ページ1に含まれる内容の要旨
01
0090504932V
ページ2に含まれる内容の要旨
Contents Contents How to select the TV program ........................................16 WELCOME 2 How to adjust volume .......................................................16 IMPORTANT INFORMATION ................................ 2 CH.LIST function ..................................................................17 ADJUSTING PICTURE SETTINGS ....................... 17 Installing the Stand ............................................. 5 Changing the Picture Setting ..........................
ページ3に含まれる内容の要旨
Safety Warnings WELCOME Thanks for buying this 26"/32"/40" HD Ready Digital LED LCD TV. This guide will help you to set up and begin using your TV. Firstly, check the contents of your box with the parts checklist below: 26"/32"/40" HD Ready Digital LED LCD TV Remote control AAA battery ×2 Instruction Manual Warranty TV Stand 5XScrews for TV stand Component adapter , Component audio adapter , SCART adapter Cover bottom Now you can get started! IMPORTANT INFORMATION READ ALL INS
ページ4に含まれる内容の要旨
Safety Warnings The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Unplug the power supply and antenna of Do not locate the product close to water the product when there is a rainstorm, or oil, which may cause fire hazards. especially Thunderstorm. Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord away from heat s
ページ5に含まれる内容の要旨
Safety Warnings Don‘t use or store inflammable materials Don’t place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away from electric cable to avoid as this might cause electric shocks. electric shocks. Always make sure that the televisionis well When antenna is used, measures should be plugged as poor electric taken to prevent water connection might
ページ6に含まれる内容の要旨
About your LED LCD TV Installing the Stand Only 26"/32" LED LCD Model Step 1: Carefully place the TV screen face down on a table.We suggest that you place the wrapping material fromthe TV package on the table top to protect the screen from damage. Step2: Remove two screws from the TV. Remove two screws from the TV. Step 3 Push the stand onto the TV. Snap to the positions. Step 4 Attach the screws from the bottom of the stand to the TV. 3 screws( ST4X16F) 2 screws (ST4X12F) EN-5 Digital LED
ページ7に含まれる内容の要旨
About your LED LCD TV Installing the Stand Only 42" LED LCD Model Digital LED LCD Television Instruction Manual EN-6
ページ8に含まれる内容の要旨
About your LED LCD TV About your LED LCD TV Front control panel SOURCE MENU VOL CH Toggles between all the available input 4 CH-/+ Press to change channels. 1 SOURCE sources 5 POWER Press to turn the TV on and off. Press to see an on-screen menu of your TV’s 2 MENU features. 3 VOL-/+ Press to increase or decrease the volume . EN-7 Digital LED LCD Television Instruction Manual
ページ9に含まれる内容の要旨
About your LED LCD TV Rear Terminals Control L R Y Pb P PC PC/DVI AUDIO AUDIO SCART PC IN COMPONENT IN 1 PC input 8 ANTENNA input PC/DVI AUDIO input USB 2 9 3 Component input 0 Optical output 4 Component Audio input A Earphone 5 SCART input B HDMI1 IN input HDMI3 IN input HDMI2 IN input 6 C 7 Common Interface input Digital LED LCD Television Instruction Manual EN-8 HDMI 3 IN D GITAL AUDIO OUT (OPT CAL ) USB ANT IN HDMI 2 IN HDMI 1 IN
ページ10に含まれる内容の要旨
About your LED LCD TV GET TO KNOW YOUR REMOTE CONTROL When using the remote control, aim it towards the remote sensor on the TV. 1 POWER 2 DVD Menu / REC DVD open / close 3 4 Picture Mode 5 Sound Mode 6 Call Screen Display Sleep button 7 8 DTV Audio / NICAM / DVD Audio 9 Aspect Ratio Control button 0 Channel list button Subtitle button A B Program Number Channel selection C Source Exchange Q.VIEW / Swap Channel D V+/V-: Volume selection E F P+/P-: Channel selection G Mute Menu button H GUIDE but
ページ11に含まれる内容の要旨
About your LED LCD TV A Turn on the DVD player and insert a DVD. CONNECTING YOUR B Press the button to select . TV C Refer to the DVD player user guide for operating instructions. ANTENNA CONNECTION Connect your aerial to the back of the TV into the ANTENNA IN socket. DVD IMPROVE YOUR SIGNAL To improve picture quality in a poor signal area, use a signal amplifier (not supplied). CONNECT A DVD PLAYER OR VCR TO YOUR TV CONNECT YOUR PC TO THE TV There are two ways in which you can connect a D
ページ12に含まれる内容の要旨
