ページ1に含まれる内容の要旨
48 inch Farm Jack
Item 06530
Read these instructions before using the tool, and
refer to them as needed while using the tool. Store
this manual in a safe, dry place, and keep it for fu-
ture reference. Keep your invoice with this manual,
Specifications
and write the invoice number on the inside front
cover of this manual.
Lifting capacity: 7000 lb (3175 kg)
(rating established at
General safety instructions ..................... page 2
a height of 1 ft)
Maximum height: 48 in (122 cm)
S
ページ2に含まれる内容の要旨
WARNING: When using tools, basic safety precautions should General safety always be followed to reduce the risk of personal injury. instructions ● Read all instructions before using this tool. ● Keep your work area clean. Cluttered areas invite injuries. ● Consider your work environment. Do not use the jack in damp, wet, or poorly lit locations. Keep your work area well lit. Do not expose the jack to rain. ● Be aware of other people. Do not use the tool near children or animals. Keep childre
ページ3に含まれる内容の要旨
● Use the correct tool. Do not force a small tool or an attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. ● Never stand on the tool. Standing on the tool could cause an injury if the tool is tipped. ● Inspect the tool. Before using the tool, check for damaged parts. A damaged handle or other part should be carefully checked to determine if it will keep the tool from operating properly and per- forming its intended function.
ページ4に含まれる内容の要旨
Refer to figure 1 while following these steps: Lifting a load Step 1. Place the jack on a stable area to prevent shifting or slip- ping. Step 2. Put the reversing switch in the up position to raise loads. Step 3. Place the jack’s lifting nose completely under the object you CAUTION: want to lift. The ratcheting mechanism lets the lifting nose (Refer to Step 5) rise, saving you from having to pump the handle. Dynamic Loading may Step 4. Slowly pump the handle to raise the load. Always keep
ページ5に含まれる内容の要旨
WARNING: When using tools, basic safety precautions should Lowering a load always be followed to reduce the risk of personal injury. Step 1. Put the handle in the upright position before tripping the re- versing latch to lower the load. Step 2. Place the reversing switch in the down position. Step 3. Slowly pump the handle to lower the load. Note: To lower loads one raised level at a time, the jack must be loaded with 110 lb (50 kg) or more. Otherwise, the lifting nose will drop. Maintaining
ページ6に含まれる内容の要旨
Exploded view Item 06530 6
ページ7に含まれる内容の要旨
No. Name Quantity 1 Large Runner 1 2 Steel Bar 1 3 Connecting Rod 1 4 Rocker 1 5 Washer 1 6 Nut 1 7 Pin 1 8 Screw 1 9 Washer 1 10 Reversing Latch 1 11 Reversing Switch 1 12 Screw Bolt 1 13 Nut 1 14 Washer 1 15 Base 1 16 Screw Bolt 1 17 Screw Bolt 1 18 Spring 1 19 Pin 2 20 Reverse Rod 2 21 Spring 1 22 Spring 1 23 Washer 1 24 Nut 1 25 Small Runner 1 26 Spring Washer 1 Item 06530
