ページ1に含まれる内容の要旨
User's Manual
LCD TV
L15X421
L20S421
L20W421
Q41T2001673 3A
ページ2に含まれる内容の要旨
USER’S MANUAL TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ------------------------------------- 2 PREPARATION ---------------------------------------------------------------------- 4 MOUNTING THE TV BASE································································ 5 OPERATING INSTRUCTIONS -------------------------------------------------- 7 Use of the remote control --------------------------------------------------- 7 To use the menus -----------------------------------------------------
ページ3に含まれる内容の要旨
Glossary ------------------------------------------------------------------------- 25 Thank you very much for choosing the LCD TV. We recommend that you take a few minutes to read carefully through this manual before installing and switching on the TV. Please keep this manual in a safe place for your future reference. SAFETY: Lamp Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTAC
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do
ページ5に含まれる内容の要旨
13. The TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 14. Unplug this apparatus during lightning storms or when unused for long periods of time. 15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects
ページ6に含まれる内容の要旨
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Please, make sure to connect the power plug to the wall outlet socket after connecting
ページ7に含まれる内容の要旨
PREPARATION 1. Place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Insert the aerial plug firmly into the aerial socket at the back of the TV.
ページ8に含まれる内容の要旨
MOUNTING THE TV BASE The TV base will be separated with the TV unit. You should Install the base before you use the TV unit. Place the TV on its face on a soft blanket. Install the base stand with three screws. Place the TV on the table. Note: L15X421 does not need the screws to install. 6
ページ9に含まれる内容の要旨
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. 5. Turn the TV on: Turn the main power switch on the right side of TV to ON. Press the secondary power button in front of the TV to turn it on. When the TV is ON, the LED may be green or Red When LED is green, the TV is working; when LED is Red, the TV is in idle mode for energy saving or Power Off.
ページ10に含まれる内容の要旨
USE OF THE REMOTE CONTROL MUTE POWER Temporarily interrupt the Press to turn on/off the sound or restore it. TV. The TV is never completely powered off unless it is physically unplugged. DISPLAY Press this button to 0~9/100 Digit buttons Display Channel number To select a TV channel. on the right-top corner. CH MTS /SAP Press or ( or ) to Press this key to activate browse through the TV Multichannel Television channels,which are not Sound, Stereo or Mono erased. To view a blocked sound. ch
ページ11に含まれる内容の要旨
TO USE THE MENUS 1. Press the MENU button to display or close main menu. 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu or enable/disable the function. 4. Press the MENU button to exit the menu. MAIN MENU Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture Setup, Sound setup, Child Lock Setup, Function Setup and TV setup. When the input source is PC or Component mode, only the Sound Setu
ページ12に含まれる内容の要旨
When the input source is TV mode, the Sound Setup, Picture Setup, Child Lock Setup, Function Setup and TV Setup can be selected; shown in the figure below: Sound Setup (Same as in PC, TV, AV1, S-Video and Components modes) 1. The range of adjusting volume, bass and treble is from 0~100. 2. Select “ON” or “OFF” in sound selection to control the sound output. 3. The range of adjusting Balance is -50~+50; when adjusting from 0 to -50, the sound from the left track fades until silence; when adju
ページ13に含まれる内容の要旨
Picture Setting When the input source is in PC mode, you can select Brightness, Contrast, Position, Video noise, Sharpness, Auto Adjust, Info, Colour Temp., Red, Green, Blue and Reset to default; shown in the figure below: 1. Brightness and Contrast: The range can be adjusted from 0~100. 2. Position: There are two options, Horizontal and Vertical, which can be adjusted from -50 to +50. 3. Video noise: There are two options, Phase and Clock, which can be adjusted from -50 to +50. 4. Sharpn
ページ14に含まれる内容の要旨
When the input source is in TV/AV1/S-Video/ mode, you can select Brightness, Contrast, Colour, Sharpness, Tint, Dyn. skin tone, Colour Temp., Public, Zoom and Reset to default respectively; shown in the figure below: When the input source is in Component mode, you can select Brightness, Contrast, Colour, Sharpness, Tint, White tone, Size and Reset to default respectively; shown in the figure below: 1. Brightness and Contrast: The range can be adjusted from 0~100; use Brightness and Contrast
ページ15に含まれる内容の要旨
4. Tint: The range can be adjusted from -50~+50; use this option to adjust the colour of picture. 5. Dyn. Skin tone: When the Dynamic skin tone is ON, the skin tone of person in the picture becomes more vivid. 6. Colour Temp.: There are three options of colour temperature provided for users - warm, normal and cold. 7. Size: There are various functions provided for zoom in/zoom out. 8. Reset: It is used to reset the picture settings to the factory default mode. Function Setup When the inp
ページ16に含まれる内容の要旨
4. Sleep Timer: Set the sleeping timer and the alert function which indicates the time left. 5. Closed Caption (CC) setting: Select CC1~CC4, TXT1~TXT4 or OFF. 6. Reset: It is used to reset the OSD settings. When the input source is in PC or Component mode, you can select Source OSD, Language, Timers and Reset to default; shown in the figure below: Source OSD, Language, Timers and Reset to default options are operated similarly as the above instructions! Child Lock When the input source is
ページ17に含まれる内容の要旨
You can enter the Child Lock setting to set up the V-Chip level when you enter the correct password: 1. Age: it may be set to Child, Teenager, Youth, Adult, Custom or OFF; when you select Custom, it can be set according to you preference. 2. MPAA Rating: Select the movie ratings from low to high (alert) - G, PG, PG-13, R, NC-17, X and F. 3. PG Rating: Shown in the figure below: The empty box refers to unlocked; the solid box refers to locked. 4. Reset to default: Reset to the factory defaul
ページ18に含まれる内容の要旨
1. Channel nr: Shows the current channel number. 2. Tuning mode: Select the mode of TV signal - Cable\HRC Cable\IRC Cable\ Broadcast. 3. System standard: NTSC-M, Auto. 4. Auto search: Select "Auto Search" to search all signaled channel; when the searching is complete, it stays at the first channel with signal and all channels that have been located are stored. If you would like to stop "Auto Search" during the process, simply by pressing the function button. 5. Fine tune: NTSC-M is seldom u
ページ19に含まれる内容の要旨
CONNECT PERIPHERAL EQUIPMENT FRONT PANEL CONTROL KNOBS Power Key ? : Press to turn on or off the TV. MENU Key ? : Press to show the OSD menu and exit OSD menu at the TV. Down / Up Key ? ? : Select the intended function by pressing these two keys, or switch the channels in the TV mode. + /- Key ? ? : Press to confirm your function selection and adjustment volume. Source Key ? : Press to select your input source. There is a wide range of video and audio equipment that can be connected to your
ページ20に含まれる内容の要旨
PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the screen. 1: VGA audio input 2: VGA input 3: AC power input terminal 4: Headphone outlet 5: AV signal input 6: Left video/audio track input 7: Right video/audio track input 8: S-Video signal input 9, 10 and 11: Pr Pb Y Component signal input 1
