ページ1に含まれる内容の要旨
60” farm jack
66183
Set up and Operating inStructiOnS
®
distributed exclusively by Harbor freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
failure to do so can result in serious injury.
SaVe tHiS manual.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the expre
ページ2に含まれる内容の要旨
nOtice is used to SaVe tHiS manual address practices Keep this manual for the safety not related to personal injury. warnings and precautions, assembly, cautiOn, without operating, inspection, maintenance and the safety alert cleaning procedures. Write the product’s symbol, is used to address serial number in the back of the manual practices not related to near the assembly diagram (or month and personal injury. year of purchase if product has no num- ber). Keep this manual and t
ページ3に含まれる内容の要旨
c. dress properly. do not wear farm jack Safety Warnings loose clothing or jewelry. keep 1. Be aware of dynamic loading! Sud- your hair, clothing and gloves den load movement may briefly create away from moving parts. Loose excess load causing product failure. clothes, jewelry or long hair can be caught in moving parts. 2. Use the Jack on solid, level surfaces, d. Only use safety equipment that capable of supporting the weight of has been approved by an appro- the Jack, equipment be
ページ4に含まれる内容の要旨
masonry expansion anchors (not in- SpecificatiOnS cluded). Only use materials capable of bearing the weight of the Jack and Jack Capacity 7,000 Pounds load being lifted. Maximum Lift 59-1/4” Minimum Height 6” 4. To raise loads, pull the Ratchet Con- trol Lever (10) up until the mechanism clicks and the Latch engages. unpacking 5. Place the jack’s lift nose completely When unpacking, make sure that under the object being lifted. the item is intact and undamaged. If any parts are missin
ページ5に含まれる内容の要旨
and pump the Handle up and down OR DISTRIBUTOR MAKeS ANy ReP - slowly. The latch will click as the ReSeNTATION OR WARRANTy OF ANy load is lowered. Continue pumping KIND TO THe BUyeR THAT He OR SHe the Handle until the load rests on the IS qUALIFIeD TO MAKe ANy RePAIRS ground. TO THe PRODUCT, OR THAT He OR SHe IS qUALIFIeD TO RePLACe ANy 11. Clean, then store the tool indoors out PARTS OF THe PRODUCT. IN FACT, of children’s reach. THe MANUFACTUReR AND/OR DIS- TRIBUTOR exPReSSL y STATeS
ページ6に含まれる内容の要旨
partS liSt partS liSt part description Qty part description Qty 1 Runner 1 14 Spring Washer 1 2 Lift Column 1 15 Base 1 3 Connecting Rod 1 16 Bolt 1 4 Rocker with Handle 1 17 Bolt 1 5 Washer 1 18 Spring 1 6 Nut 1 19 Pin 2 7 Pin 1 20 Reverse Rod 2 8 Screw 1 21 Spring 1 9 Washer 1 22 Spring 1 10 Ratchet Control Lever 1 23 Washer 1 11 Ratchet Latch 1 24 Nut 1 12 Bolt 1 25 Runner 1 13 Nut 1 26 Washer 1 record product’s Serial number Here: note: If product has no serial number, record month and year
ページ7に含まれる内容の要旨
diagram 7 SKU 66183 for technical questions, please call 1-800-444-3353. Page 7
ページ8に含まれる内容の要旨
limited 90 da Y WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installat
