ページ1に含まれる内容の要旨
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH Р УССКИЙ
PN-E471
PN-E421
LCD MONITOR
MONITEUR LCD
MONITOR LCD
LCD FARBMONITOR
ЖК МОНИТОР
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
BEDIENUNGSANLEITUNG
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
ENGLISH ..... E1
香港電器安全規格
FRANÇAIS .... F1
（國際電工委員會規格適合）
ESPAÑOL .... S1
DEUTSCH .... D1
Р УССКИЙ ..... Р1
( )
.ﺔﻘﻓﺮﳌﺍ CD-ROM ﺔﻧﺍﻮﻄﺳﺃ ﰲ ﺪﺟﻮﻳ ﺔﻴﺑﺮﻌﻟﺍ ﺔﻐﻠﻟﺎﺑ ﻞﻴﻟﺪﻟﺍ
ページ2に含まれる内容の要旨
IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifyi
ページ3に含まれる内容の要旨
ENGLISH PN-E471 PN-E421 LCD MONITOR ENGLISH IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT WARNING: EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the CAUTION user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may RISK OF ELECTRIC be of sufficient magnitude to constitute a risk of SHOCK electric shock to persons. DO NOT OPEN The e
ページ4に含まれる内容の要旨
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a c
ページ5に含まれる内容の要旨
ENGLISH IMPORTANT INFORMATION (Continued) The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the
ページ6に含まれる内容の要旨
SAFETY PRECAUTIONS (Continued) 14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on t he product or when objects have fallen into the product. c. When the product has been e xposed to rain or water . d. When the product does not operate properly as described
ページ7に含まれる内容の要旨
ENGLISH TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with The Power Cord the application of high precision technology. However, there - Do not damage the power cord nor place heavy objects on may be minute points on the screen where pixels never light it, stretch it or over bend it. Also, do not add extension cords. or are permanently lit. Also, if the screen is viewed from Damage to the cord may result in fire or electric shock. an acute angle the
ページ8に含まれる内容の要旨
MOUNTING PRECAUTIONS • Since the monitor is heavy , consult your dealer before • If it is dif ficult to provide suf ficient space for any reason installing, removing or moving the monitor. such as the installation of the monitor inside a housing, or • When installin g, removing or moving the monitor , ensure if the ambient temperature may be outside of the range that this is carried out by at least 2 people. of 32°F (0°C) to 104°F (40°C), install a fan or take oth
ページ9に含まれる内容の要旨
ENGLISH Contents IMPORTANT INFORMATION ............................................1 Removing the Handles ..................................................10 DEAR SHARP CUSTOMER ..............................................3 Affixing the Stand Hole Protection Covers .................11 SAFETY PRECAUTIONS ..................................................3 Preparing the Remote Control Unit ..............................11 TIPS AND SAFETY INSTRUCTIONS ...............................5 Installing
ページ10に含まれる内容の要旨
Connecting Peripheral Equipment When the PN-ZB01 (optional) 1 2 3 4 5 is attached 6 14 12 13 71 9 0 5 11 8 Caution Connection with a PC or AV equipment • Be sure to turn of f the main power switch and disconnect 1. PC/AV HDMI input terminal the plug from the power outlet before connecting/ • Use a commercially available HDMI cable (conforming to disconnecting cables. Also, read the manual of the the HDMI standard) for PC/AV HDMI input terminal. equipment to be connected. • Set HDMI of I
ページ11に含まれる内容の要旨
ENGLISH Connecting Peripheral Equipment 14. PC/AV DVI-D output terminal Connection when the PN-ZB01 • The video of the PC/A V DVI-D input can be output to an (optional) is attached external device. • Outputting HDCP-encrypted v ideo requires an external The PN-ZB01 expansion board (optional) allows the use of device which supports HDCP. additional connection terminals. • This terminal allows the daisy chain connection of up to 5 6. PC/AV DVI-D input terminal monitors. • Set DVI of
ページ12に含まれる内容の要旨
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3 3. Plug the power cord (supplied) into the AC power outlet. Main power switch For power outlet 2 1 AC input terminal Power cord (Supplied) Binding Cables [PN-E471] The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Insert the cable clamp
ページ13に含まれる内容の要旨
ENGLISH Affixing the Stand Hole Protection Covers After installing the monitor , affix the stand hole protection covers as necessary. 1. Peel of f the backing sheet and affix the cover on the monitor. Preparing the Remote Control Unit Installing the batteries Remote control operation range 1. Press the cover gently and slide it in the direction of the The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ arrow. bottom
ページ14に含まれる内容の要旨
Turning Power On/Off Caution TIPS • T urn on the monitor first before turning on the PC or • If the monitor is in the input sig nal standby mode and you playback device. press the POWER button on the remote control unit, the monitor enters standby mode. • Y ou can turn on/of f the monitor by pressing the power Turning on the main power switch on the front panel of the monitor. • Setting the SCHEDULE flashe s the power LED alternately in red and orange in standby mode. nDate/time settin
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Printed in China Imprimé en Chine Impreso en China Gedruckt in China Отпе ча т ано в Кит ае 0NY42M184305B(1) Q41G42M1843 5B
