ページ1に含まれる内容の要旨
USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
TX-42F970Z
ページ2に含まれる内容の要旨
www.wde.com Westinghouse Digital Electronics Santa Fe Springs, CA SE-UM-4211-0801
ページ3に含まれる内容の要旨
TABLE OF CONTENT DIGITAL TELEVISION TRANSITION NOTICE .......................................1 FOR YOUR SAFETY ........................................................................................2 PRECAUTIONS AND REMINDERS ...........................................................3 IMPORTANT SAFETY INSTRUCTIONS ...................................................4 PACKAGE CONTENTS .................................................................................5 PREPARATION .................
ページ4に含まれる内容の要旨
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still
ページ5に含まれる内容の要旨
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gene
ページ6に含まれる内容の要旨
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if other Do not cover or block foreign materials are put any vents and openings. inside TV box or if the TV Inadequate ventilation may shorten the life of fell down. the display unit and cause overheating. Unplug immediately if is Prohibit/Avoid opening TV Avoid direct sunlight, dusty, malfunction like no picture, cabinet. high humidity and smoky no video/audio,smoke and areas . bad odor from TV. Don't throw any
ページ7に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
ページ8に含まれる内容の要旨
for digital-to-analog converter boxes. CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a concerter box after June 12,2009,to receive over-the-air broadcasts with an antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more information, call the Federal Communications Commission at 1-8
ページ9に含まれる内容の要旨
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the HDTV. 2. Carefully align and insert the Base to the stand. 3. Insert the screws to the bott
ページ10に含まれる内容の要旨
Please make sure to connect the power plug 3. Remote control: to the wall outlet socket after connecting the Remove the cover of the battery TV to the power cord! compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 1. Install the base stand; place the TV on a solid surface. Min 1 m Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. 4. Power: To prevent any unsafe situations, no naked Insert the power
ページ11に含まれる内容の要旨
PERIPHERAL CONNECTION GUIDE AC POWER 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. PC IN – Connect the video and audio cables from a computer here. 3. A V IN (AV/S-VIDEO) – Connect the input source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the sa
ページ12に含まれる内容の要旨
1 2 3 4 5 6 7 OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROL 1 VOL + VOL +: Press to increase the sound volume level. 2. VOL - VOL - : Press to decrease the sound volume level. 3. CH ▲ CH +: Press to select the next higher Program number. 4. CH ▼ CH - : Press to select the next lower Program number. 5. MENU Menu key: Press to open or exit the OSD (on-screen display) menu. 6. INPUT Source key: Press to select the input source. Power key: Press to turn on / off (standby) the TV set. (Press
ページ13に含まれる内容の要旨
> < TO USE THE REMOTE CONTROL MTS/SAP POWER Press to activate the NTSC TV Press to power ON/OFF sounds, such as: Stereo, SAP or (standby) TV.(Note:1.TV is Mono tone, and languages of never completely power off. Power DTV. unless physically unplugged. 2.Press to turn on TV after Video Comp PC/HDMI TV the power on status, LED had Press to choose the display changed to the blue color and aspect as: Normal, Wide, Zoom stopped flashing.) or Cinema mode. 1 2 3 VIDEO SOURCE 4 5 6 Press rep
ページ14に含まれる内容の要旨
7. FAV Channel Setting: Show the Favorite TO USE THE MENUS Channel List. User can edit (add/delete) the 1. Pr ess the MENU/EXIT button to display favorite channels. or close the main menu VIDEO MENU 2. Use the Navigation Ring to move around The Video menu in most source modes shows to select, adjust or confirm an item in the as below. It provides several video adjustment OSD (On Screen Display) menu. items for user fine tuning the video display. Press the MENU/EXIT button to enter the
ページ15に含まれる内容の要旨
10. Preset: Restore the default audio settings. AUDIO MENU The Audio menu in TV mode shows as below. FEATURE MENU It provides audio adjustment for user to modify The Feature menu in TV mode shows as below. the audio setting. Audio language setting is only This menu gives users the most flexibilities to available with ATSC TV source, the option is satisfy their generally demands. According to disable under other source modes. the various requirements in different source Audio modes, certa
ページ16に含まれる内容の要旨
[Adaptive Contrast] – Choose On or signals can be un-lock through pressing off to adjust the gamma after analyzing the the V-CHIP key on the remote control input signal automatically. and then key in the correct password. Note: This feature is only available in TV, [DCR] – Dynamic Contrast Ratio (DCR) Composite and S-Video source modes. auto adjusts the backlight of the screen. (The default password is: 0 0 0 0.) [SMP] – SMP means "Smart Motion Plus", gives four motion effect degrees, su
ページ17に含まれる内容の要旨
9. Digital Captions: Select a digital caption [Preset] – Restore the default component options. (Service 1-6) setting values. 10. Digital Captions Setup: Provide 13. Reset to Default: Restore all the default numerous options for setting the digital settings. closed caption style in the sub-menu. VGA MENU [Style] – Set to Automatic or Custom mode. If Custom mode is selected, user can This option only shows and is available in VGA modify the detail styles described below. The mode, which
ページ18に含まれる内容の要旨
Regulatory Notices – Federal TIPS Communications Commission Notice Care of the screen This equipment has been tested and found Do not rub or strike the screen with anything to comply with the limits for a Class B digital hard as this may scratch, mar, or damage the device, pursuant to part 15 of the FCC Rules. These limits are designed to provide screen permanently. reasonable protection against harmful Unplug the power cord before cleaning the interference in a residential installation.
ページ19に含まれる内容の要旨
Component INPUT: Rear Component x2: PRODUCT SPECIFICATION Y: 1V(p-p), 75 ohm, including sync. Pr/Cr: ±0.35V(p-p), 75 ohm Pb/Cb: ±0.35V(p-p), 75 ohm NOTE AUDIO: 300mv(rms) * This model complies with the specifications Supported resolutions:1 080p, 1080i, 720p, 480p, listed below. 480i * Designs and specifications are subject to HDMI Terminals: change without notice. HDMI INPUT: Rear HDMI x2; Side HDMI x2 * This model may not be compatible with HDCP compliant features and/or specifications t
ページ20に含まれる内容の要旨
BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image * This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. No power * Check if the TV’s AC power cord i
