking Bar disengages from Handle Assembly. Right Side Handle To return grill to Cooking Position, reverse above steps: • Unlock Left and Right Securing Latches. • Grab right side handl
ページ7に含まれる内容の要旨
5.4 Checking for gas leak 5. Operating Your Grill (cont.) 4. Inspect the solution at the connections, looking for bubbles. If no bubbles appear, the connection is secure. m DANGER 5.2 Special Instructions for the Use of Regulator and Propane Cylinder 5. If bubbles appear, a leak is detected. Go to step 6. Check gas system for leaks to prevent fire or explosion A propane gas cylinder is required for operation. Use • If the grill is not in use, the control knob must be turned 6. Disconnect
ページ8に含まれる内容の要旨
5. Operating Your Grill (cont.) 6. Care And Maintenance (cont.) 6.3 Cleaning And Maintenance 5.6 Match lighting WARNING: Do not clean any grill surface while grill is operating. Let grill cool to a safe temperature prior to cleaning. IMPORTANT! • Disconnect the fuel supply and remove the fuel supply cylinder prior to cleaning. A match lighting hole is located on the left side of the firebox. • Cleaning should be done where detergent won’t harm work surface or lawn. Exterior Cleaning Match ligh
ページ9に含まれる内容の要旨
BURNER WON’T LIGHT (USING 20LB. TANK WITH CONVERSION HOSE) • Review all steps in LP bottle section above • Ensure that LP tank supply valve is open (turned counterclockwise until stop) • Ensure that the orifices at both ends of the conversion hose are not obstructed or damaged. • Straighten sharp kinks in conversion hose GRILL DOESN’T REACH HIGH ENOUGH TEMPERATURE (USING LP BOTTLE) • Be sure LP bottle still has fuel in it by gently shaking it - there will be sounds of liquid inside if fuel rem
