ページ1に含まれる内容の要旨
LCD HDTV
• •
Models: e 321Me e420M e e 460Me
user manual
ページ2に含まれる内容の要旨
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. ® HDMI, the HDMI logo and High-Definition Multimedia SRS TruSurround HD and SRS TruVolume are trademarks Manufactured under license from Dolby Laboratories. of SRS Labs, Inc. Tr
ページ3に含まれる内容の要旨
Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at
ページ4に含まれる内容の要旨
E321ME / E420ME / E460ME to rain or moisture, does not operate normally or has been dropped. Important Safety Instructions • Unplug the power cord before cleaning your TV. Your DTV is designed and manufactured to operate within defined design • When moving your TV from an area of low temperature to an area of limits. Misuse may result in electric shock or fire. To prevent your TV from being high temperature, condensation may form in the housing. Wait before damaged, the following instru
ページ5に含まれる内容の要旨
E321ME / E420ME / E460ME • Do not overload power strips and extension cords. Overloading can cause the batteries to leak which can damage the remote control or result in fire or electric shock. injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like. • The wall socket should be installed near your TV and easily accessible. • If any of the following occurs, contact the dealer: • Only power of the marked voltage can be used for your TV. Any other
ページ6に含まれる内容の要旨
E321ME / E420ME / E460ME Television Antenna Connection Protection DTV Transition Advisory If an outside antenna/satellite dish or cable system is to be connected to the TV, The nationwide switch to digital television broadcasting was complete on June make sure that the antenna or cable system is electrically grounded to provide 12, 2009. Analog-only television sets that receive TV programming through an some protection against voltage surges and static charges. antenna now need a converter b
ページ7に含まれる内容の要旨
Table of Contents Changing the On-Screen Menu Language ............................................. 15 Installing the TV .......................................................................1 Setting the TV’s Date and Time ............................................................... 15 Inspecting the Package Contents ........................................................... 1 Setting the Time Zone .......................................................................... 15 Installing
ページ8に含まれる内容の要旨
E321ME / E420ME / E460ME Resetting the Audio Settngs ................................................................ 26 Setting the Sleep Timer ........................................................................... 26 Viewing a USB Photo Slideshow ............................................................ 27 Using the Photo Menu ......................................................................... 27 Using the Modify Photo Menu ......................................................
ページ9に含まれる内容の要旨
Installing the TV 1 Inspecting the Package Contents Installing the TV Before installing your new TV, take a moment to inspect the package contents. After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged. begin installing the TV. Your TV can be installed in two ways: When you have completed your inspection, install the TV. • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mo
ページ10に含まれる内容の要旨
E321ME / E420ME / E460ME 1 3. Using a philips-head screwdriver, Installing the TV on a Wall attach the base to the TV by inserting To mount your TV on a wall, you will need a wall mount. Consult the information and tightening the included screws. below to find the appropriate mount for your TV model: E321ME Screw Size: M6 Screw Length: 12.5mm Screw Pitch: 1mm 4. Move the TV with attached stand into an upright position and place on a flat, Hole Pattern: 200mm x 200mm level, and stable
ページ11に含まれる内容の要旨
E321ME / E420ME / E460ME 1 3. Using a philips-head screwdriver, remove the base by loosening and removing the screws. 4. Gently remove the stand neck. 5. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix A - Specifications for the weight of this TV. 3
ページ12に含まれる内容の要旨
Controls and Connections 2 Rear Panel Right Side Panel USB USB 1 Power HDMI (1,2,3) 2 Menu 3 Channel Up R RCA Audio Out L Channel Down Volume Up AUDIO OUT RGB PC COMPONENT(BETTER) DTV / TV PC Volume Down OPTICAL AUDIO RGB PC CABLE / ANTENNA Digital RGB PC Component/ DTV/TV Input Audio Out Composite Rear Panel USB: Connect a USB thumb drive to view photos. Right Side Panel HDMI (1,2,3): Connect HDMI devices. RCA Audio Out: Connect RCA audio device (soundbar, receiver, etc). Power: Turn the TV o
ページ13に含まれる内容の要旨
E321ME / E420ME / E460ME 2 Remote Control Power/Standby: Turn the TV on or off. Input: Change the input device. A/V Controls: Control external device (CEC-enabled devices only). Info: Display the Info Window. CC: Open the Closed Captioning menu. Menu: Display the on-screen menu. Exit: Close the on-screen menu. Input Power/Standby Arrow: Navigate the on-screen menu and episode guide. A/V Controls OK: Select highlighted menu option. Guide: Display the episode guide (digital channels only). CC Inf
ページ14に含まれる内容の要旨
E321ME / E420ME / E460ME 2 Replacing the Batteries Front Panel 1. Remove the battery cover by pressing gently on the “V” and pushing the cover away from the remote. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. Remote Control Sensor 3. Replace the battery cover. Front Panel Remote Control Sensor: When using the remote, point it directly at this • Use only good q
ページ15に含まれる内容の要旨
Connecting Your Devices 3 Your HDTV can be easily connected to an external device: Connecting Your Devices • DVD or Blu-Ray player Once you have determined the best available connection type on both your • Video game console device and the TV, ensure you have the corresponding cable. • Cable box To connect a device to the TV: • External antenna • Or other device 1. Ensure both the TV and your device are off. 2. Connect the device and the TV. Use the best available connection. See the Befo
ページ16に含まれる内容の要旨
E321ME / E420ME / E460ME 3 Select one of the connection types. Use the cable(s) shown to connect the TV to your device. Select One: HDMI DIGITAL BEST OR RF/ DIGITAL / COAXIAL ANALOG OR RGB ANALOG BETTER OR COMPONENT ANALOG OR COMPOSITE ANALOG AV GOOD Device Connection Chart 8
ページ17に含まれる内容の要旨
Completing the First-Time Setup 4 The first time you turn on the TV, the Setup App will guide you through each of 4. If the TV is connected to an external the steps necessary to get your TV ready for use. antenna, select Antenna, then press Right Arrow and go to step 5. Before you begin the first-time setup: If the TV is connected to a cable • Your TV should be installed and the power cord should be connected service without a set-top box (cable is to an electrical outlet. connected dir
ページ18に含まれる内容の要旨
Adjusting the TV Settings 5 From the TV Settings Menu, you can: Adjusting the Tuner Settings • Adjust the tuner settings From the tuner settings menu you can: • Adjust the TV settings for use with a PC • Change the signal source • Set up the parental controls • Scan for channels • Change the on-screen menu • Scan for new/additional channels language • Start a new channel scan • Change the TV’s date and time • Remove channels from the master list • Turn the VIZIO logo on or off Changi
ページ19に含まれる内容の要旨
E321ME / E420ME / E460ME 5 Scanning for Channels Scanning for New or Additional Channels Before the TV can detect and display channels and their associated information, When a new channel becomes available in your area, you do not have to rescan you must scan for channels. A channel scan may also be necessary when the all channels to add the new channel. Using the add channel feature, you can TV has been moved to an area where different free-to-air broadcast television restrict the scan to new
ページ20に含まれる内容の要旨
E321ME / E420ME / E460ME 5 Adjusting the TV Settings for Use with A PC Using the Parental Controls Your TV can be used to display output from a home computer using the RGB port. The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. These settings are only available when viewing content from the Accessing the Parental Controls Menu RGB port. To access the Parental Controls menu: To adjust the PC settings: 1. Press the MENU button
