ページ1に含まれる内容の要旨
FPE1507
15” FLAT PANEL LCD TV
FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM 128-8059
Printed in China
PLV1615CS1 / AUDIOVOX / ENGLISH 811-161S91W220
SIZE: 148 X 210 MM
MATERIAL: 80G WOODFREE PAPER
100%
19-04-2007
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER RISK OF ELECTRIC SHOCK DO NOT OPEN SERVICING TO QUALIFIED PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK RISQUE DE CHOC ÉLECTRIQUE NE AVIS PAS OUVRIR HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. The lightning flash with an arrowhead within a t
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 13.Unplug this apparatus during lightning storms or when unused for 2. Keep these instructions. long periods of time. 3. Heed all warnings. 14. Refer all servicing to qualified 4. Follow all instructions. service personnel. Servicing is 5. Do not use this apparatus near water. required when the apparatus has 6. Clean only with a dry cloth. been damaged in any way, such as 7. Do not block any ventilation power-supply cord or plug is openin
ページ4に含まれる内容の要旨
TABLE OF CONTENTS SAFETY PRECAUTIONS ...................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 3 REMOTE CONTROL ........................................................................................... 5 ACCESSORIES ..................................................................................................... 5 REMOTE CONTROL REFERENCE GUIDE ......................
ページ5に含まれる内容の要旨
REMOTE CONTROL USING THE REMOTE CONTROL Point the remote control at the REMOTE SENSOR located on the unit. When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AAA” batteries. BATTERY REPLACEMENT When the batteries become weak, the operating dis
ページ6に含まれる内容の要旨
REMOTE CONTROL REFERENCE GUIDE 4) EXIT Button Press to return to previous menu or exit the menu and return directly to 110 normal viewing. 2 5) CURSOR ( , , , ) Buttons Press to highlight selections on a menu screen and adjust certain settings. 3 ENTER Button Press to confirm selections on a menu 11 screen. CH+/CH– Button 4 12 Press / to change the TV channels. 6) DISPLAY Button 5 Press to change disc status information 13 displayed on the screen. 6 7) MTS Button 14 Press to select MONO sound, S
ページ7に含まれる内容の要旨
UNIT REFERENCE GUIDE 3 17 4 5 6 89 7 10 11 12 1314 15 16 1) Color LCD Screen 4) Removable Base Stand 2) STANDBY/ON Button 5) Power Cord Turns the unit on and off. 6) AV OUT Video Output Jack MENU Button 7) AV OUT Audio Output Jacks Enters and exits the TV menu. (Left/Right) FUNCTION Button 8) AV IN Video Input Jack Selects TV, AV IN, YUV IN or PC IN. – VOL + Controls 9) AV IN Audio Input Jacks (Left/Right) Adjusts the volume level and highlight 10) PC IN MONITOR/VGA Jack selections (Left & Right
ページ8に含まれる内容の要旨
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Connecting an Analog Antenna or Device The tuner in this TV can receive NTSC TV sign
ページ9に含まれる内容の要旨
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, PVR, Camcorder, Game System, etc.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S-VIDEO input on this unit (S-VIDEO cable not included). Make sure you connect both audio and video from t
ページ10に含まれる内容の要旨
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the video (yellow) output from the VCR to the video input on this unit (Video cable not included). Make sure you connect both audio and video from the same VCR to the same input (AV IN).
ページ11に含まれる内容の要旨
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Input To connect to A/V devices such as a VCR, PVR or camcorder: - Connect to a VCR/PVR Connect the right (red) and left (white) audio input from the VCR/PVR to the right (red) and left (white) output on this unit (Audio cable not included). Connect the video (yellow) input from the VCR/PVR to the video output on this unit (Video cable not included). Make sure you connect both audio and video from the same VCR/PVR to the
ページ12に含まれる内容の要旨
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Make sure you connect both audio and video from the same
ページ13に含まれる内容の要旨
CONNECTIONS CONNECTING AN AUDIO AMPLIFIER This connection allows you to use an audio amplifier and external speakers. Connect the right (red) and left (white) audio OUTPUT from this unit to the right (red) and left (white) audio INPUT on your amplifier. Refer to your amplifier’s user manual for more information. Note: To control the audio, both the TV and the amplifier must be turned on, and the volume of the amplifier must be set above 0, or you will not hear any sound. If you want to hear the
ページ14に含まれる内容の要旨
INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the back side is facing up, making sure to place a
ページ15に含まれる内容の要旨
USING HEADPHONES Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. When headphones are connected, no sound will come from the front speakers. Note: Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. Earphones / Headphones (1/8” [3.5mm] diameter plug) UNIT OPERATION TURNING THE UNIT ON FOR THE FIRST TIME The first time for you turning on the unit, the unit wi
ページ16に含まれる内容の要旨
TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, or button (The screen Tint, Sharpness or Color Temperature). Adjust them using the will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN
ページ17に含まれる内容の要旨
TV SETUP VGA Settings in PC Mode Use the or button to select the options (Auto Adjust, H. Position, V. Position, Phase or Clock). Adjust them using the or button. The screen will change to your desired setting. (Press the ENTER or button to confirm Auto Adjust.) - Resolution : 1,024 x 768 max - Refresh Frequency : 60Hz max Video Auto Adjust H. Position 50 Audio H. Position : Center the image by moving it V. Position 50 left or right. Phase 3 Setup Clock 127 V. Position : Center the imag
ページ18に含まれる内容の要旨
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV. Press the Video Tuner Mode Cable Auto Scan ENTER or button to go into the TV settings. Audio Add Channel 3. Use the or button to select the options Channel Skip TV (Tuner Mode, Auto Scan, Add Channel, Channel MTS Stereo Setup Audio Language English Skip, MTS or Audio Language). Adjust them Parental using the or button (The screen will change to your desired setting); or press the ENTER or butt
ページ19に含まれる内容の要旨
TV SETUP TV MODE AV / YUV / DVD MODE Video OSD Language English Video OSD Language English Time Setup Time Setup Audio Audio Caption Caption Restore setting Restore setting TV Setup Setup Parental Parental Setup Select EXIT Exit Setup Select EXIT Exit PC MODE Video OSD Language English OSD Language :Select from English / Time Setup Español / Français. Audio Restore setting Setup Parental Setup Select EXIT Exit Time Setup Setting: Video Time Zone EasternTime Video Time Update Off Time Date 2000
ページ20に含まれる内容の要旨
TV SETUP Caption Setting: Video Analog Closed Caption Off Video Caption Style As Broadcaster Digital Closed Caption Off Font Size Small Audio Audio Font Style Digital Caption Style Style 1 Font Color Green TV TV Font Opacity Solid Setup Setup Background Color Black Background Opacity Translucent Parental Parental Window Color White Window Opacity Transparent Caption Select EXIT Return Digital Caption Style Select EXIT Return Analog Closed Caption : Select the analog closed caption or turn it o
