ページ1に含まれる内容の要旨
MODELS
MODLS e
// E3D320VX
321VL e
// E3D420VX
// E3D470VX
e371VL
USER
GUIDE
INSTALLING YOUR New TV
CONTROLS & CONNeCTIONS
CONNeCTING YOUR DeVICeS
USING THe ON-SCReeN MeNU
USING THe USB MeDIA PLAY eR
TROUBLeSHOOTING & SUPPORT
HeLP, SPeCS, w ARRANTY & LeGAL
ページ2に含まれる内容の要旨
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS TruSurround HD and SRS TruVolume are Manufactured under license from Dolby HDMI, the HDMI logo and High-Definition trademarks of SRS Labs, Inc. TruSurround Laboratories. Dolb
ページ3に含まれる内容の要旨
Welcome Thank You for Choosing ViZio iMPor TanT safeTY insTruCTions And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should instructions before using your product and retain them for future be observed for the installation, use, and maintenance of you
ページ4に含まれる内容の要旨
with the apparatus. When a cart is used, use • Do not apply pressure or throw objects at your TV. caution when moving the cart/apparatus This may compromise the integrity of the display. The combination to avoid injury from tip-over. manufacturer’s warranty does not cover user abuse or improper installations. • Unplug this apparatus during lightning storms or when unused for long periods of time. • The power cord must be replaced when using different voltage than the voltage speci
ページ5に含まれる内容の要旨
Opening or removing the back cover may expose you to • If any of the following occurs, contact the dealer: high voltages, electric shock, and other hazards. If repair - The power cord fails or frays. is required, contact your dealer and refer all servicing to - Liquid sprays or any object drops into your TV. qualified service personnel. - Your TV is exposed to rain or other moisture. - Your TV is dropped or damaged in any way. • WARNING: Keep your TV
ページ6に含まれる内容の要旨
dTV TransiTion adVisor Y The nationwide switch to digital television broadcasting was complete on June 12, 2009. Analog-only television sets that receive TV programming through an antenna now need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting. Analog-only TVs should continue to work as before to receive low power, Class A or translator television stations a
ページ7に含まれる内容の要旨
Lightning Protection TeleVision anTenna ConneCTion ProTeCTion For added protection of the TV during a lightning storm or when If an outside antenna/satellite dish or cable system is to be it is left unattended or unused for long periods of time, unplug connected to the TV, make sure that the antenna or cable system the TV from the wall outlet and disconnect the antenna or cable is electrically grounded to provide some protection against system. voltage surges and static charges. Power Li
ページ8に含まれる内容の要旨
Table of Contents Setting the Auto Power Off Feature ..................................22 Installing the TV ................................................ 3 Adjusting the Picture Settings ............................................22 Inspecting the Package Contents .....................................3 Adjusting the Advanced Picture Settings ........................23 Installing the TV ...................................................................3 Adjusting the Color Temperature ......
ページ9に含まれる内容の要旨
Resetting the TV Settings ..................................................35 Restoring the TV to Factory Default Settings ....................36 Using Guided Setup .........................................................36 Using the Info Window ........................................................37 Using USB Photo Slideshow............................... 38 Using USB photo slideshow .................................................38 Connecting a USB Thumb Drive to the TV ..............
ページ10に含まれる内容の要旨
Installing the TV 1 InspecTIng The package conTenTs InsTallIng The TV Before installing your new TV, take a moment to inspect the After removing the TV from the box and inspecting the package package contents. Use the images below to ensure nothing is contents you can begin installing the TV. Your TV can be installed missing or damaged. in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Installing the TV Stand Your TV incl
ページ11に含まれる内容の要旨
1 Step 2 Step 3 To install the TV stand: 1. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as carpet, rug, or blanket. 2. Attach the stand neck by inserting and tightening the 4 included hex screws. 3. Align the base with the stand neck. 4. Tighten the thumbscrew into the base. 5. Move the TV with attached stand into an upright position and place on a flat, level, and stable surface. 6. To ensure proper v
ページ12に含まれる内容の要旨
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. E321VL E371VL Screw Size: M6 M6 Screw Length: 20mm 20mm Screw Pitch: 1.0mm 1.0mm 200mm (V) x 200mm (V) x Hole Pattern: 200mm (H) 200mm (H) Be sure the mount you choose is capable of supporting the weight of the TV. After
ページ13に含まれる内容の要旨
Controls and Connections 2 ReaR Panel (Model e321Vl) HDMI - Connect HDMI device. RGB - Connect RGB cable to PC. PC Audio In - Connect 3.5mm PC audio cable. Component - Connect component device. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect RCA cable to audio device, such as sound bar. Component - Connect component device. Stereo Audio In - Connect RCA cable from
ページ14に含まれる内容の要旨
2 ReaR Panel (Model e371Vl) HDMI - Connect HDMI device. RGB - Connect RGB cable from PC. PC Audio In - Connect 3.5mm PC audio cable. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar. Component/Compsite - Connect component or composite device. Rear Panel - E371VL 7
ページ15に含まれる内容の要旨
2 Side Panel POWER - Turn TV off or on. MENU - Open the on-screen menu. CHANNEL UP/DOWN - Change the channel. VOLUME UP/DOWN - Increase or decrease volume level. INPUT - Change input source. HDMI - (E371VL Only) Connect HDMI device. USB - Connect USB thumb drive to play photo, music, or video. Side Panel 8
ページ16に含まれる内容の要旨
2 FRont Panel REMOTE SENSOR When using the remote, aim it directly at this sensor. Front Panel 9
ページ17に含まれる内容の要旨
2 ReMote ContRol inPut PoweR Change the currently-displayed input. Turn TV on or off. a/V ContR olS inF o Control USB photo viewer. Display the info window. CloSed CaPtionS Menu Open the closed caption menu. Display the on-screen menu. exit aRRow Close the on-screen menu. Navigate the on-screen menu. ok Guide Select the highlighted menu option. Display the info window. BaCk V Button Go to the previous on-screen menu. Open the USB photo viewer. Channel uP/down VoluMe uP/down Incre
ページ18に含まれる内容の要旨
2 Replacing the Batteries Replacing Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. • Dispose of old or dead batteries in accordance with local hazardous
ページ19に含まれる内容の要旨
Connecting Your Devices 3 ConneCting A DeviCe (e321vL) Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI-1, HDM1-2, etc). • A
ページ20に含まれる内容の要旨
3 ConneCting A DeviCe (e371vL) Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI-1, HDM1-2, etc). • ANALOG Av CABLe • VIDEO
