ページ1に含まれる内容の要旨
VIZIO M320NV / M370NV User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO M320NV or M370NV television purchase. To get the most out of your
new VIZIO HDTV, read these instructions before making any adjustments, and retain them for future
reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV High
Definition Television.
For assistance, call 877-MYVIZIO (877-698-4946) or e-mail us at www.VIZIO.com.
To purchase or inquire about accessories
ページ2に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference. ! To reduce the risk of electric
ページ3に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual ! Do not overload power strips and extension cords. Overloading can result in fire or electric shock. ! The wall socket should be installed near your HDTV and easily accessible. ! Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock ! Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. ! Unplu
ページ4に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, gro
ページ5に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Advisory of the DTV Transition The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasti
ページ6に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Table of Contents Important Safety Instructions.....................................................................................................................2 Television Antenna Connection Protection ...............................................................................................4 Advisory of the DTV Transition..................................................................................................................5 CHAPTER
ページ7に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual CHAPTER 7 VIEWING PICTURES............................................................................................27 Viewing Pictures......................................................................................................................................27 Adjusting Photo Settings .........................................................................................................................27 Adjusting Photo Settings ........
ページ8に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Slideshow Effect ..................................................................................................................................40 Thumbnail Size ....................................................................................................................................40 Info .......................................................................................................................................................40
ページ9に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. After you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The glass surface can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the glass facing downwards on a surface without prote
ページ10に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Chapter 1 Setting Up Your HDTV Finding a Location for Your HDTV Here are some things you should consider when deciding on a proper location for your HDTV: ! The power consumption of your HDTV is about 57.1W (M320NV) and 56W (M370NV) (AVG ! Use the included power cord. ! When an extension cord is required, use one with the correct power rating. The 3-pronged cord must be grounded and the grounding feature (3rd prong) must not be compromised. ! Install
ページ11に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Wall Mounting your HDTV Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below. 1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to have it handy if you need to call for support. 2. Remove the stand base and neck: a. Disconnect the cables from your HDTV. b. Place your HDTV face down on a soft, flat surface to prevent damage to the sc
ページ12に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Chapter 2 Basic Controls and Connections Front Panel 1. Remote Control Sensor—Point the remote control directly at this window on the lower left corner of your HDTV for the best response to the remote signal. 2. POWER ‘VIZIO’ LIGHT—The VIZIO name lights white when powered on and orange when powered off. Jag Wheel Control The Jag wheel on the side of your HDTV performs all of the same functions you might see as buttons on other TVs, includin
ページ13に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Side Panel Connections 1. USB: ! Insert a FAT/FAT32 formatted USB drive to view pictures. ! Service port for use by a professional service technician. 2. HDMI SIDE—Connect digital video devices such as a DVD player or Set-Top Box through this all digital connector. There are additional HDMI connectors on the back. Rear Panel Connections 1. HDMI 1 and 2 —Connect digital video devices such as a DVD player or Set-Top Box through this all digi
ページ14に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries: ! Only use AAA batteries. ! Do not mix new and old batteries. This may result in cracking or leakage that m
ページ15に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Remote Control Buttons POWER ( )—Press to turn the TV on from the Standby mode. Press it again to return to the Standby mode. Device Buttons: ! DVD—Press to select a DVD player that has been programmed to work with this remote. ! AUDIO—Press to select a Home Theater System or Audio Amplifier that has been programmed to work with this remote. ! CABLE—Press to select a Cable or Satellite Set Top Box that has been programmed to work with this remote.
ページ16に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual VOL +/- —Press to turn the volume up or down. MEDIA – Use this button to access the USB drive to view your pictures. MUTE—Press to turn the sound on and off. LAST— Press to recall the previously viewed channel. CH +/- —Press to change the channels up or down HDMI—Press to select the HDMI input. Press repeatedly to cycle between both HDMI inputs. AV—Press to select the AV input. TV—Press to select the TV input. Number Button Pad—Press to select a ch
ページ17に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Chapter 5 Using your HDTV for the first time Select an Input Source 1. Select the input source for your HDTV by pressing the INPUT button on the remote control or the front of your TV. Pressing this button will cycle you through the following options: TV, AV, Comp, HDMI-1, HDMI- 2, RGB, and Media. 2. Turn on your device and you will see a picture on your HDTV. If there is no picture, make sure you have selected the correct input on your HDTV. N
ページ18に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Viewing Digital TV Program Information When the channel is changed or when you press the GUIDE button, an information header is shown over the picture for a few seconds. Each press of the GUIDE button will display more information about the program: 18 www.VIZIO.com
ページ19に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Chapter 6 Connecting Equipment Which Video Connection Should I Use? You have six options for connecting your video equipment box to your HDTV from a basic connection to the most advanced for digital displays. Based on your Home Theater configuration, you can decide which option is the right one for you. Connection Connector Description Quality (type) HDMI delivers the best image quality of any of the cable types available Best and it’s all done o
ページ20に含まれる内容の要旨
VIZIO M320NV or M370NV User Manual Connecting Your Cable or Satellite Box Using HDMI (Best) Cable and Satellite Boxes that have a HDMI digital interface should be connected using HDMI for optimal results. To maintain image quality, use a VIZIO certified HDMI cable. This cable is available in 6, 15, and 30 foot lengths. Visit www.VIZIO.com or call 877-MYVIZIO (877-698-4946) for details. 1. Turn off your HDTV and Cable/Satellite box. 2. Connect an HDMI cable to the HDMI output of y