About y our LCD / LED L CD TV / Getting Started B Press the SOURCE button to select SCART mode. C Close the cover of the battery compartment. C Press the PLAY button on the external device. HDMI INPUT A Connect the cable from the HDMI device to the TV HDMI socket. B Press the SOURCE button to select HDMI mode. BATTERY CAUTION C Refer to the HDMI device user guide for how to Confirm there is no object between the remote control operate. and the remote sensor of the TV set. Sunshine or other
ページ13に含まれる内容の要旨
Getting Started B Insert the batteries into the remote control. Make sure they are inserted the right way around, matching the polarity as indicated inside the battery compartment. SWITCHING YOUR TV ON A Press the POWER button on the right side of the TV once. A red flashing light will appear in the corner of B Press button to select Tuning menu, press the screen. button to enter. B Press POWER on the remote control. The TV will turn C Press button to select Country item. on and
ページ14に含まれる内容の要旨
Getting Started B Press button to select Tuning menu, press button to enter. C Press button to select Digital Manual Search item, press button to enter. D Press button to select Search item, press button is used to select the higher frequency channel. Press button is used to select the lower frequency channel. D Press button to select the Channel. Press OK button to start searching. E And then select Storage To, press button to select the position number you want the
ページ15に含まれる内容の要旨
Getting Started B Press button to select the number position you want to remove to, press yellow button to confirm. C You can press the EXIT button to cancel the changes at anytime. Setting favourite channel A Press button to select the channel, press red button to set your favourite channel. B Press button to select TUNING menu, press button to enter. B You can press the red button to cancel the changes at anytime. C Press button to select CHANNEL EDIT item. Press button t
ページ16に含まれる内容の要旨
Getting Started C Press button to select the guide item. CI Slot Press OK button to enter the submenu, the CAM electronic program guide is displayed. Smart Card You can quickly call up Guide menu by GUIDE button on the remote control. Note Only DTV mode. B Turn on the TV and it will display the below message COMMON INTERFACE if the CA module is detected. Wait for few moments The common interface (CI) slot is designed to accept the until the card is activated. Conditional Access (CA)
ページ17に含まれる内容の要旨
Getting Started F Press button to select the Start Upgrade option and use OK button to enter. Then the TV will restart and search the upgrade information. Note If the upgrade information is received, the TV will begin to upgrade. Or else, the TV will be back the DTV source. G Load the receiver identification. This process may also take several minutes. You can press EXIT button to cancel the download and your TV set will be back Note the DTV source. You can get information from the
ページ18に含まれる内容の要旨
Getting Started Colour CH.LIST function This will adjust the saturation level of the colours to suit your personal preference. Press CH.LIST button on the remote control will display Channel List menu, and then press button to enter. Sharpness Press button to select the channel, and then press This will adjust the sharpness of fine details in the OK button to enter. picture. Tint ADJUSTING PICTURE Allows you to select the colour mix (Tint) of the picture. SETTINGS Note The Tint fu
ページ19に含まれる内容の要旨
Getting Started C Press button to select the item requires Audio Languages adjusting. Press button to select Primary/Secondary item, D Press button to adjust the selection item. and then press button to select the languages you needed. E When you are satisfied with your choice, press the Press button to select Close item, press OK button EXIT button to return to normal viewing or press to close it. MENU button to return to the previous menu. Balance This will adjust the out
ページ20に含まれる内容の要旨
Getting Started at top sides and no alteration, at bottom side. Blue Screen This will select the character background colour. Note DCR The Blue Screen function is only available for ATV mode. Recorder To recorder the DTV program. Details of Recorder are C Press button to select the item requires adjusting. described in the page of 29-31. D Press button to adjust the selection item. DCR E When you are satisfied with your choice, press the Dynamic Contrast Ratio . Press button to se
