ページ1に含まれる内容の要旨
R
5 TON LONG FRAME JACK
94641
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
©
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
ページ2に含まれる内容の要旨
Specifications Lifting Capacity 5 Tons (10,000 Lbs.) Minimum Saddle Height 5.5” Maximum Saddle Height 22.5” Handle Length 38” Overall Dimensions 56” L x 15” W x 6” H Hydraulic Fluid Capacity 0.9 Quarts Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and
ページ3に含まれる内容の要旨
9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. The handle must be kept clean, dry, and free from oil and grease at all times. 10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 11. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform it
ページ4に含まれる内容の要旨
Specific Jack Safety Precautions Warning!! Stand clear of the Jack when raising or lowering a vehicle. 1. Jack Capacity. Never exceed the Jack’s capacity of 10,000 Lbs. (5 Tons). Check the vehicle’s owner’s manual to determine the actual gross weight of your vehicle before attempting to lift it. 2. Never ride on the Jack. Never ride on the Jack, and never have people or pets in the vehicle you are raising. 3. Only use Jack to raise vehicle. After raising the vehicle, use
ページ5に含まれる内容の要旨
Operation Raising the Vehicle. 1. Position the Jack so that the Saddle (7.1) is at one of the recommended lifting points. Pull back on the Screw Rod (1.4) and turn it to the right (see label on handle) to lock the release valve. Pump the Handle (1.5) or the Foot Pedal (2.1) until the Saddle (7.1) fully engages the lifting point, then continue to pump the Jack to the needed height. 2. Use jack stands (not included) that are capable of supporting the weight of the vehicle being lifted.
ページ6に含まれる内容の要旨
Maintenance (continued) If the Jack is not performing properly, it may have air in the hydraulic system and need to be bled. Never attempt to bleed the Long Frame Jack while it is lifting a vehicle or object. Bleeding and filling the Jack with hydraulic oil. See the Assembly Drawing on page 8. Filling 1. Place the Jack on a flat, level, solid surface. 2. If just filling the Jack, open the Cover (8.1) with a standard slot screwdriver by removing the two Screws (8.5). Swing the Cover
ページ7に含まれる内容の要旨
Handle Assembly Drawing For technical questions, please call 1-800-444-3353. Page 7 SKU 94641
ページ8に含まれる内容の要旨
Jack Assembly Drawing For technical questions, please call 1-800-444-3353. Page 8 SKU 94641
ページ9に含まれる内容の要旨
Parts List bolt bolt For technical questions, please call 1-800-444-3353. Page 9 SKU 94641
ページ10に含まれる内容の要旨
(Continued) Parts List rivets LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lac
ページ11に含まれる内容の要旨
