ページ1に含まれる内容の要旨
OWNER'S MANUAL If SAN SU
37" WIDE TFT LCD TELEVISION
WITH DIGITAL TUNER
LC 700
H rrll
DiGiTAL
:>o > )
:sooo
oooo
:>}oo
_m ATTENTION 7
If you purchase a universal remote control from your local retailer, please contact the remote |
When shipped from the factory, the TV/CABLE menu option is set to the "CABLE" (Cable Television)
i mode, If not using Cable TV, set TWCABLE this menu option MODE to theSELECTION "TV" position, 1
f
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBE
ページ2に含まれる内容の要旨
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous A cAo,,o. /k A voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an SHOCK, DO NOT REMOVE COVER equilateral triangle is intended to alert the user to the presence of important (OR BACK). NO USER-SERVICEABLE operating and m
ページ3に含まれる内容の要旨
I NT SAFETY I STRUCTI 1 Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or
ページ4に含まれる内容の要旨
! PORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSl/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit
ページ5に含まれる内容の要旨
! PORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the player is expo
ページ6に含まれる内容の要旨
Contents j PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ....................................... 3 SAFETY PRECAUTIONS ............................................................. 5 Contents ........................................................................................ 6 Features ........................................................................................ 7 Power source ................................................................................ 7 Parts and functions .....
ページ7に含まれる内容の要旨
Features • Integrated Digital Tuner - You can view digital broadcasting without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • ProgrammableTV Sleep Timer - Operable from the remote control, the LCD TV can be program
ページ8に含まれる内容の要旨
Parts and functions Front ReBr POWER -- AC power cord socket indicator Remote sensor Left side Right side COAXIAL DIGITAL AUDIO OUT jack AVl IN jacks RF (ANT) IN jacks AV2 IN j', PC IN jacks PC/HDMI CHANNEL AUIDIO IN jacks _,_ A!V buttons HDMI IN jacks :_VOLUME +/- buttons -- MENU button button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL ,_.!V buttons and VOLUME +/- buttons can be used to select the desired setting during the menu screen operati
ページ9に含まれる内容の要旨
Remote control 7. MENU Button = Use to display the On-Screen menu function. 8. MUTE Button =To turn off the sound, press this button once. The LCD TV will be silenced and the 8 symbol "MUTE" will appear on the screen. The 9 muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) 10 + or - buttons. 9. DISPLAY Button - When the TV is receiving an 4 11 analog signal pressing this button will display the current information on-screen. When the TV is 12 5 receiving
ページ10に含まれる内容の要旨
Antenna connections Ifyou are using an indoor or outdoor antenna, followthe instructions belowthat correspond to your antenna system, if you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. If your combination VHF/UHF antenna has a 300 Antenna Antenna ohm twin-lead wire, the use of the 300-75 ohm jack jack matching trans
ページ11に含まれる内容の要旨
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE -_ For basic Cable TV service not requiring a Converter/ Descrambler box, connect the 75 ohm Coaxial Cable
ページ12に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio int
ページ13に含まれる内容の要旨
Connections to other equipment To connect the LCD TV to a DVD player/Satellite receiver If your DVDplayer or Satellite receiver has a S-Video out jack, connect cords as shown. Left side of the LCD TV To S-VIDEO IN 1 ©___m--- _ S-Video cord (not supplied) _ @ @ _ Audio cord (not supplied) ©©© To AUDIO IN 1 To S-Video OUT © -c;¢ , ,.... To Audio OUT To connect the LCD TV to a DVD player with component video If your DVD player has component video out jacks, connect your LCD TV to a DVD player using
ページ14に含まれる内容の要旨
Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo- nent video cord. Left side of the LCD TV To AUDIO IN 2 _©©--_-_ To Audio OUT Audio cord (not supplied) I (.r@ 000 o 1 I Video cord (not supplied) PR To Component OUT To connect the LCD TV to a HDIVll or a DVI device The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompress
ページ15に含まれる内容の要旨
Connections to other equipment Using an AV Amplifier with built-in digital surround if you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built=in Dolby Digital decoder, or etc. as shown below. Left side of the LCDTV Front Speaker / Coaxial Digital Audio Output Subwoofer (Right) ,v I / © @@@ ! @@@ -- Coaxial digital cable (not supplied) To Coaxial
ページ16に含まれる内容の要旨
Connections to other equipment To connect the LCD TV to a Game The LCD TV can also be used as a TV device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information. Left of the LCD TV To AUDIO/VIDEO IN 1 (or 2) I I TVGAME @© ©/ [ °°i +o,,udio,Video ou,- ? _"O_'_ A-_'_o
ページ17に含まれる内容の要旨
Setting the language You can choose from three different 1 Press MENU. The menu screen will appear. languages (English, French and Spanish) for the on=screen displays. 2 Press 4 or _ to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE _ABLE AUTO CH MEMORY ADD/DELETE V _kV :SELECT _" :ADJUST Press A or V to select "LANGUAGE". SETUP ADD/DELETE V &V :SELECT "_ :ADJUST Press _ or I_ to select the desired language: English (ENGLISH), French (FRAN(_AIS) or Spanish (ESPANOL). Press EXiT to return t
ページ18に含まれる内容の要旨
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. To use this TV with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. TV/CABLE selection Press MENU. The menu screen will appear. 2 Press 41or _ to select (SETUP) menu.
ページ19に含まれる内容の要旨
Memorizing channels Automatic memory tuning 1 Press MENU. The menu screen will appear. 2 Press 4 or t_ to select _ (SETUP) menu, then press s SETUP or t to select "AUTO CH LANGUAGE ENGLISH MEMORY". TV/CABLE CABLE ADD/DELETE A_" :SELECT _1_ :ADJUST Press _ or I_.The TV will begin memorizing all the channels AUTO CH MEMORY available in your area. \\ / / PROGRAMMING NOW PLEASE WAIT // / X _ CABLE It may take from 15 minutes to m 30 minutes to complete memorizing digital cable ........... channels.
ページ20に含まれる内容の要旨
TV operation 1 To turn on the TV, press POWER. 2 Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. 3 Set the TV/CABLE menu option to the appropriate position (see page 23). 4 Press the Direct Channel Selection (0=9,-) buttons to select the channel. ANT ABCD TO SELECT ANALOG CHANNELS CABLE ANALOG 1 2 1-9: Press 0 t
