Grizzly 2 TON LOW PROFILE GARAGE JACK H8093の取扱説明書

ページ1に含まれる内容の要旨

Model H8093
1
2 ⁄2 Ton Low Profile
Garage Jack
Operation
To raise the jack, rotate the pump valve knob
Failure to follow these instructions could clockwise completely, then move the pump han-
result in serious personal injury or death: dle or foot pump up and down. To lower the jack,
slowly rotate the pump valve knob counterclock-
1. DO NOT overload this jack beyond its wise.
rated capacity. Overloading can cause
the jack to collapse and drop the load.
2. ALWAYS support the vehicle with appr

ページ2に含まれる内容の要旨

Maintenance Bleeding the Air Keep the hydraulic rams clean and free of any If the jack becomes spongy or will not rise when dust, dirt, or foreign debris. Abrasive material pumped, then air bubbles may be in the hydraulic stuck to the ram can damage the hydraulic seal system. when the ram is retracted back into the jack. Regularly wipe the hydraulic rams clean with a To remove the air bubbles: lightly oiled rag. 1. Remove the fill plug. The Model H8093 will require hydraulic fluid after long

ページ3に含まれる内容の要旨

H8093 Parts Breakdown and List �� �� �� �� �� �� �� � � � � � � � � � �� �� �� �� �� �� �� �� ��������� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� � �� �� �� �� �� �� �� �� � �� �� �� �� �� REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8093001 COVER 27 PH8093027 SUPPORT ROD 2 PN09M HEX NUT M12-1.75 28 PH8093028 TORSION SPRING 3 PH8093003 FENDER WASHER 12MM 29 PH8093029 EXTENSION SPRING 4 PH8093004 FRONT WHEEL SLEEVE 30 PH8093030 PUMP ASSEMBLY 5 PH8093005 FRONT WHEEL 31 PH8093031 FOOT P

ページ4に含まれる内容の要旨

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ������ ���� �������� ������ ���� ��������� � ���� ������� � ��� ���� ��������� ������� � � ������� �������� � � ������� �������� ������� ��� ����� � � ����������������������� �������� � � � � ����� ������ � ���� � ���� ����� ������ �������